Black & Decker PS400JRB - Manual
Black & Decker PS400JRB – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 3 – Make sure your extension cord is in good condition. When using; SAFETY GUIDELINES / DEFINITIONS; not avoided, may result in property damage.; RISK OF UNSAFE OPERATION.; When using tools or equipment, basic safety precautions should; SAVE THESE INSTRUCTIONS
- Page 4 – IMPORTANT SAFETY INSTRUCTIONS; • If an extension cord is used, make sure that:; WARNING: RISK OF EXPLOSIVE GASES; • NEVER ATTEMPT TO JUMP-START OR CHARGE A FROZEN BATTERY.
- Page 5 – FIRST AID
- Page 6 – WEATHER RADIO SAFETY INSTRUCTIONS
- Page 7 – INTRODUCTION
- Page 8 – Protective Features; Automatic Overload —; Built-in protection against overload — in the event the AC outlet; Ground Fault Circuit Interrupter (GFCI) —; The GFCI protects the unit and the user by; Overheating —; Unit automatically shuts down if it exceeds a safe temperature.; Power Switch and Reverse Polarity Alarm —; In event the cables/clamps are reversed; Low Battery —; If the battery power level is too low, the AC Power Supply shuts
- Page 9 – 2 Volt DC Charging; CAUTION: TO REDUCE THE RISK OF PROPERTY DAMAGE:
- Page 10 – vehicle in “park” and set the emergency brake.; DO NOT TURN POWER SWITCH ON IF REVERSE POLARITY ALARM SOUNDS OR THE; USING THE ALTERNATOR CHECK FEATURE; Turn the power switch to the off position.
- Page 11 – DC Power Supply Panel
- Page 12 – AC POWER SUPPLY CONTROLS AND INDICATORS; AC Power Supply Operation; USING THE EMERGENCY AREA LIGHT; AC Power Supply Front Panel
- Page 13 – CARE AND MAINTENANCE; Replacement Parts
- Page 14 – SERVICE INFORMATION
- Page 15 – FREE WARNING LABEL REPLACEMENT:; SPECIFICATIONS; 2 Volt DC Specifications
ELECTROMATE
®
INSTRUCTION MANUAL
Thank you for choosing Black & Decker!
Go to www.BlackandDecker.com/NewOwner
to register your new product
Catalog Number PS400JRB
BEFORE RETURNING THIS PRODUCT
FOR ANY REASON PLEASE CALL
1-800-544-6986
BEFORE YOU CALL, HAVE THE CATALOG No, AND DATE CODE
AVAILABLE. IN MOST CASES, A
BLACK & DECKER
REPRESENTATIVE
CAN RESOLVE THE PROBLEM OVER THE PHONE. IF YOU HAVE A
SUGGESTION OR COMMENT, GIVE US A CALL. YOUR FEEDBACK IS
VITAL TO BLACK & DECKER.
TO REDUCE THE RISK OF INJURY, THE USER MUST READ AND
UNDERSTAND THE INSTRUCTION MANUAL
SAVE THIS MANUAL FOR FUTURE REFERENCE.
Cat. # PS400JRB
Form # ITM90509558
SEPTEMBER ‘06
Copyright © 2006 Black & Decker
Printed in China
PS400JRB_Manual EN_090506 SE.qxp 9/6/06 3:38 PM Page i
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
• EXTENSION CORDS. Make sure your extension cord is in good condition. When using an extension cord, be sure to use one heavy enough to carry the current your product willdraw. An undersized cord will cause a drop in line voltage resulting in loss of power andoverheating. The following table shows t...
IMPORTANT SAFETY INSTRUCTIONS WARNING: This product or its power cord contains lead, a chemical known to the State of California to cause cancer and birth defect or other reproductive harm. Wash hands after handling. WARNING: BURST HAZARD: Do not use the unit for charging dry-cell batteries that are...
4 • Remove personal metal items such as rings, bracelets, necklaces and watches when working witha lead acid battery. A lead acid battery can produce a short circuit current high enough to weld aring, or the like of a metal, causing a severe burn.• Do not wear vinyl clothing when jump-starting a veh...
