Bosch SPS60M08AU - User Manual

Safety instructions aus 5 Delivery 1. Check the packaging and dishwasher immediately for damage caused in transit. Do not switch on a damaged appliance, but contact your supplier. 2. Please dispose of the packaging material in an environmentally friendly manner. 3. Do not let children play with pack...

aus Safety instructions 6 If you cannot obtain any information from the manufacturer, you must not install the dishwasher above or below these appliances.If you install a microwave oven above the dishwasher, the microwave oven may be damaged.Install built-under or integratable appliances only under ...

Safety instructions aus 7 Deactivating the button lock: Hold down the button + for approx. 4 sec. until the display ’– goes out. When the programme ends ( ‹ : ‹‹ on the digital display), the button lock is cancelled. If there is a power failure, the button lock is retained. Whenever a programme is r...

aus Safety instructions 8 m Warning Risk of scalding! Open the door carefully when the programme is still running. There is a risk of hot water spraying out of the appliance. m Warning Risks to children! If fitted, use the childproof lock. An exact description can be found in the back of the envelop...

Protection of the environment aus 9 7 Protection of the environment P r o t e c t i o n o f t h e e n v i r o n m e n t Both the packaging of new appliances and the old appliances themselves contain valuable raw materials and recyclable materials.Please dispose of the individual parts separated acco...

aus Rinse aid 10 Overview of menu The settings can be found in the individual chapters. , Rinse aid R i n s e a i d As soon as the rinse-aid refill indicator ` is lit on the fascia, there is still a rinse-aid reserve of 1-2 rinsing processes. Refill with rinse aid.The rinse aid is required for stain...

Utensils aus 11 To change the setting:1. Press programme button 3 . Each time the button is pressed, the set value increases by one level; when the value of § : ‹‡ has been reached, the display jumps back to § : ‹‹ (off). 2. Press START button P . The set value is saved. Switching off rinse aid refi...

aus Utensils 12 Unloading the dishwasher To prevent water from dripping off the upper basket onto the utensils in the lower basket, it is recommended to empty the appliance from the bottom up.Hot utensils are sensitive to shock! Therefore, when the programme ends, leave the utensils to cool down in ...

Utensils aus 13 Cutlery basket You should always place cutlery unsorted with the points downwards. To prevent injuries, place long, pointed implements and knives on the knife shelf. Folding spikes Folding spikes * * depending on modelThe spikes can be folded down to improve arrangement of pans, bowl...

aus Utensils 14 Adjusting the height of the basket Adjusting the height of the basket * * depending on modelIf required, the height of the upper utensils basket 1" can be adjusted to provide more space for tall utensils either in the upper or lower basket. Appliance height 81.5 cm Select one of ...

Detergent aus 15 . Detergent D e t e r g e n t You can use tablets as well as powder or liquid detergents for dishwashers, but never use washing up liquid. The dosage can be individually adjusted with powder or a liquid detergent according to the degree of soiling. Tablets contain an adequately larg...

Overview of programmes aus 17 / Overview of programmes O v e r v i e w o f p r o g r a m m e s The max. possible number of programmes is illustrated in this overview. The corresponding programmes for your appliance can be found on the fascia. The programme data has been measured in the laboratory ac...

aus Overview of programmes 18 Programme selection You can select a suitable programme according to the type of utensils and degree of soiling. Information for test institutes Test institutes can request the conditions for running comparison tests by sending an e-mail to [email protected]. Quote the ...

Additional options aus 19 0 Additional options A d d i t i o n a l o p t i o n s * depending on modelAdditional options can be set with the buttons H . Express Wash/ Speed Perfect (VarioSpeed) Ÿ Express Wash/ Speed Perfect/ (VarioSpeed) * This function can reduce the running time by approx. 20% to 5...

aus Operating the appliance 20 1 Operating the appliance O p e r a t i n g t h e a p p l i a n c e Aqua sensor Aqua sensor * * depending on modelThe Aqua sensor is an optical measuring device (light barrier) which measures the turbidity of the rinsing water.The Aqua sensor is used according to the p...

Operating the appliance aus 21 End of programme The programme has ended when the value ‹ : ‹‹ is indicated on the numerical display h . Switching off automatically after the end of the programme * Switching off automatically after the end of the programme * depending on modelTo save energy, the dish...

aus Cleaning and maintenance 22 Changing the programme When the START button P has been pressed, the programme cannot be changed.The only way a programme can be changed is by Cancel programme (Reset). Intensive drying The final rinse uses a higher temperature which improves the drying result. The ru...

Cleaning and maintenance aus 23 m Warning – Health hazard Never use other domestic detergents, e.g. containing chlorine! Rinse aid Check the refill indicator ` . If required, refill rinse aid. Filters The filters 1J keep large foreign objects in the rinsing water away from the pump. These foreign ob...

aus Fault, what to do? 24 Spray arms Limescale and contaminants in the rinsing water may block nozzles and bearings on the spray arms 1: and 1B . 1. Check outlet nozzles on the spray arms for blockages. 2. Unscrew the upper spray arms 1: (1/4 revolution). 3. Remove the lower spray arm 1B upwards. 4....

Fault, what to do? aus 25 Waste water pump Large food remnants or foreign objects which were not captured by the filters may block the waste water pump. The rinsing water will then be above the filter. m Warning – Risk of cuts! When cleaning the waste water pump, ensure that you do not injure yourse...

aus Fault, what to do? 26 Fault table Fault Cause Remedial action “Check water supply” display X lights up. Supply hose kinked. Install supply hose without kinks. Tap turned off. Turn on the tap. Tap jammed or calcified. Turn on the tap.Flow rate must be min. 10 l/min. when water supply is open. Fil...

Customer service aus 33 4 Customer service C u s t o m e r s e r v i c e If you are unable to rectify the fault, please contact your customer service. We always find a suitable solution, even to avoid unnecessary visits by technicians. Contact information for your nearest customer service can be fou...

aus Installation and connection 34 Delivery Your dishwasher has been checked thoroughly in the factory to ensure that it is in working order. This may cause small water stains. These will disappear after the first wash cycle. Technical specifications Weight: max. 45 kg Voltage: 220–240 V, 50 Hz or 6...

Installation and connection aus 35 Drinking water connection 1. Fasten the drinking water connection to the tap according to the installation instructions using the enclosed parts.Ensure that the drinking water connection is not kinked, crushed or twisted. 2. When replacing the appliance, always use...

aus Installation and connection 36 Removing the appliance Also observe the sequence of worksteps here. 1. Disconnect the appliance from the power supply. 2. Turn off the water supply. 3. Undo the waste water and drinking water connection. 4. Loosen fastening screws for the furniture parts. 5. If fit...

&KLOGSURRIORFNGRRUORFN $FWLYDWHWKHFKLOGSURRIORFN 2SHQWKHGRRUZLWKDFWLYDWHG FKLOGSURRIORFN 'HDFWLYDWHFKLOGSURRIORFN $OZD\VFORVHWKHDSSOLDQFHGRRUFRPSOHWHO\ ZKHQ\RXOHDYHWKHDSSOLDQFH 7KLVLVWKHRQO\ZD\\RXFDQSURWHFW\RXU FKLOGUHQIURPSRWHQWLDOGDQJHUV :DUQLQJ %DNLQJVKHHWVSUD\KHDG /DUJHVKHHWVRUJULOOHVDQGSODW...