Black Box MT661A-SM - Manual
Black Box MT661A-SM – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – FlexPoint T1/E1 Copper to Fiber Line Driver; User Instructions; international standards and electrical ratings for the region.; Mounting Instructions:
- Page 3 – Coax E1 Connector; DCE
- Page 5 – Transmit/force 1’s to Fiber
- Page 6 – Alarm Relay Contacts
- Page 7 – Multimode
- Page 8 – Copper Cable Specifications:; Twisted-Pair cable for T1
BLACK BOX
NETWORK SERVICES
MT660A-MM
MT661A-SM
MT660A-MM-E
MT661A-SM-E
FlexPoint™ T1/E1 Copper to Fiber
Line Driver
CUSTOMER
Order toll-free in the U.S.: Call 877-877-BBOX
SUPPORT
(outside U.S. call 724-746-5500)
INFORMATION
FREE technical support 24 hours a day, 7 days a week;
Call 724-746-5500 or fax 724-746-0746
Mailing address: Black Box Corporation,
1000 Park Drive, Lawrence, PA 15055-1018
Web site:
www.blackbox.com
E-mail:
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
FlexPoint T1/E1 Copper to Fiber Line Driver User Instructions Description: The FlexPoint T1/E1 connects T1 and E1 devices, such as PBXs, CSUs and routers, via Multimode (MM) or single-mode (SM) fiber. Designed to extend the standard T1/E1 twisted pair or Coax network distances over fiber, this conve...
Fiber Optic Cable Attachment: Connect the fiber cables between the Flex Point T1/E1 converters. The transmit (Tx) must attach to the receive (Rx) side and the receive (Rx) side must attach to the transmit (Tx) side. Note: Use fiber cables that are compliant with the specifications that are outlined ...
Local Loop-Back (L/LB) This switch will set the Flex Point T1/E1 converter in a loop-back mode on both the fiber and copper connections. By turning the switch to the normal position, the unit will resume to normal operation. FO-Tx FO-Rx CuRx CuTx Loopback Enabled Transmit/force 1’s to Fiber This swi...
