3M 034-3-TNG - Manuals - manualsarea.com

Page 2 - Intended Use; linearly to 50% relative humidity at 40oC

2 Read, understand and follow all safety information contained in these user guide instructions prior to installation of the 3M ™ EM Aware TNG ESD Event Monitor. Retain these instructions for future reference. Intended Use The 3M EM Aware TNG ESD Event Monitor monitors up to four key parameters that...

Page 3 - Safety Statements; result in death or serious injury:; not avoided, could result in death or serious injury,; EXPLANATION OF SIGNAL WORD CONSEQUENCES; could result in death or serious injury and/or property damage.; EXPLANATION OF PRODUCT SAFETY LABEL SYMBOLS; Earth Ground

3 3M ™ EM Aware TNG ESD Event Monitor Safety Statements WARNING: To reduce the risks associated with hazardous voltage, which if not avoided, could result in death or serious injury: • Do not modify or disassemble this product; • Never allow children or other non-qualified persons to come into conta...

Page 4 - not avoided, could result in damage to the meter:; TO EM AWARE TNG AND HARM TO PERSONNEL AND EQUIPMENT:; FCC; To reduce the risks associated with ground water contamination:

4 NOTICE: To reduce the risks associated with Electrostatic Discharge (ESD) voltage, which if not avoided, could result in damage to the meter: • To install or change antennas, turn off the meter, install or change antennas, turn meter back on; • Avoid touching antenna when meter is turned on. FAILU...

Page 5 - Box Contents; Check that the following items are included with the 3M; Installation and Mounting Instructions (Optional); Connect the EM Aware TNG monitor shown in Figure 1 below.

5 Box Contents Check that the following items are included with the 3M ™ EM Aware TNG ESD Event Monitor Starter Kit shipping box: A. EM Aware TNG moduleB. Remote antenna with cableC. Power adapterD. Container with metal screws Installation and Mounting Instructions (Optional) The 3M EM Aware TNG ESD...

Page 7 - Changing the ESD Event Parameters; appears. A “MEM” symbol appears momentarily in this process.; Application note: Measuring ESD Events

7 Changing the ESD Event Parameters 1. To reset the ESD counter to zero, press the joystick momentarily.2. To change the ESD threshold, press the joystick longer until “ESD” is displayed. Move the joystick left or right to decrease or increase the threshold value. On this screen, a “REF” symbol appe...

Page 8 - Changing the Static Voltage Parameters; static voltage screen.; Application note: Measuring/Detecting Static Voltage

8 Changing the Static Voltage Parameters 1. At the main screen display (no “REF” symbol), move the joystick until the display is as shown above. 2. To reset the over-threshold counter to zero, press the joystick momentarily.3. To change the voltage range and thresholds, push the joystick longer unti...

Page 9 - Changing the Ionization Balance and Decay Parameters; is as shown similar above.; Application note: Measuring Charge Decay

9 Changing the Ionization Balance and Decay Parameters 1. At the main screen display (no “REF” symbol), move the joystick until the display is as shown similar above. 2. To manually test the decay time, press the joystick momentarily. 3. The decay time is also automatically measured every three minu...

Page 10 - This symbol, per Marking for the Control of Pollution; product or part; does; contain a substance, as detailed in the chart below, in excess

10 3M ™ EM Aware TNG ESD Event Monitor Regulatory InformationChina RoHS Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for Certain Hazardous Substances in Electronic Information Products. This symbol, per Marking for the Control ...

Page 11 - 部件名称

11 产品中有毒有害物质或元素的名称及含量 Name and Content of Hazardous Substances or Elements 部件名称 (Part or Component Name) 有毒有害物质或元素 (Hazardous Substances or Elements) 铅 (Pb) 汞 (Hg) 镉 (Cd) 六价铬 Cr(VI) 多溴联苯 (PBB) 多溴二苯醚 (PBDE) 装置的焊接部 (Solder in instrument) × ○ ○ ○ ○ ○ ○：表示该有毒有害物质在该部件所有均质材料中的含量均在 SJ/T11363-2006 标准规定的限...