3M AP-DWS1000 LF - Manuals - manualsarea.com

Page 3 - SAFETY INFORMATION; EXPLANATION OF SIGNAL WORD CONSEQUENCES; WARNING; CAUTION; installation of this product.; Do not; adequate disinfection before or after the system.; Do not; when selecting the position to mount the filter bracket.

SAFETY INFORMATION EXPLANATION OF SIGNAL WORD CONSEQUENCES WARNING Read, understand, and follow all safety information contained in these in-structions prior to installation and use of the AP-DWS1000 & AP-DWS1000 LF Drinking Water Filtration Systems. Retain these instructions for future referenc...

Page 4 - IMPORTANT NOTES; • Installation and Operation of this system

CAUTION IMPORTANT NOTES To reduce the risk associated with property damage due to water leakage: • Read and follow the Instructions in this manual before installation and use of this system. • Installation and Operation of this system MUST comply with all state and local plumb- ing codes. • Protect ...

Page 5 - This manual explains installation and operation of the Aqua-Pure; Parts Included: Model AP-DWS1000 Drinking Water System; • Failure to follow instructions may void warranty.; connections. See page 3 for list of states.

4 Introduction: This manual explains installation and operation of the Aqua-Pure ® AP-DWS1000 & AP- DWS1000 LF Drinking Water Filtration Systems. Please read each section of this manual carefully. The Aqua-Pure AP-DWS1000 & AP-DWS1000 LF Drinking Water Filtration Systems are designed to conn...

Page 6 - Installing the Faucet; Stainless steel bezel; Determine undersink mounting location; Tighten screws evenly and firmly, brackets should be parallel.; selecting the position to mount the filter bracket.; MUST; comply with all state and local plumbing codes.

5 1) Install Drinking Water System Faucet (Refer to Figure 4, Page 11): Instructions for drilling 9/16” diameter hole through counter top or stainless steel sinkA. Locate area to be drilled. Mark center of the hole with center punch.B. Drill hole with 9/16” drill bit suitable to counter top material...

Page 7 - tened securely to the bracket.

6 B. To pierce soft copper tubing, turn handle to the right (clockwise) several times until it stops. The valve is now closed. Turning the handle to the left (counterclockwise) will open the valve. C. Assemble insert, plastic sleeve and compression nut as shown onto yellow tubing and fasten securely...

Page 8 - Water leaks from threaded connection:

7 1. The glassy layer of porcelain/enamel/ceramic must be scored through to the metal base creating a disc. 2. This disc must be removed while protecting the surrounding decorative coating against chipping or fracturing. 3. The base metal must be drilled through to complete the hole. Procedure: A. M...

Page 9 - • Relieve pressure; Ensure; all tubing and fittings are secure and free of leaks.; tt

8 Quick Connect Guide (Figure 1) ‘Push-In’ Tubing Connector(Quick Connect Fittings) This product is outfitted with user friendly ‘Push-In’ connectors. Proper use of the con - nectors is shown in the diagrams. It is most important that the tubing selected for use with these connectors be of high qual...

Page 10 - Description; Self-Piercing Water Valve

9 Reference # Part # Description 1 69968-31 Self-Piercing Water Valve 2 36897-82* 1/4” Inlet Yellow Tubing (price per ft.) 3 55851-02 AP-DW80 & AP-DW90 Cartridge Set 4 36897-62* 1/4” Outlet Blue Tubing (price per ft.) 5 69888-42 Faucet 6 68841-21 Shroud 7 68871-01 Head 8 85-400201 UTC Shroud Mou...

Page 11 - Standard Installation Overview

10 Stainless BezelRubber Washer Countertop Plastic Backing Spacer Star Washer Hex Nut FILTER 1 FILTER 2 17" (43.2 cm) Minimum 2" (5 cm) Minimum 6 3 4 2 1 Standard Installation Overview 1. Install DWS Faucet 2. Mount System 3. Install Feedwater Valve 4. Making Connections 5. Test System 6. Fl...

Page 12 - Install Drinking Water System Faucet (Figure 4)

11 Install Drinking Water System Faucet (Figure 4) Stainless BezelRubber Washer A Stainless BezelRubber WasherCountertop B Stainless BezelRubber WasherCountertop Plastic Backing Spacer Star Washer Hex Nut C Stainless BezelRubber WasherCountertop Plastic Backing Spacer Star Washer Hex Nut D Install F...

Page 14 - check connections or repeat cartridge installation.; must; be replaced every six months or at the specified ser-

13 Cartridge Change Instructions (Refer to Corresponding Dia-grams Below) 1. Turn water supply off at saddle valve or at undersink cold water line, and remove protective shroud from bracket. 2. Reset shut-off meter by pushing in knob and turning to the right (clockwise) until the arrow on the top of...

Page 16 - Limited One Year Warranty

3M is a trademark of 3M Company. CUNO and Aqua-Pure are trademarks of 3M Company used under license. © 2009 3M Company. All rights reserved. ® y n a p m o c M 3 a CUNO Incorporated 400 Research Parkway Meriden, CT 06450 USA Toll Free: 1-800-222-7880 Worldwide: 203-237-5541 Fax: 203-238-8701 www.aqua...