Bock Water Heaters 72E - Manual

Bock Water Heaters 72E

Bock Water Heaters 72E – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
Page: / 8

Table of Contents:

  • Page 2 – Leave ample room for servicing when the water heater is in-; The recommended; SIZES AND CAPACITIES; BURNER SPECIFICATIONS; NOZZLE
  • Page 3 – VENTILATION AIR
  • Page 4 – PUTTING HEATER; Install a water soft-; FIGURE 1; CONNECT TO; FIGURE 2
  • Page 7 – OIL-FIRED WATER HEATER; FIGURE 7
  • Page 8 – LIMITED WARRANTY; BURNER PARTS LIST; CAD CELL
Loading the manual

which could occasionally exceed 120oF. The variation in

outcoming temperature could be based on factors in-

cluding but not limited to usage patterns and type of

installation. Test your water at the tap nearest to the wa-

ter heater.
WARNING: Hotter water increases the risk of scald in-

jury. Before changing the temperature setting, read the

instruction manual. Temperatures at which injury occurs

vary with the individual’s age and length of exposure.
The slower reaction times of children, elderly and phys-

ically or mentally impaired persons increases the

scalding hazard to them. It is recommended lower wa-

ter temperatures be used where these situations exist.
To lower water temperature use point-of-use tem-

perature limiting devices.
WARNING:
Flammable vapors may be drawn to this

water heater from other areas of the structure by air cur-

rents.

Do not store or use any flammable liquids in

the vicinity of this heater.
WARNING: Water heater blankets may restrict air flow

to the heater and cause fire, asphyxiation, personal in-

jury or death.
WARNING: Hydrogen gas can be produced in a hot

water system that has not been used for an extended

period–generally, two weeks or longer. To prevent pos-

sible injury under this situation, we recommend that a

hot water faucet be wide open for several minutes

before you use ANY electrical appliance that is connect-

ed to the hot water system. If hydrogen is present, an

unusual sound – such as air escaping – will come from

the open faucet as the hot water begins to flow.

Hydrogen gas is extremely flammable – there must

be no open flame near this open faucet.

TO THE INSTALLER:
Please attach these in-

structions next to the

water heater.
TO THE CONSUMER:
Read these and all

component instruc-

tions. Please keep for

future reference.

Waranty, registration card

& parts list included.

INSTALLATION, OPERATION

& MAINTENANCE INSTRUCTIONS

OIL-FIRED WATER HEATERS

72E • 73E • 190E • 241E • 361E • 541E

WARNING: Improper installation, adjustment, alteration,

service or maintenance can cause serious injury or

property damage. Refer to this manual. For assistance

or additional information, consult a qualified installer or

service agency.
WARNING: If the information in these instructions is not

followed exactly, fire or explosion may result and can

cause property damage, personal injury or death.

DO NOT INSTALL THE WATER HEATER ON COMBUSTI-

BLE FLOORING.

Install in accordance with all local

codes. In the absence of local codes, refer to NFPA 31

or ANSI Z21.10.1,

or contact Bock Water Heaters with

questions concerning proper flooring materials.

Minimum clearance to combustible construction is:

SIDES 6"; BACK 6"; FRONT 24". The installation of this

water heater must conform with local codes and ordi-

nances. In the absence of local codes, the installation

must comply with the National Fire Protection Associa-

tion (NFPA 31) Code.

WARNING: The recommended temperature for normal

residential use is 120

o

F. The dial on the aquastat does

not always reflect the outcoming water temperature,

Bock Water Heaters, Inc.

110 S. Dickinson St. • P.O. Box 8632 • Madison, WI 53708-8632

Phone: 608/257-2225 • Fax: 608/257-5304 • www.bockwaterheaters.com

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 2 - Leave ample room for servicing when the water heater is in-; The recommended; SIZES AND CAPACITIES; BURNER SPECIFICATIONS; NOZZLE

– 2 – PERFORMANCE SPECIFICATIONS AND ROUGHING-IN DIMENSIONS Leave ample room for servicing when the water heater is in- stalled – do not block access to the burner, inspection door, handholes or controls. Leave room to pipe the unit and connect the fuel and electricity. CAUTION: The recommended wate...

Page 3 - VENTILATION AIR

– 3 – Care must be taken to insure an adequate air supply for the water heater. A. Install equipment only where the water heater will have satisfactory combustion, proper venting, and the maintenance of temperature at safe limits all around the unit under normal operating con- ditions. Free circulat...

Page 4 - PUTTING HEATER; Install a water soft-; FIGURE 1; CONNECT TO; FIGURE 2

– 4 – 2. Bock recommends a two-pipe (suction and return) system for these heaters. Use 1/2" O.D. soft cop- per tubing (5/8” O.D. soft copper on Sun Tec H pumps) and install a bypass plug on two-pipe system. (See instructions packed with pump.) Note: Do not install a bypass plug if using a gravit...

Other Bock Water Heaters Models

All Bock Water Heaters Other