3M 711/811 - Manuals - manualsarea.com

Page 3 - Table of Contents

1 Table of Contents Safety Information .................................................................................... 2 Intended use....................................................................................................................................2 Safety Label Locations ........

Page 4 - Safety Information; Intended use; EXPLANATION OF SIGNAL WORD CONSEQUENCES; Warning: Risk of Electric Shock

2 Safety Information Read, understand, and follow all safety information contained in these instructions prior to installation and use of the 3M™ Conversion Station Model 711 and Model 811. Retain these instructions for future reference. Intended use The 3M Conversion Station Model 711 and Model 811...

Page 5 - WARNING; To reduce the risk associated with hazardous voltage:; CAUTION; To reduce the risk associated with eye related injury:; IMPORTANT NOTES; A rejected tag is identified with a hole punched through it.; IMPORTANT NOTE

3 WARNING To reduce the risk associated with hazardous voltage: Do not attempt to modify or repair — no user serviceable parts inside — contact 3M Service for repair. To reduce the risk associated with back strain related injury: Follow safe lifting procedures. To reduce the risk associated with a f...

Page 6 - Safety Label Locations; On; Japan

4 Safety Label Locations FCC ID: DGF-DCS711 This device complies with Part 15 of the FCC Rules. Operation is subject to thefollowing two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interferencethat may cause und...

Page 7 - Specifications; Shipping Size

5 Specifications Shipping Size Tag Types Height 47.5 inches [1207mm] Width 42.5 inches [1080mm] Depth 30.0 inches [762mm] Weight 338 lbs. [154 kg] Model 711/ 811 Height 55.25 in. [1403mm] Width 30.0 in. [762mm] Depth 18.0 in. [457mm] Weight 150 lbs. [68.2 kg] Operating and Storage Temperature Storag...

Page 8 - Components; Item

6 Components 711-811_HG_001 1 2 3 4 5 6 7 8 9 10 11 12 Figure 1 711/811 Components Item Description Item Description 1 Scanner 7 Keyboard 2 Touch screen monitor 8 Memory card drive 3 Tag dispenser 9 Anti tip hardware 4 12-volt power supply 10 Computer 5 Circuit breaker box 11 RFID reader 6 Mouse 12 ...

Page 9 - Using the Tag Dispenser; Automatic Tag Dispenser components

7 Using the Tag Dispenser IMPORTANT NOTES Do not bend, fold, or damage RFID tags because this may cause premature tag failure. If you discover a tag with a hole punched through it, do not use the tag. A hole indicates that the tag was identified as defective during inspection. If you receive a syste...

Page 10 - Operator tool kit; Tool Kit

8 Operator tool kit The Conversion Station comes with a tool kit attached to the inside right front door. Tool Kit 711-811_HG_003 The tool kit contains: Three 3M RFID tag threading tools) Three 3M tag templates to help you correctly place 3M RFID tags in books Small screwdriver Tweezers 711-811_HG_0...

Page 11 - Loading the tag dispenser with tags

9 Loading the tag dispenser with tags 1 Open the Conversion Station cabinet doors and locate the tag dispenser. 2 Locate the supply role shaft. 711-811_HG_002 Tag Dispenser 10 Supply Roll Shaft 3 Rotate the supply roll shaft until it is in the up position. 4 Release the stop lever so that it drops i...

Page 13 - Cleaning the tag dispenser opening; thumb

11 Cleaning the tag dispenser opening Use a soft cloth to remove any dust from the tag dispenser opening. Cleaning the spring plate (tensioner/guide) Clean the spring plate approximately every 5,000 tags or as necessary. 1 Remove the spring plate. Hold the spring plate and remove the four (4) thumb ...

Page 14 - Troubleshooting Tag Dispenser problems; Problem

12 Troubleshooting Tag Dispenser problems The tag dispenser switch controls the motor used to advance tags to the feeder opening on the top of the Conversion Station. The tag dispenser switch has three positions: ON (up) position OFF (middle) position JOG (down) position 711-811_HG_005 Switch Proble...

Page 15 - Service; M Service phone numbers; Tag types; Phone numbers

13 Service 3M Service phone numbers In the United States Library Systems: 1-800-328-0067 (Option 1) In Canada English 1-800-268-6235 Français 1-800-567-3193 In other countries Call your local 3M office. To order tags Tag types Make sure that you order the correct type of tag for your equipment: The ...

Page 16 - Conversion Station Model 711-811 Owner’s Manual