Black & Decker 62784- Manual

Page 2 - IMPORTANT SAFEGUARDS

When using your iron, basic safety precautions should always be followed, including the following: ■ Read all instructions. ■ Use iron only for its intended use. ■ To protect against a risk of electric shock, do not immerse the iron inwater or other liquid. ■ The iron should always be turned to Off ...

Page 3 - SPECIAL INSTRUCTIONS; POLARIZED PLUG; SAVE THESE INSTRUCTIONS

SPECIAL INSTRUCTIONS ■ To avoid a circuit overload, do not operate another high-wattage appli-ance on the same circuit. ■ If an extension cord is necessary, a 10-ampere rated cord with a polar-ized plug and Underwriters Laboratories listing should be used. Cordsrated for less amperage may overheat. ...

Page 5 - How To Use

IMPORTANT: Follow this procedure to clean the iron before first use and to become familiar with its features. 1. Remove any labels, stickers, or tags which may beattached to the body or soleplate of the iron. 2. Fill the Water Tank about 1/3 full with water (approx-imately 2 oz.). (See “Filling With...

Page 6 - FILLING WITH WATER; Never place the iron directly; Starting the Iron; Figure A; Figure B

FILLING WITH WATER 1. Ordinary tap water can generallybe used for ironing. However, do notuse water processed through ahome softening system. 2. In extremely hard water areas(over 180 parts per million) considerusing distilled or demineralizedwater. If using distilled or demineral-ized water, tap wa...

Page 7 - The iron will automatically; Dry Ironing; Figure C — Dry

4. Turn the TEMPERATURE SELEC-TOR DIAL to the appropriate settingand allow to preheat for approxi-mately 45 seconds. NOTE: The iron will automatically shut off after one hour. (see“Automatic Shut-Off” page 8) Dry Ironing Turn the ADJUSTABLE STEAM/DRYDIAL to the INDICATOR MARK forDry to iron without ...

Page 8 - Adjustable Steam; and; Figure F — Adjustable Steam

8 AUTOMATICSHUT-OFF Adjustable Steam 1. The TEMPERATURE SELECTORDIAL must be set within the steamband (settings 4 thru 7) in order toproduce adjustable steam. 2. Turn the ADJUSTABLESTEAM/DRY DIAL to the INDICATORMARK for (light), (medium), and (heavy) settings. (Figure F) Use the HEAT SETTING GUIDE ...

Page 9 - Turn the TEMPERATURE SELECTOR DIAL to Off.; Store the iron on its heel rest to prevent water from; Care Of The Iron

9 SURGECLEAN™ 1. Turn the ADJUSTABLE STEAM/DRY DIAL to Dry. 2. Turn the TEMPERATURE SELECTOR DIAL to Off. 3. Unplug the iron. 4. Allow the iron to cool, wrap the cord, and clip it in placeusing the cord clip on the plug. 5. It is not necessary to empty the water if the iron is usedfrequently. 6. Sto...

Page 10 - EMPTYING THE IRON; Figure G

1. Is the iron plugged in and the green Power Light on?Press the PUSH ON Button. 2. If the Light is not on, will a lamp plugged into the out-let turn on? 3. Is the TEMPERATURE SELECTOR DIAL turned to afabric setting? 1. Check to see if there is enough water in the WaterTank. 2. Is the ADJUSTABLE STE...

Page 11 - or

FABRIC IRONING CHART 11 FABRIC ADJUSTABLE STEAM TEMP. IRONING INSTRUCTIONS ACRYLIC ACETATE NYLON SILK POLYESTER SOME RAYONS PERM. PRESS COTTONBLENDS WOOL COTTON LINEN Dry iron on wrong side. Press washables while damp. Dry iron on wrong side to prevent shine. Press washables whiledamp. Dry iron wash...

Page 12 - REPLACEMENT

12 For three years from the date of purchase, Searswill replace this electric appliance, free of charge,if defective in material or workmanship. TOOBTAIN REPLACEMENT UNDER THIS WARRANTY,SIMPLY RETURN THE SMALL APPLIANCE TO THENEAREST SEARS STORE IN THE UNITED STATES. This warranty gives you specific...