Page 2 - INFORMATION TO THE USER; TO THE OWNER
2 INFORMATION TO THE USER NOTE : This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection againstharmful interference when the equipment is operated in a commercial en...
Page 3 - IMPORTANT SAFETY INSTRUCTIONS
3 IMPORTANT SAFETY INSTRUCTIONS All the safety and operating instructions should be read beforethe product is operated. Read all of the instructions given here and retain them forlater use. Unplug this projector from AC power supply beforecleaning. Do not use liquid or aerosol cleaners. Use a dampcl...
Page 4 - TABLE OF CONTENTS
4 TABLE OF CONTENTS FEATURES AND DESIGN 5 BEFORE OPERATION 16 COMPUTER MODE 24 VIDEO MODE 30 SETTING 32 APPENDIX 33 PREPARATION 6 NAME OF EACH PART OF THE PROJECTOR 6 SETTING-UP THE PROJECTOR 7 POSITIONING THE PROJECTOR 8 ADJUSTABLE FEET 8 CONNECTING THE AC POWER CORD 8 VENTILATION 8 MOVING THE PROJ...
Page 5 - FEATURES AND DESIGN
5 FEATURES AND DESIGN This Multimedia Projector is designed with most advance technology for portability, durability, and ease for use.The projector utilizes built-in multimedia features, a palette of 16.77 million colors, and matrix liquid crystaldisplay (LCD) technology. ◆ Compatibility This proje...
Page 6 - PREPARATION; NAME OF EACH PART OF THE PROJECTOR; BOTTOM OF THE CABINET
6 PREPARATION NAME OF EACH PART OF THE PROJECTOR T h i s A i r I n t a k e V e n tshould not be blocked. BOTTOM OF THE CABINET BACK OF THE CABINET CARRY HANDLE HOT AIR EXHAUSTED ! Air blown from the exhaust vent ish o t . W h e n u s i n g o r i n s t a l l i n g t h ep r o j e c t o r , t h e f o l...
Page 7 - SETTING-UP THE PROJECTOR; POSITIONING THE PROJECTOR; ROOM LIGHT; ADJUSTABLE FEET
7 PREPARATION SETTING-UP THE PROJECTOR POSITIONING THE PROJECTOR ROOM LIGHT The brightness in the room has a great influence on the picture quality. It is recommended to limit ambientlighting in order to provide the best image. ADJUSTABLE FEET Picture tilt and projection angle can be adjusted bytwis...
Page 8 - VENTILATION; CAUTION; CONNECTING THE AC POWER CORD
8 PREPARATION ● Do not cover the vent slot. ● Keep the rear grill at least 3 feet (1m) away from anyobject. ● K e e p t h e b o t t o m c l e a r o f a n y o b s t r u c t i o n .Obstructions may block cooling air. This projector is equipped with the cooling fans for protection from overheating. Pay...
Page 9 - CAUTION WHEN CARRYING OR TRANSPORTING THE PROJECTOR.
9 PREPARATION MOVING THE PROJECTOR Use the Carry Handle when moving the Projector. ● When moving the projector, replace the lens coverand retract feet to prevent damage to the lens andcabinet. NOTE The carrying bag (supplied) is intended for protectionfrom dust and scratches on the surface of the ca...
Page 10 - CONNECTING THE PROJECTOR; TERMINALS OF THE PROJECTOR
▼ COMPUTER IN MONITOR OUT CONTROL PORT AUDIO IN SERIAL AUDIO OUT (MONO) VIDEO R–AUDIO–L S-VIDEO 10 CONNECTING THE PROJECTOR TERMINALS OF THE PROJECTOR Connect the computer outputto this terminal. (Refer to P12 ~15.) When controlling the computerwith the Remote Control of thisprojector, connect the m...
Page 11 - CONNECTING TO THE VIDEO EQUIPMENT
11 CONNECTING THE PROJECTOR ▼ COMPUTER IN MONITOR OUT CONTROL PORT AUDIO IN SERIAL AUDIO OUT (MONO) VIDEO R-AUDIO-L S-VIDEO CONNECTING TO THE VIDEO EQUIPMENT Satellite TV Turner Video Cassette Recorder Video Disc Player Video Audio Cable ✽ S-VIDEO Cable ✽ Audio Amplifier Audio Speaker(stereo) Extern...
Page 12 - CONNECTING TO THE IBM-COMPATIBLE COMPUTER
12 CONNECTING THE PROJECTOR CONNECTING TO THE IBM-COMPATIBLE COMPUTER To connect to the IBM-compatible computer, refer to the figure below. IBM-COMPATIBLE COMPUTERS (VGA / SVGA / XGA / SXGA) VGA Cable (supplied) Monitor Output Desktop type Laptop type Monitor Audio Speaker (stereo) Audio Amplifier S...
Page 14 - CONNECTION TO THE MACINTOSH COMPUTER
14 CONNECTING THE PROJECTOR ON 1 2 3 4 5 6 DIP CONNECTION TO THE MACINTOSH COMPUTER To connect to the Macintosh computer, refer to the figure below. MACINTOSH COMPUTERS (VGA / SVGA / XGA / SXGA) VGA Cable Monitor Output Desktop type Laptop type Monitor Audio Speaker (stereo) Audio Amplifier Control ...
Page 16 - BEFORE OPERATION; OPERATION OF THE REMOTE CONTROL
16 BEFORE OPERATION OPERATION OF THE REMOTE CONTROL This remote control unit is not only able to operate the projector but can also be used as a wireless mouse for aPC. POINT button and two CLICK buttons are used for wireless mouse operation. (Refer to page 33.)Wireless mouse is usable when PC mouse...
Page 17 - FRONT
17 BEFORE OPERATION Remote Control Batteries Installation 1 2 3 Slide the lidupward. Press the liddownward andslide it. For correct polarity (+ and –), be surethe battery terminals are in contactwith the pins in the compartment. R e m o v e t h e b a t t e r ycompartment lid. Slide the batteries int...
Page 18 - TOP CONTROLS AND INDICATORS
18 BEFORE OPERATION TOP CONTROLS AND INDICATORS LAMP REPLACE LAMP WARNING TEMP. READY MODE AUTO IMAGE NORMAL MENU VOLUME SELECT FOCUS ZOOM ON-OFF Used to select zoom adjust.(Refer to P22.) U s e d t o o p e n o r c l o s e t h eMENU operation.(Refer to P19.) MENU BUTTON MODE BUTTON AUTO IMAGE BUTTON...
Page 19 - OPERATING ON-SCREEN MENU
19 BEFORE OPERATION HOW TO OPERATE ON-SCREEN MENU FLOW OF ON-SCREEN MENU Display ON-SCREEN MENU Press MENU button to display the ON-SCREEN MENU (MENUBAR). The red frame is the POINTER. Select the ITEM by pressing SELECT button. The dialog box ofthe ITEM appears. Move the POINTER (red frame) to the I...
Page 20 - MENU BAR IN COMPUTER MODE
20 BEFORE OPERATION MENU BAR SYSTEM MENU Used to select acomputersystem.(Refer to P24) IMAGE MENU Used to adjust thecomputer image. [Finesync. / Total dots /White Balance /Contrast / Brightness](Refer to P27) PC ADJUST MENU Used to adjust theparameters tomatch with the inputsignal format.(Refer to P...
Page 21 - BASIC OPERATION; Turning on the Projector; TURNING ON / OFF THE PROJECTOR
21 BASIC OPERATION Turning on the Projector Connect the projector's AC power cord into a wall outlet. TheLAMP POWER indicator lights RED, and the READY indicatorlights GREEN. Press the power ON-OFF button on the Remote Control Unit or onthe Top Control to ON. The LAMP POWER indicator dims, andthe Co...
Page 22 - ADJUSTING THE PICTURE; ZOOM Adjustment; FOCUS Adjustment; NO SHOW FUNCTION
22 BASIC OPERATION ADJUSTING THE PICTURE ZOOM Adjustment 1 Press ZOOM / button on the Remote Control Unit or ZOOM ▲ / ▼ button on the Top Control to turn on the ZOOM mode. 2 Press ZOOM or ▲ button to make the image larger, and press ZOOM or ▼ button to make the image smaller. Zoom The message disapp...
Page 23 - SOUND ADJUSTMENT; Direct Operation
23 Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT buttons to select SOUND and press the SELECT button. Another dialog box SOUND ADJUSTMenu will appear. BASIC OPERATION Sound Volume Adjustment Press the VOLUME (+/–) buttons (located on the Top Control or on theRe...
Page 24 - COMPUTER MODE; SELECTING COMPUTER MODE; SELECTING COMPUTER SYSTEM; Automatic Multiscanning system; Selecting Computer System Manually
24 Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT buttons to select Computer and press the SELECT button. COMPUTER MODE SELECTING COMPUTER MODE Direct Operation Select Computer mode by pressing the MODE button on the TopControl or the Remote Control Unit. Menu O...
Page 25 - PC ADJUSTMENT
25 COMPUTER MODE PC ADJUSTMENT This Projector can automatically detect display signals from most personal computers currently distributed.However, some computers employ special signal formats which are different from the standard ones and maynot be detected by this projector. If this happens, the pr...
Page 26 - COMPATIBLE COMPUTER SPECIFICATIONS
26 COMPUTER MODE COMPATIBLE COMPUTER SPECIFICATIONS Basically this projector can accept the signal from all computers with the V, H-Frequency mentioned below andless than 165 MHz of Dot Clock. NOTE : Specifications are subject to change without notice. ON-SCREEN DISPLAY RESOLUTION H-Freq. (kHz) V-Fr...
Page 27 - PICTURE IMAGE ADJUSTMENT; Adjust Picture Image Manually
27 COMPUTER MODE PICTURE IMAGE ADJUSTMENT Press the MENU button and the ON-SCREEN MENU will appear.Press the POINT LEFT/RIGHT buttons to select IMAGE and press the SELECT button. Another dialog box PICTURE IMAGEADJUSTMENT Menu will appear. Press the POINT DOWN button and a red-arrow icon will appear...
Page 28 - Auto Image Function
28 COMPUTER MODE The Auto Image function is provided to automatically adjust Fine sync.,Total dots, and Picture Position for most computers. Press the MENU button and the ON-SCREEN MENU will appear.Press the POINT LEFT/RIGHT buttons to select AUTO IMAGE and press the SELECT button. Another dialog bo...
Page 29 - PICTURE POSITION ADJUSTMENT
29 COMPUTER MODE PICTURE POSITION ADJUSTMENT T h e p o s i t i o n o f t h e i m a g e c a n b e a d j u s t e d v e r t i c a l l y a n d h o r i z o n t a l l y t h r o u g h P I C T U R E P O S I T I O NADJUSTMENT. Press the MENU button and the ON-SCREEN MENU will appear.Press the POINT LEFT/RIGH...
Page 30 - VIDEO MODE; SELECTING VIDEO MODE; SELECTING COLOR SYSTEM; Auto
30 VIDEO MODE Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT buttons to select Video and press the SELECT button. SELECTING VIDEO MODE Direct Operation Select VIDEO mode by pressing the MODE button on the Top Controlor the Remote Control Unit. Menu Operation SEL...
Page 31 - Adjusting the Picture Image; PICTURE SCREEN ADJUSTMENT
31 VIDEO MODE PICTURE IMAGE ADJUSTMENT Press the MENU button and the ON-SCREEN MENU will appear.Press the POINT LEFT/RIGHT buttons to select IMAGE and press the SELECT button. Another dialog box PICTURE IMAGEADJUSTMENT Menu will appear. Press the POINT DOWN button and a red-arrow icon will appear.Mo...
Page 32 - SETTING; SETTING MENU
32 SETTING SETTING MENU Press the MENU button and the ON-SCREEN MENU will appear.P r e s s t h e P O I N T L E F T / R I G H T b u t t o n s t o s e l e c t S E T T I N G and press the SELECT button. Another dialog box SETTING Menu will appear. Press the POINT DOWN button and a red-arrow icon will a...
Page 33 - APPENDIX; OPERATING WIRELESS MOUSE; Installation
33 APPENDIX OPERATING WIRELESS MOUSE Installation The Wireless Remote Control Unit is not only able to operate the projector but also can be used as a wirelessmouse for a PC. POINT buttons and two CLICK buttons are used for wireless mouse operation.Wireless mouse is available only when PC mouse poin...
Page 34 - CLEANING THE PROJECTION LENS; MAINTENANCE; TEMPERATURE WARNING INDICATOR
34 CLEANING THE PROJECTION LENS Apply a non-abrasive camera lens cleaner to a soft, dry cleaning cloth. Avoid using an excessive amount of cleaner.Abrasive cleaners, solvents or other harsh chemicals might scratch the lens. When you are not using the projector, replace the lens cover. 1 3 Lightly wi...
Page 35 - ORDER REPLACEMENT LAMP
35 APPENDIX LAMP REPLACEMENT Indicator When the Lamp of this projector draws to an end, the LAMP REPLACEMENT indicator lights yellow. When theimage become dark or the color of the image becomes unnatural, replacement of the Lamp is required. Turn off the projector and disconnect the AC plug. Allow t...
Page 36 - TROUBLESHOOTING; Try these Solution
36 APPENDIX TROUBLESHOOTING Before calling your dealer or service station for assistance, check the matters below once again. 1. Make sure you have connected the projector to your equipment a s described in the section "CONNECTING THE PROJECTOR" on pages 10 ~ 15. 2. Check cable connection. V...
Page 38 - TECHNICAL SPECIFICATIONS
38 0.9" TFT Active Matrix type, 3 panels TECHNICAL SPECIFICATIONS Multi-media Projector 9.26 lbs (4.2 kg) 8.46" x 4.29" x 12.85" (215mm x 109mm x 326.5mm) 1024 x 768 dots 2,359,296 (1024 x 768 x 3 panels) PAL, SECAM, NTSC, NTSC4.43 and PAL-M H-sync. 15 ~ 100 KHz, V-sync. 50 ~ 100 Hz ...
Page 39 - OPTIONAL PARTS
39 OPTIONAL PARTS The parts listed below are optionally supplied. When ordering those parts, give thename and the Type No. of it to the sales dealer. ● Control Cable for Serial Port Type No. : POA-MC12SRL ● Control Cable for ADB Port Type No. : POA-MC12MAC ● MAC Adapter Type No. : POA-MACAP
