3M 8749 - Manuals

4 PART NAMES THE PROJECTOR Indicates the correspondingreference page Power Switch AC Inlet (to the Power Cord) Ventilation Openings (Intake) Zoom RingFocus Ring Remote ControlSensor Slide lens door Speaker Handle Hook STANDBY/ON Button KEYSTONE Button Foot Adjuster Button Filter Cover Rear Foot Adju...

5 THE REMOTE CONTROL RGB button 15 VIDEO button 15 KEYSTONE button 20 ENTER button 23 RESET button 18 BLANK button 22 LASER button 5 MOUSE / RIGHTButton 24 Disk Pad 2 MENU button 23 AUTO button 19 , , , Cursor buttons 23 POSITION button 18 ASPECT button 22 MAGNIFY button 21 ESC button 23 FREEZE butt...

6 Angle Adjustment 1 L i f t u p t h e f r o n t s i d e o f t h eprojector, and pressing the foota d j u s t e r b u t t o n , a d j u s t t h eprojection angle. 2 Release the button to lock at the desired angle. 3 Turn the rear foot adjuster to adjustthe left-right slope. Do not force thefoot adju...

7 Refer to the illustrations and tables below to determine the screen size andprojection distance. Adjusting the Screen Size and Projection Distance If 4:3 aspect ratio 4 3 The values shown in the table are calculated for a full size screena:Distance from the projector to the screen (±10%)b:Distance...

8 Display monitors 12 DVD players 11 VCRs 11 Laptop computers 10 Desktop computers 10 Indicates thecorrespondingreference page ATTENTION Precautions to observe when connecting other devices to the projector : • Whenever attempting to connect other devices to the projector, please thoroughly read the...

9 Ports and Cables Refer to the table below to find out which projector port and cable to use for connecting agiven device. Use this table for determining which cables to prepare. About Plug-and-Play Capability • This projector is compatible with VESA DDC 1/2B. Plug-and-Play can be achieved by conne...

10 B A AUDIO IN AUDIO cable RGB cable AUDIO OUT RGB IN Analogue RGB OUT AUDIO IN VIDEO IN S-VIDEO IN AUDIOIN AUDIO OUT 1 1 2 2 USB RGB IN RGB OUT CONTROL A B Laptop computer B A D C USB IN USB OUT AUDIO IN AUDIO OUT RGB IN Analogue RGB OUT CONTROL IN CONTROL OUT If connecting to a USB port equipped ...

11 B C A If using a component video connection If using an audio/video connection COMPONENT VIDEO IN COMPONENT VIDEO OUT AUDIO/VIDEO IN AUDIO/VIDEO OUT S-VIDEO IN S-VIDEO OUT If using a S-video connection COMPONENT cable AUDIO/VIDEO cable S-VIDEO cable AUDIO IN VIDEO IN S-VIDEO IN AUDIOIN AUDIO OUT ...

12 RGB cable A RGB OUT RGB IN AUDIO IN VIDEO IN S-VIDEO IN AUDIOIN AUDIO OUT 1 1 2 2 USB RGB IN RGB OUT CONTROL A CONNECTING YOUR DEVICES (continued) Connecting to a Display Monitor Display monitor 01CPX385SW/EN最終    02.11.20  9:30  AM    ページ 12

1 Remove the batterycover Push the knob while liftingup the battery cover in thedirection of the arrow. Insert the batteries Align and insert the two AAbatteries (that came with theprojector) according to their plusand minus terminals (as indicated in the remote control). Close the batterycover Repl...

14 1 Make sure that the power cord is firmly andcorrectly connected to the projector and outlet 2 Turn on the projector's power Set the power switch to [ | ] (ON). The projector will goto STANDBY mode and the POWER indicator will light tosolid orange. 3 Press the STANDBY/ON button (controlpanel or r...

RGB 15 6 Use the zoom ring to adjust thescreen size 7 Use the focus ring to focus thepicture 5 If selecting RGB inputPress the RGB button Press this button to toggle between thedevices connected to RGB IN 1 and 2.As illustrated below, each time youpress the RGB button, the projectorswitches between ...

16 STANDBY/ON LASER BLANK RGB VIDEO AUTO MENU ENTER KEYSTONE RESET FREEZE ASPECT ESC MAGNIFY POSITION OFF ON VOLUME MUTE 1 Press the STANDBY/ON button (controlpanel or remote control) The message "Power off?" will appear on the screen for approximately 5 seconds. 3 Check that the POWER indic...

17 STANDBY/ON LASER BLANK RGB VIDEO AUTO MENU ENTER KEYSTONE RESET FREEZE ASPECT ESC MAGNIFY POSITION OFF ON VOLUME SEARCH MUTE 1 Press the VOLUME button As illustrated on the right, a dialog willappear on the screen to aid you in adjustingthe volume. 1 Press the MUTE button As illustrated on the ri...

18 STANDBY/ON LASER BLANK RGB VIDEO AUTO MENU ENTER KEYSTONE RESET FREEZE ASPECT ESC MAGNIFY POSITION OFF ON VOLUME SEARCH MUTE 1 Press the POSITION button As illustrated on the right, a dialog will appear on the screento aid you in adjusting the position. 2 Use the , , , buttons to adjust the posit...

19 The automatic adjustment operation requires approximately 10 seconds. Also, please note that it may not function correctly with some input signals. NOTE 1 USING THE AUTOMATIC ADJUSTMENT FEATURE Press the AUTO button Horizontal position (H. POSIT), vertical position (V.POSIT), clock phase (H. PHAS...

20 • This function may not be work well with some types of input signals.• The adjustable range for correcting keystone distortions will vary with the type of input signal. NOTE CORRECTING KEYSTONE DISTORTIONS 1 Press the KEYSTONE button As illustrated on the right, a dialog will appearon the screen...

21 The projector will automatically exit from MAGNIFY mode if either the INPUT SELECT, AUTO, ASPECT or VIDEO feature is used, or, if there is a change in the input signal's state. NOTE • The projector will automatically exit from FREEZE mode if either the POSITION, VOLUME, MUTE, AUTO, BLANK ON/OFF o...

22 SIGNAL SEARCHING SELECTING THE ASPECT RATIO TEMPORARILY BLANKING THE SCREEN 1 Press the SEARCH button When you press the SEARCH button, the projector beginssearching for input signals. If it detects an input signal, thesearch will cease and the projector will project the detectedsignal. If the pr...

23 USING THE MENU FUNCTIONS 1 Press the MENU button The menu display appears on the screen. Theprojector has the following menus: MAIN,PICTURE-1, PICTURE-2, INPUT, SCREEN, andOPTION. Select a menu using the / buttons. The current settings of the items that can be manipulated via theselected menu app...

MAIN Menu Item Description BRIGHT Adjust Brightness: Light ⇔ Dark CONTRAST Adjust Contrast: Strong ⇔ Weak ASPECT Select Aspect Ratio: At RGB Input or Hi-Vision 1125i(1035i/1080i)/750p of COMPONENT VIDEOInput:4:3 ⇔ 16:9 At VIDEO Input, S-VIDEO Input or 525i/525p/625i of COMPONENT VIDEO Input:4:3 ⇔ 16...

PICTURE 1 Menu PICTURE 2 Menu With the PICTURE 1 menu, the five items shown in the Tablebelow can be performed.Perform each operation in accordance with the instructions in theTable. With the PICTURE 2 menu, the five items shown in the Tablebelow can be performed.Perform each operation in accordance...

MULTIFUNCTIONAL SETTINGS (continued) INPUT Menu With the INPUT menu, the four items shown in the Table below can beperformed. With inputting of RGB IN 1 and RGB IN 2 signals, thehorizontal and vertical frequencies of the signals will be displayed on theinitial screen of the INPUT menu.Perform each o...

SCREEN Menu With the SCREEN menu, the five items shown in the Table below can be performed.Please perform each operation in accordance with the instructions in the Table. 27 SCREEN Menu Item Description BLANK Selection of BLANK Screen: MyScreen ⇔ ORIGINAL ⇔ . . ⇔ . . ⇔ . . The BLANK Screen may be vo...

MULTIFUNCTIONAL SETTINGS (continued) OPTION Menu With the OPTION menu, the five items shown in the Table belowcan be performed.Please perform each operation in accordance with the instructionsin the Table. MENU : SELECT MAINPICTURE-1PICTURE-2INPUTSCREENOPTION VOLUMEAUTO OFFWHISPERLAMP TIMEFILTER TIM...

2 9 You can use the remote control as a simplified mouse or keyboard. OPERATING THE PC SCREEN CAUTION Mistaken use of the mouse/keyboard control could damage your equipment. • Only connect to a PC.• Before connecting, read the manuals of the device you will connect.• Do not plug or unplug the connec...

30 THE LAMP HIGH VOLTAGEHIGH TEMPERATUREHIGH PRESSURE Before replacing the lamp, check the serial number of the replacement lamp bulb (sold separately: 78-6969-9464-5 ), then contact your local dealer. Before replacing the lamp, turn off the power, and unplug the power cord, then wait at least 45 mi...

31 • The LAMP indicator is also red when the lamp unit reaches high temperature. Before replacing the lamp, switch power OFF, wait approximately 20 minutes, and switch power ON again. If the LAMP indicator is still red, replace the lamp. NOTE Replacing the lamp All projector lamps will wear out even...

32 THE AIR FILTER Caring for the air filter The air filter should be cleaned about every 100 hours. If the LAMP indicator andTEMP indicator blink red simultaneously, or a message prompts you to clean the airfilter when you turn on the unit, the filter needs to be cleaned. (See "RelatedMessages&#...

33 Replacing the air filter If the soiling will not come off the air filter, or it becomes damaged, then it needs to bereplaced. Please contact your local dealer, after confirming the model of yourseparately sold replacement air filter ( sold separately: 78-8118-8896-1 ) . 1 Turn off the projector, ...

34 Fixing the Handle THE HANDLE Caring for the inside of the projector : In order to ensure the safe use of your projector, please have it cleaned and inspected byyour local dealer about once every 2 years. Never try to care for the inside of the unityourself. Doing so is dangerous. Caring for the l...

WHAT TO DO WHEN YOU THINK A MACHINE DEFECT HAS OCCURRED Related Messages When the unit's power is ON, messages such as those shown below may be displayed. Whenany such message is displayed on the screen, please respond as described below. 35 Note 1: Although this message will be automatically disapp...

Regarding the Indicator Lamps Lighting and flashing of the POWER indicator, the LAMP indicator, and theTEMP indicator have the meanings as described in the Table below.Please respond in accordance with the instructions within the Table. POWER indicator LAMP indicator TEMP indicator Description The o...

Phenomena That May Easily Be Mistaken for Machine Defects Before requesting repair, check in accordance with the following chart.If the situation cannot be corrected, then contact your dealer. Although bright spots or dark spots may appear on the screen, this is a unique characteristic of liquid cry...

Dimension Diagram Unit : mm 298 228 241.5 94.6 54 76.5 76 AC N Item Specification Product name Liquid crystal projector Liquidcrystalpanel Panel size 2.3 cm (0.9 type) Drive system TFT active matrix Pixels 786,432 pixels (1024 horizontal x 768 vertical) Lens Zoom lens F=1.7 ~ 2.0 f=27.3 ~ 32.8 mm La...

Accessories ................................................................ Part Number 39 ACCESSORIES Not Included with Basic Packet ................................ Part Number How to Order Please order these parts through your dealer, or contact 3M Customer Service at the following number: In U....