Black & Decker BC25EB - Manual
Black & Decker BC25EB – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – READ ALL INSTRUCTIONS
- Page 3 – SAFETY GUIDELINES / DEFINITIONS; RISK OF UNSAFE OPERATION.; IMPORTANT SAFETY INSTRUCTIONS; WARNING: RISK OF EXPLOSIVE GASES
- Page 5 – INTRODUCTION; Thank you for selecting the
- Page 6 – Top-Off Charge voltage is; FEATURES; Charge Curve
- Page 7 – OPERATING INSTRUCTIONS; AC POWER INDICATOR -; indicate power is on. Disconnect charger after use.; FAULT CODES
- Page 8 – Instructions” section of this manual.; Charge Rate Selection; The default selection is “GEL” type battery.; Automatic Float Charging; returns to “FUL” when completed.; Equalizing
- Page 9 – Engine Start; The Engine Start function can supply 75 amps for engine starting.; Recondition Mode
- Page 10 – APPROXIMATE CHARGING TIMES; Battery Charger; TROUBLESHOOTING; F01 — Internal Shorted Cell Battery
- Page 11 – Alternator output voltage is out of typical operation range.; CARE AND MAINTENANCE; With proper care and minimal maintenance, the; SERVICE INFORMATION
- Page 12 – FULL FIVE-YEAR HOME USE WARRANTY; FREE WARNING LABEL REPLACEMENT:; If your warning labels become illegible or are missing, call 1-800-; SPECIFICATIONS
25 AMP SMART
™
FULLY AUTOMATIC BATTERY CHARGER
INSTRUCTION MANUAL
Thank you for choosing Black & Decker!
Go to www.BlackandDecker.com/NewOwner
to register your new product
Catalog Number BC25EB
BEFORE RETURNING THIS PRODUCT
FOR ANY REASON PLEASE CALL
1-800-544-6986
BEFORE YOU CALL, HAVE THE CATALOG No, AND DATE CODE
AVAILABLE. IN MOST CASES, A
BLACK & DECKER
REPRESENTATIVE
CAN RESOLVE THE PROBLEM OVER THE PHONE. IF YOU HAVE A
SUGGESTION OR COMMENT, GIVE US A CALL. YOUR FEEDBACK IS
VITAL TO BLACK & DECKER.
SAVE THIS MANUAL FOR FUTURE REFERENCE.
Cat. # BC25EB
Form # 90515449
December 2007
Copyright © 2007 Black & Decker
Printed in China
BC25EB_ManualEN_121007.qxp 12/10/2007 8:42 AM Page i
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
1 GENERAL SAFETY WARNINGS AND INSTRUCTIONS FOR ALL APPLIANCES READ ALL INSTRUCTIONS READ ALL INSTRUCTIONS WARNING: Read all instructions before operating product. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury.• AVOID DANGEROUS ENVIRONMENTS: ...
2 SAFETY GUIDELINES / DEFINITIONS DANGER: Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. WARNING: Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury. CAUTION: Indicates a potentially h...
4 DC Connection Precautions 1. Connect and disconnect DC output clamps only after removing AC cord from electric outlet.2. Never allow clamps to touch each other.3. Attach clamps to battery and chassis as indicated in “Battery Installed in Vehicle” steps 5 and 6, and in “Battery Outside of Vehicle” ...
