3M 3125 - Manuals - manualsarea.com

Page 2 - Submitting a Warranty Claim

HOW TO HANDLE • This tool is designed for repairing painted automobile bodies and parts as well as FRP (Fiber Reinforced Plastic) and wood. It should not be operated in water or in an excessive wet application. • Check for loose screws and missing parts before operation. • Connect air hoses after cl...

Page 3 - b. OPERATING INSTRUCTION; At work; transported, be sure to remove the air hose.; During use; Adjust it according to the work.; After use; be sure to remove the air hose and store the tool in a safe, dry place.

b. OPERATING INSTRUCTION At work - Check to see that the workplace is in order and is appropriate for the work. - Inspect for loose parts. - Confirm the proper air pressure (0.4 to 0.65 MPa) - Tighten all couplings securely so that they will not be loosened by vibration. - Attach buffing material or...

Page 4 - c. Spare Parts information

Page 5 - Special tools for the repair operation – see Page 10

c. Spare Parts information - continued PARTS No. CODE ITEM QTY. 3 S3305 Spring 1 4 S3322 Air Regulator 1 5 S3323 O-Ring (P-7) 1 6 P101 O-Ring (P-10A) 1 8 S3401 Throttle Lever 1 9 S3402 Roll Pin 1 10 696ZZ Bearing (696ZZ) 1 11 S3326 Rear End Plate 1 12 S3411 Roll Pin 2 13 S3333 Rotor Collar 1 14 6074...

Page 6 - d. Disassembly method

d. Disassembly method Disconnect air hose first. Disassembling the tool without disconnecting air hose is very dangerous. 1. Remove the skirt - Remove four screws (43) from skirt (42) Hook-it side. - Remove the screw (40) from the skirt clamp (39) and remove the skirt band. - Remove the skirt (42). ...

Page 9 - to help the disassembly); Clamp nut wrench

8. Valve disassembly - Remove plug (62). Remove regulator (4) and o-ring (5). Remove o-ring (6) from valve plug (62). Remove valve assembly (3,2,30). - Remove spring (3) and 0-ring (30) from valve assembly. - Remove throttle valve (61). 9. Special tools for the repair operation ( to help the disasse...

Page 10 - e. Guideline for parts exchange

e. Guideline for parts exchange Parts no. Figure no. (ID number) Part name Qty Guideline for parts exchange 3 3305 Spring 1 When bent or damaged, or when it doesn’t work properly 4 3322 Air regulator 1 5 3323 O ring (p-7) 2 When damaged 6 3501 O ring (P-10A) 1 When damaged 8 3401 Throttle lever 1 Wh...

Page 11 - assemble the gears to hit tooth to tooth.; Repair services after Warranty period & Parts supply contact

Parts no. Figure no. (ID number) Part name Qty Guideline for parts exchange 38 150406 Tras bis (M4 x 6) 1 39 60736 Skirt band 1 When the deformed or damage is found. 40-1 110310 Screw (M3 x 10) (1) 40-2 2103 Nut (M3) (1) 41 Cap 1 42 60733 Skirt 1 When cut or cracked or worn-out. 43 130305 Screw (M3 ...

Page 12 - Trouble shooting Chart

Trouble shooting Chart No run No sound Regulator problem or constricted airline Check Regulator SoundAir motor rotates(manually) Vane stuck because of dirt or oil If it won't rotate manually, service is required Won't rotate Motor is locked up, because of dirt It is required overhaul Rotates Rotates...