Page 2 - DATE OF INSTALLATION:
Please take a few moments now to fill in the information below for your future reference. In the event you require parts or service, this information will be needed to ensure you receive the highest quality service we can provide. DATE OF PURCHASE: DEALER’S NAME: DEALER’S ADDRESS: DATE OF INSTALLATI...
Page 3 - Table of Contents; INSTALLATION INSTRUCTIONS:
Table of Contents INSTALLATION INSTRUCTIONS: 5 Handling and Unpacking 7 Installation of Ducting & Electrical Specifications 8 Removing Liner from Shell | Mounting Shell to W all 9 Installing In-Hood Blowers 10 Installing Remote Blowers 12 Installing In-Line Blowers 14 Installing W all Hood Duct ...
Page 4 - INSTALLATION INSTRUCTIONS
1. This appliance was designed for ease of installation and operation. However, we recommend that you read all sections of this manual before you begin installation. 2. Do not remove permanently affixed labels, warnings or data plates from your appliance. This may void the manufacturer’s warranty an...
Page 5 - To reduce the risk of cooking appliance grease fire:; store it in close proximity to your appliances.; Handling and Unpacking; accepted. Report any damage to your dealer immediately.
This product is for general residential ventilation applications. Do not use to exhaust hazardous, flammable or explosive materials. Clean baffle filters often since accumulated grease can be a fire hazard and effect the performance of your ventilation hood. Always turn on ventilation hood when oper...
Page 6 - HEIGHT FROM FLOOR
INSTALLATION INSTRUCTIONS Unpacking: • Check the package for damage. If any damage is visible you should mark the bill of lading you sign that there may be concealed damage. • Ensure the container is upright. If the container is not upright major damage can occur to your appliance. If damage is disc...
Page 7 - Installation of Ducting for Proper Operation:; Ventilation Hood Mounting Instructions:
Installation of Ducting for Proper Operation: IMPORTANT Proper installation of ducting is extremely important for optimal performance of your ventilation system. It is a basic requirement that the kitchen is provided with an air intake to ensure good air circulation and therefore proper operation of...
Page 8 - Step 3: Mount Outer Shell to Wall; This hood is designed to be plugged into a 3-prong Non-GFCI outlet
INSTALLATION INSTRUCTIONS Figure E: Remove Mounting Screws Remove screws in front and back of liner that attach it to the outer shell Figure F: Remove Liner from Shell Carefully slide liner out of outer shell. Remove all protective film from exterior of liner and baffle filters. To completely remove...
Page 9 - screws inside of liner.; Duct Connection Detail: 10”; Recommended Duct
Step 4-1: Installing In-hood 600 CFM Blowers Duct Connection Detail: 6” Round Recommended Duct Size: 6” | Minimum Duct Size: 6” Figure A: Attach Blower Unscrew blower plate and set to top or rear discharge. Screw blower to plate with included hardware Figure B: Connect Plate Internally Re-install al...
Page 10 - FLAT OR LOW SLOPE ROOF; For flat roofs or roofs having pitch less than 1 1⁄2” rise; Figure 1; rear flashing flange and a minimum of 12” of the
INSTALLATION INSTRUCTIONS Step 4-3. Installing Remote Blowers 10 MODEL NUMBER: HYEX-1.0/HY-EX-1.4 MAXIMUM CFM: 1000 CFM/1400 CFM VOLTS/HERTZ/AMPS: 115VAC, 60 Hz, 2.9A (HYEX-1.0) and 3.3A (HYEX-1.4) REQUIRED DUCT SIZE: HYEX- 1.0: 8” Round (51 sq. in. equiv.) / HYEX - 1.4: 10” Round (80 sq. in. equiv....
Page 11 - ELECTRICAL CONNECTIONS; Tape or use joint sealant on all joints.; Figure 3
INSTALLATION INSTRUCTIONS Step 4-3. Installing Remote Blowers 11 ELECTRICAL CONNECTIONS WARNING: TURN OFF POWER AT THE SERVICE BOX PRIOR TO WIRING BLOWER 1. Power supply for the blower s 115V AC, 60 Hz. See page 2 for specifications 2. Run electrical cable between the blower and the range hood or bl...
Page 13 - – 8” Round; Model; Step 5. Mount Outer Shell to Wall; Step 6. Re-install Liner into Outer Shell; Lift Liner into Shell; Carefully re-install liner to; Attach Liner to Shell; Re-install with hardware that; mounted liner to shell during; attaching panel to ventilation; Step 7. Connect Ducting to Ventilation Hood
INSTALLATION INSTRUCTIONS Step 4-4. Installing In-line Blowers Duct Detail: ATEX-0.8 – 8” Round ATEX-1.2 – 10” Round 13 Dimensions and Wiring: Model A C D E Weight ATEX-0.8 8 12 ½ 15 ½ 7 19 lbs ATEX-1.2 10 14 15 8 21 lbs Step 5. Mount Outer Shell to Wall 1. The bottom of the hood should be 30” minim...
Page 14 - INSTALLATION INSTRUCTIONS: 1-PIECE DUCT COVERS
INSTALLATION INSTRUCTIONS: 1-PIECE DUCT COVERS Step 8-1. Installing 1-Piece Duct Cover Option 1 1. Secure duct cover to top of hood using machine screws provided. 2. Mount complete unit to wall using instructions in Step 4 for Mounting Outer Shell to Wall. 3. Install blower plate into hood sealing c...
Page 15 - INSTALLATION INSTRUCTIONS: TELESCOPIC DUCT COVERS; Step 8.3 Installing Telescopic Duct Cover Option 1; Step 8-4. Installing Telescopic Duct Cover Option 2; Attach mounting bracket to wall 1/8” from ceiling and centered
15 INSTALLATION INSTRUCTIONS: TELESCOPIC DUCT COVERS Step 8.3 Installing Telescopic Duct Cover Option 1 1. Attach mounting bracket to wall 1/8” from ceiling and centered with hood. 2. Attach lower portion of duct cover to hood with hardware provided. 3. Slide upper portion into lower portion of duct...
Page 16 - Manhattan Style Wall Hoods; Anchor outer shell to wall and level.; Install duct work on duct cover.; Put duct cover in position and screw on transition.; Manhattan Hood & Duct Installation
INSTALLATION INSTRUCTIONS Manhattan Style Wall Hoods 1. Follow Step 2 of installation instructions on removing liner from outer shell. 2. Mount duct to ceiling using method below that best applies to your application. 3. Mount blower(s) into duct cover using hardware provided. 4. Anchor outer shell ...
Page 17 - Blower; Timer; Section 2: LED Lighting; Replacing LED Lights:
USE & CARE INSTRUCTIONS Section 1: Control Panel A B C D E F Blower Controls Light Controls Timer Blower Controls: A – Blower starts on 1 st speed B – 2 nd speed C – 3 rd speed D – 4 th speed (Boost Function)* After 7 minutes of operation in Boost Mode the blower will automatically move to 3 rd ...
Page 18 - USE & CARE INSTRUCTIONS; Your hood must be kept clean and maintained properly; Section 4: Cleaning Interior and Exterior
The function of the baffle filters is the absorption of grease particles that form during cooking. Do not operate ventilation hood without filters in hood. Baffle filters should be examined periodically to assure that the surfaces and parts are clean. IMPORTANT USE & CARE INSTRUCTIONS Section 3:...
Page 19 - Exterior Finish: Brushed Stainless Steel; the clear coat and the metals will start to age.
USE & CARE INSTRUCTIONS Make sure that the electrical power is off before cleaning. The recommended detergent is a solution of water and a neutral liquid soap. It is very important for the liquid soap to not contain granules that could scratch the surface. First apply the solution to a soft clot...