BlueStar PM046ML - User Manual
BlueStar PM046ML Range Hood – User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – DATE OF INSTALLATION:
- Page 3 – Table of Contents; INSTALLATION INSTRUCTIONS:; Models Starting with “MH”; USE AND CARE INSTRUCTIONS:
- Page 4 – Use this unit in the manner intended by the manufacturer.; INSTALLATION INSTRUCTIONS
- Page 5 – Do not use to exhaust hazardous, flammable or explosive materials.; appliance once it is out of its shipping container.
- Page 7 – Installation of Ducting for Proper Operation:; Electrical Specifications:; extend up to 36” from the top of the liner.; Depending on specific installation conditions,; removed at the liner’s junction box, and the hood may
- Page 8 – Step 3: Set liner aside and prepare for blower installation.; application. If no duct cover is being used proceed to Step 4.
- Page 10 – FLAT OR LOW SLOPE ROOF; Center the duct cutout between roof rafters; Figure 3; Tape or use joint sealant on all joints.
- Page 11 – Alternate Mounting Option; Remove the temporary hanger fixtures.; Mounting the Blower
- Page 12 – ELECTRICAL CONNECTIONS; Connect electrical cable from blower to the three-; Figure 4 Cable between Hood and Remote Blower; Range Hood; HYEX Blower; OR; Figure 5 ATEX Blower Connection
- Page 13 – The bottom of the hood should be 30” minimum to 36”; Step 5. Mount the Outer Hood Shell to the Wall
- Page 14 – Step 7. Connect Ducting to Ventilation Hood; Lift Liner into Shell; panel’s tabs into slots in front of
- Page 15 – INSTALLATION INSTRUCTIONS: DUCT COVERS; Installing a Telescopic Duct Cover; Drive remaining 2 screws into lower duct cover’s bracket.; Installing a 1-Piece Duct Cover
- Page 16 – Models starting with “MH”; liner’s junction box, and the hood may be direct wired to a; junction box
- Page 17 – Timer
- Page 18 – USE & CARE INSTRUCTIONS
- Page 19 – Cleaning the Interior; soapy water. Follow all label instructions.; Designer Metals (Polished Brass and Polished Copper); These Designer Metals are not
INSTALLATION and
USE & CARE
WALL HOODS
Models starting with: AT, BZ, HA, IN, ME, MH, NR, PL, PM, PY, SC, WR
197299 Rev 1
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Please take a few moments now to fill in the information below for your future reference in the event you require parts or service. DATE OF PURCHASE: DEALER’S NAME: DEALER’S ADDRESS: DATE OF INSTALLATION: INSTALLER’S NAME: INSTALLER’S ADDRESS: MODEL NUMBER: SERIAL NUMBER:
Table of Contents INSTALLATION INSTRUCTIONS: 5 Handling and Unpacking 7 Installation of Ducting & Electrical Specifications 8 Removing Liner from Hood Shell 9 Installing In-Hood Blowers 10 Installing Remote External Blowers 11 Installing Remote In-Line Blowers 12 Wiring Remote Blowers (HYEX or A...
1. This appliance was designed for ease of installation and operation. However, we recommend that you read all sections of this manual before you begin installation. 2. Do not remove permanently affixed labels, warnings or data plates from your appliance. This may void the manufacturer’s warranty an...
