BISSELL BS-9400F - Manual
BISSELL BS-9400F – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Consumer states unit will; not spray to the floor; and; no spray from the; Lift grey latch at back of tank to remove Tank Lid
- Page 3 – Yes
- Page 4 – Option 4
- Page 5 – Check Small Brush Belt to ensure it is in place
- Page 6 – Locate the Small Brush Belt, has it come off the Brush end?; for spare parts and
- Page 8 – Consumer states; no or low suction
- Page 9 – No; for spare parts and order replacement Tank-in-Tank Assembly
- Page 10 – Remove the tank-in-tank assembly from the unit
- Page 11 – Consumer states unit; will spray through the hose; Turn unit off
- Page 12 – will spray at the floor; for
- Page 13 – Consumer states unit is; releasing too much solution
- Page 14 – will not release any shampoo
- Page 16 – no suction through the upholstery hose; but does have; No, refer to ‘Low or no suction’ above
- Page 17 – Consumer reports the; water; that is; sprayed out is not hot; Is the machine switched on at the power outlet in the wall?
- Page 18 – Consumer states the; brush will not turn; No, proceed to Solution 2
- Page 21 – Consumer states the unit has; no power; Align upper handle screw holes and top half of tool caddy holes
- Page 22 – unit drags on carpet; Yes, Is the plastic around the screw cracked?; to order
- Page 23 – Consumer States the
- Page 24 – unit is very noisy
Troubleshooting
Bissell ProHeat 2X Select BS-9400F
CONTENTS PAGE
Consumer states unit will
not spray to the floor
and
no spray
from the upholstery tool…………………………………………………….Page 2
Consumer states
no or low suction…………………….…………………..Page 8
Consumer states unit
will spray through the hose
, but
not to
the floor…………………………………………………………………………Page 11
Consumer states unit
will spray at the floor
, but
not through the
upholstery hose………………………………………………………………Page 12
Consumer states unit is
releasing too much solution
or only
Shampoo……………………………………………………………………….Page 13
Consumer states unit
will not release any shampoo…………………….Page 14
Consumer states
no suction through the upholstery hose
but does
have suction at the floor
…………………………………..………………......Page 16
Consumer states the
water
that is
sprayed out is not hot…………....…Page 17
Consumer states the
brush roller will not turn…………………………...Page 18
Consumer states the unit has
no power……………………………………Page 21
Consumer states the
unit drags on carpet………………………………..Page 22
Consumer States the
Tank-In-Tank is leaking
at base of the
tank
……………………………………………………………………...………Page 23
Consumer states
unit is very noisy…………………………………….….Page 24
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Other Manuals for BISSELL BS-9400F
Summary
Prepared by Monique Lania 2 Call Servicing Guide ProHeat 2X 9400F.doc Consumer states unit will not spray to the floor and no spray from the upholstery tool Solution 1: Solution 1: The Red float door inside lid of 2-in-1 Tank may have closed as a result of the Tank being full of dirty water and need...
Prepared by Monique Lania 3 Call Servicing Guide ProHeat 2X 9400F.doc Solution 2: Has Tank-in-tank been emptied and refilled and has the SmartMix (solution) bottle been filled with solution? No, empty and refill water tank and fill SmartMix bottle (solution bottle) with Bissell Solution, problem sol...
Prepared by Monique Lania 4 Call Servicing Guide ProHeat 2X 9400F.doc Solution 3: Solution 2: Yes Yes Remove SmartMix bottle from unit Advise customer to call Bissell Free Call 1800 number again and press Option 4 for spare parts and order replacement SmartMix bottle Yes, reattach gasket by pushing ...
