Black Box Ethernet NIC - Manual
Black Box Ethernet NIC – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Installation; Description; LH1350C Serial Fast Ethernet NICs; LH1350C module configuration
- Page 3 – Cable Specifications; Fiber cable; Technical Specifications
- Page 4 – Troubleshooting; Diagnostics LEDs and Boot ROM; LEDS; Contact Us
- Page 5 – Compliance Information
USER’S GUIDE
LH1350C-ST-R3
LH1350C-SC-R3
100Base-FX, Fast Ethernet Fiber NICs
The Black Box LH1350C series of fast
Ethernet NICs
(Network Interface
Cards)
provide a 100Base-FX fiber port
to deliver low-cost fiber optic
connectivity to the desktop in fiber-rich
LAN environments. With driver support
for most operating systems and PCI 2.2
plug-and-play capability, these fast
Ethernet NICs can be installed in
virtually any PC on the network.
LH1350C-ST-R3
ST, 1300 nm multimode, 2 km
(1.2 miles
)*
LH1350C-SC-R3
SC, 1300 nm multimode, 2 km
(1.2 miles)
*
Part Number
*Typical maximum cable distance. Actual distance is dependent upon the physical
characteristics of the network installation.
Installation . . . . . . . . . . . . . . . . . . .2
Cable Specifications . . . . . . . . . . .4
Technical Specifications . . . . . . . .5
Troubleshooting . . . . . . . . . . . . . . .6
Contact Us . . . . . . . . . . . . . . . . . . .7
LH1350C-xx-R3
Port One - Duplex Fiber-Optic 100Base-FX
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Installation Description The LH1350C module has a bootable ROM socket. The two LED indicators,LINK/ACT and FDX located on the bracket, show network/board link, activities,collision, and full-duplex statuses. See Figure 1. LH1350C module installation C A U T I O N : W e a r a g r o u n d i n g s t r ...
LH1350C Serial Fast Ethernet NICs 4 24-hour Technical Support: 1-724-746-5500 Cable Specifications Fiber cable Bit error rate: <10-9 Single mode fiber (recommended) : 9 µm Multimode fiber (recommended) : 62.5/125 µm Multimode fiber (optional) : 100/140, 85/140, 50/125 µm LH1350C-ST-R3, LH1350C-SC...
LH1350C Serial Fast Ethernet NICs 6 24-hour Technical Support: 1-724-746-5500 Troubleshooting Diagnostics LEDs and Boot ROM LEDS The LINK/ACT LED lights when a fiber cable or twisted pair cable connectionis good. It blinks to indicate activity. The collision and full-duplex LED report board operatin...
