Bosch SMS50M28AU - User Manual

Safety instructions aus 5 Delivery 1. Check the packaging and dishwasher immediately for damage caused in transit. Do not switch on a damaged appliance, but contact your supplier. 2. Please dispose of the packaging material in an environmentally friendly manner. 3. Do not let children play with pack...

aus Safety instructions 6 If you cannot obtain any information from the manufacturer, you must not install the dishwasher above or below these appliances.If you install a microwave oven above the dishwasher, the microwave oven may be damaged.Install built-under or integratable appliances only under ...

Safety instructions aus 7 Deactivating the button lock: Hold down the button + for approx. 4 sec. until the display ’– goes out. When the programme ends ( ‹ : ‹‹ on the digital display), the button lock is cancelled. If there is a power failure, the button lock is retained. Whenever a programme is r...

aus Safety instructions 8 m Warning Risk of scalding! Open the door carefully when the programme is still running. There is a risk of hot water spraying out of the appliance. m Warning Risks to children! If fitted, use the childproof lock. An exact description can be found in the back of the envelop...

Protection of the environment aus 9 7 Protection of the environment P r o t e c t i o n o f t h e e n v i r o n m e n t Both the packaging of new appliances and the old appliances themselves contain valuable raw materials and recyclable materials.Please dispose of the individual parts separated acco...

aus Rinse aid 10 Overview of menu The settings can be found in the individual chapters. * depending on model , Rinse aid R i n s e a i d As soon as the rinse-aid refill indicator ` is lit on the fascia, there is still a rinse-aid reserve of 1-2 rinsing processes. Refill with rinse aid.The rinse aid ...

Utensils aus 11 3. Close cover until it clicks shut. 4. To prevent excessive foam formation during the next rinse cycle, remove any rinse aid which has run over with a cloth. Setting amount of rinse aid The amount of rinse aid can be set from § : ‹‹ to § : ‹‡ . Please set rinse aid on § : ‹† to obta...

aus Utensils 12 Glass and utensil damage Causes: Glass type and glass production process.Chemical composition of the detergent.Water temperature of the wash programme. Recommendation: Use only glasses and porcelain which the manufacturer designates as dishwasher-proof.Use a detergent which protects ...

Utensils aus 13 Note Utensils must not be placed above the tablet collecting tray 12 . These may block the lid of the detergent dispenser and prevent it from opening fully. Pans Bottom basket 1Z Tip Heavily soiled utensils (pans) should be placed in the bottom basket. The more powerful spray jet pro...

aus Utensils 14 Etagere Etagere * The etagere and the space underneath can be used for small cups and glasses or for larger items of cutlery, such as wooden spoons or serving cutlery. The etagere can be folded up if not required. * Depending on the model, a 3-fold height adjustment is possible. To d...

Utensils aus 15 Adjusting the height of the basket Adjusting the height of the basket * * depending on modelIf required, the height of the upper utensils basket 1" can be adjusted to provide more space for tall utensils either in the upper or lower basket. Appliance height 81.5 cm Appliance heig...

aus Detergent 16 . Detergent D e t e r g e n t You can use tablets as well as powder or liquid detergents for dishwashers, but never use washing up liquid. The dosage can be individually adjusted with powder or a liquid detergent according to the degree of soiling. Tablets contain an adequately larg...

aus Overview of programmes 18 / Overview of programmes O v e r v i e w o f p r o g r a m m e s The max. possible number of programmes is illustrated in this overview. The corresponding programmes for your appliance can be found on the fascia. The programme data has been measured in the laboratory ac...

Additional options aus 19 Programme selection You can select a suitable programme according to the type of utensils and degree of soiling. Information for test institutes Test institutes can request the conditions for running comparison tests by sending an e-mail to [email protected]. Quote the appl...

aus Operating the appliance 20 Ï Intensive zone * Intensive zone Perfect for a mixed load. You can wash very soiled pots and pans in the lower basket together with normally soiled utensils in the upper basket. The spray pressure in the lower basket is intensified, the rinsing temperature is increase...

Operating the appliance aus 21 Remaining running time display When the programme is selected, the remaining running time of the programme is indicated on the digital display h . The running time is determined during the programme by the water temperature, the number of utensils as well as the degree...

aus Operating the appliance 22 Switching off the appliance Short time after the end of the programme: 1. Switch off ON/OFF switch ( . 2. Turn off the tap (not applicable if Aqua-Stop fitted). 3. Open the door. 4. Remove the utensils when they have cooled down. Note When the programme ends, leave the...

Cleaning and maintenance aus 23 2 Cleaning and maintenance C l e a n i n g a n d m a i n t e n a n c e A regular inspection and maintenance of your machine will help to prevent faults. This saves time and prevents problems. Overall condition of the machine Check spray arm for grease and limescale de...

aus Cleaning and maintenance 24 Filters The filters 1J keep large foreign objects in the rinsing water away from the pump. These foreign objects may occasionally block the filters.The filter system consists of a coarse filter, a flat fine filter and a microfilter. 1. After each washing cycle check t...

Fault, what to do? aus 25 3 Fault, what to do? F a u l t , w h a t t o d o ? Experience has shown that you can rectify most faults which occur in daily operation yourself. This ensures that the machine is quickly available to you again. In the following overview you can find possible causes of malfu...

aus Fault, what to do? 26 Fault table Fault Cause Remedial action “Check water supply” display X lights up. Supply hose kinked. Install supply hose without kinks. Tap turned off. Turn on the tap. Tap jammed or calcified. Turn on the tap.Flow rate must be min. 10 l/min. when water supply is open. Fil...

Customer service aus 33 4 Customer service C u s t o m e r s e r v i c e If you are unable to rectify the fault, please contact your customer service. We always find a suitable solution, even to avoid unnecessary visits by technicians. Contact information for your nearest customer service can be fou...

aus Installation and connection 34 Safety instructions Please follow the safety instructions under “Installation”. Delivery Your dishwasher has been checked thoroughly in the factory to ensure that it is in working order. This may cause small water stains. These will disappear after the first wash c...

Installation and connection aus 35 Drinking water connection 1. Fasten the drinking water connection to the tap according to the installation instructions using the enclosed parts.Ensure that the drinking water connection is not kinked, crushed or twisted. 2. When replacing the appliance, always use...

aus Installation and connection 36 Electrical connection Connect the appliance to an alternating current only, ranging from 220 V to 240 V and 50 Hz or 60 Hz via a correctly installed socket with protective earth conductor. See rating plate for required fusing 9* . The socket must be near the applia...

&KLOGSURRIORFNGRRUORFN $FWLYDWHWKHFKLOGSURRIORFN 2SHQWKHGRRUZLWKDFWLYDWHG FKLOGSURRIORFN 'HDFWLYDWHFKLOGSURRIORFN $OZD\VFORVHWKHDSSOLDQFHGRRUFRPSOHWHO\ ZKHQ\RXOHDYHWKHDSSOLDQFH 7KLVLVWKHRQO\ZD\\RXFDQSURWHFW\RXU FKLOGUHQIURPSRWHQWLDOGDQJHUV :DUQLQJ %DNLQJVKHHWVSUD\KHDG /DUJHVKHHWVRUJULOOHVDQGSODW...