3M 300cf - Manuals

2 Equipment Warranty and Limited Remedy: THE FOLLOWING WARRANTY IS MADE IN LIEU OF ALLOTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIEDWARRANTY OF MERCHANTABILITY, THE IMPLIED WARRANTY OF FITNESS FOR A PARTICULARPURPOSE AND ANY IMPLIED WARRANTY ARISING OUT OF A COURSE ...

3 Important – In the event the following safetylabels are damaged or destroyed, they mustbe replaced to ensure operator safety. Alabel kit, part number 78-8119-6942-3 isavailable as a stock item or individual labelscan be ordered. See Parts Illustration/List,pages 36 and 37. Important Safeguards Thi...

4 Important Safeguards (Continued) The "Operation Mode" label, shown in Figure 1-6 isattached on the left side of the machine frame belowthe Manual/Automatic switch. The label indicatesthe correct position of the switch for manual orautomatic operation. The "Ram Adjust" and "Box ...

6 Specifications (Continued) Machine Dimensions A 1 H1 2 H2 2 L1 3,5 L2 4,5 W1 W2 Minimummm 120 610 685 1375 1385 615 765 [Inches] [4.81] [24.0] [27.0] [54.1] [54.6] [24.3] [30.2] Maximummm 120 775 850 1705 1715 615 765 [Inches] [4.81] [30.5] [33.5] [67.1] [67.6] [24.3] [30.2] 1 Casters are optional...

7 Receiving And Handling For future reference, record machine serial numberon front cover of this manual in the space provided. The following instructions are presented in the orderrecommended for setting up and installing thecase former, as well as for learning the operatingfunctions and adjustment...

8 Installation and Set-Up (Continued) Figure 2-2 – Mounting Bracket Installation

9 Installation and Set-Up (Continued) 4. Pneumatic Connection The case former requires a 5.2 bar gaugepressure [75 PSIG], 6.0 m 3 /h @ 21 ° C, 1.01 bar [3.5 SCFM] compressed air supply. The customer supplied air supply hose shouldbe connected to the barbed fitting on the On/Offvalve and clamped tigh...

11 Operation Figure 3-1 – 300cf Case Former Components IMPORTANT – Before operating the case former, read the "Important Safeguards", pages 3-4 and"Warnings" on page 12 as well as all of the "Operation" instructions. Refer to Figure 3-1 to acquaint yourself with the various c...

12 Operation (Continued) Figure 3-2 – Adjustable Carton Ejector WARNINGS 1. Turn air supply off before performing any adjustments or maintenance on the machine. 2. Turn air supply off when machine is not in use. 3. The case former contains flap folders and sliding components that operate in rapid su...

13 Operation (Continued) Emergency Stop Button The E-Stop button can be pushed at any time tostop machine operation and bleed air from thepneumatic system. Reset Button When case former is stopped with E-Stop, the ResetButton must be pushed to restore air supply to themachine. Box Centering Guide Th...

15 Maintenance Note – Never attempt to remove dirt frommachine by blowing it off with compressed air.This can cause dirt to be blown into criticalmachine components and cause premature wear.Never wash down or subject machine toconditions causing moisture condensation asserious equipment damage could...

16 Pneumatic Diagram On/Off Valve: SMC EVHS2500 Filter-Regulator: SMC EAW2000 Shuttle Valves: SMC EVZA5220 Roller Valves: Telemecanique PXC-M52 Flow Controls 1 and 2: Legris 7665-56-11 Pressure Regulator 2: SMC EAR111 Manual-Auto Select Valve: Telemecanique PXB-B1011BA2 Flow Control Valves 3 and 4: ...

19 Parts and Service Information Labels In the event that any labels are damaged or destroyed, they must be replaced to ensure operator safety. Alabel kit, part number 78-8119-6942-3 is available as a stock item. It contains all the safety labels used on the300cf Case Former or separate labels can b...

21 Replacement Parts Illustrations and Parts List 300cf Case Former, Type 29800Frame Assemblies 1. Refer to first illustration, Frame Assemblies, for the figure number that identifies a specific portion of themachine. 2. Refer to the Figure or Figures to determine the individual parts required and t...

25 Figure 5420 Ref. No. 3M Part No. Description 5420-1 78-8119-6529-8 Conveyor – Bed, W/English Language Label 5420-2 78-8100-0914-8 Leg Assembly 5420-3 78-8100-0915-5 Leg – Outer 5420-4 78-8100-0916-3 Leg – Inner 5420-5 78-8060-8480-8 Pad – Foot 5420-6 78-8055-0867-4 Screw – Hex Hd – M8 x 30 5420-7...

37 A label kit, part number 78-8113-6932-7 is available as a stock item. It contains all the safety and informationlabels used on the coder conveyor, or labels can be ordered separately from the following list. Ref. No. 3M Part No. Description Qty. 1 78-8062-4266-1 Label – Product 2 2 78-8070-1329-3...