Black Box LMC200A-2PS-DC - Manual
Black Box LMC200A-2PS-DC – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – TRADEMARKS; ELECTRICAL SAFETY STATEMENT
- Page 3 – FlexPoint; Powered Chassis; GENERAL DESCRIPTION; POWER SUPPLY REPLACEMENT
- Page 4 – CONTROLS AND INDICATORS; Function; SITE PREPARATION REQUIREMENTS; Tools and Equipment Required:
Omnitron Systems Technology, Inc.
FlexPoint
TM
Powered Chassis
48V Power Redundant
14 Module Chassis
User’s Manual
Hot Attachment of Power Supplies:
1. Unpack the power supply carefully. Inspect for any damages. If any damage is
observed, do not use the power supply and call (949) 250-6510 to report the
damage immediately and request a replacement unit.
2. Attach the power supply to the chassis and reconnect the 48VDC power source
to the FlexPoint power supply.
3. Locate the 48VDC circuit breaker and switch the circuit breaker to the ON
position.
4. Turn the FlexPoint Chassis power supply ON.
5. Observe the LED in the front of the chassis indicating that the power has been
restored.
SPECIFICATION
Indicators:
Power ON:
LED (2), Yellow, power applied
Dimensions / Weight: W:19.0"xD:7.0"xH:3.5" / 9 lb.
Power:
48VDC / 3.0 Amps (for model 4386)
2ea. 48VDC / 3.0 Amps (for model 4385)
Environmental:
Temperature:
0 to 40 degrees C
Humidity:
0-90% (non-condensing)
JULY 2001
LMC200A-2PS-DC
LMC200A-DC
PSFP20-DC
CUSTOMER
SUPPORT
INFORMATION
Order toll-free in the U.S.: Call 877-877-BBOX (outside U.S. call 724-746-5500)
FREE technical support 24 hours a day, 7 days a week; Call 724-746-5500 or fax 724-746-0746
Mailing address: Black Box Corporation, 1000 Park Drive, Lawrence, PA 15055-1018
Web site: www.blackbox.com
z
E-mail: [email protected]
©Copyright 1999-2001. Black Box Corporation. All rights reserved.
1 0 0 0 P a r k D r i v e
z
L a w re n c e , PA 1 5 0 5 5 - 1 0 1 8
z
7 2 4 - 7 4 6 - 5 5 0 0
z
F a x 7 2 4 - 7 4 6 - 0 7 4 6
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 It is very strongly recommended that a replacement power supply unit be installedas soon as possible in order to prevent overheating of the chassis unit. THE POWER SUPPLIES ARE HOT-SWAPPABLE AND CAN BE REPLACEDWITHOUT SHUTTING THE NETWORK DOWN. HOWEVER, WHEN REMOVINGAND REPLACING A POWER SUPPLY UN...
Omnitron Systems Technology, Inc.3 FlexPoint TM Powered Chassis User’s Manual GENERAL DESCRIPTION The FlexPoint TM Powered Chassis is a chassis capable of holding up to 14 FlexPoint TM media converter modules. It is equipped with two power supplies in a power-redundant configuration. This User’s Man...
4 CONTROLS AND INDICATORS LEDs Display:The Powered Chassis features two LEDs on the left front of the chassis, theseLEDs display the status of the two power supplies. Function Color/State Description Top LED Yellow / ON Power OK in right power supply Bottom LED Yellow / ON Power OK in left power sup...
