Black Box IC1474A-F - Manual

Black Box IC1474A-F

Black Box IC1474A-F – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
Page: / 2
Loading the manual

IC1474A-F 703 p. 1 / 2

5853

Port Powered RS-232 to RS-422 Converter

,

DB9F to DB9F

Product Code IC1474A-F

This is a port-powered, two-channel RS-232 to RS-422 converter. It converts TD and RD RS-232

lines to balanced RS-422 signals. The unit is powered from the RS-232 handshake lines DTR and RTS.
Only one of these lines must be present, and the unit will work regardless of whether the lines are high or
low. Both the RS-422 driver and receiver are enabled at all times.

To satisfy the requirements of some software, the RS-232 handshake lines are looped back (tied
together). RTS is connected to CTS, and DTR is connected to DCD and DSR.

Connections

This converter is configured to transmit both directions between an RS-232 and RS-422 system. The

RS-232 side is pinned out to connect directly into the COM port on your computer or any other DTE
device (Table 1). The RS-422 side of the converter is pinned out as described in Table 2.

When connecting to a RS-422 system, the converter

must

be connected with the proper polarity as

shown in Figure 1. When no data is being sent the RS-232 line is negative and the RS-422 line TD(A) is
negative with respect to TD(B).













Figure 1 - Connection to an RS-422 System

8

3

2

7

4

TD(A)-
TD(B)+
RD(A)-
RD(B)+

GND

GND

RD(A)-

TD(A)-

RD(B)+

TD(B)+

422PP9R

DB9 female

RS-422


Black Box Corporation - 1000 Park Drive - Lawrence, PA 15055-1018

Tech Support and Ordering: 724-746-5500 - Fax: 724-746-0746

To contact us about Black Box products or services:

[email protected]

Table 1 - RS-232 Pin Out

Signal

DB9 Signal Pin #

TD 3

RD 2

RTS 7
CTS 8

DTR 4

DSR 6

DCD 1

GND 5

Table 2 - RS-422 Pin Out

Signal

DB9 Female Pin #

TD A (-)

8

TD B (+)

3

RD A (-)

2

RD B (+)

7

GND 4,

6

Converter

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Other Black Box Models

All Black Box Other