Bionaire BCM6100 - Manual
Bionaire BCM6100 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – PLEASE SAVE THESE; CONSUMER SAFETY INFORMATION; HUMIDIFIER SAFETY; PLEASE READ AND SAVE; IMPORTANT SAFEGUARDS
- Page 3 – MANUAL OPERATION WITH REMOTE; HOW YOUR COOL MOISTURE HUMIDIFIER WORKS; PRE-OPERATING INSTRUCTIONS
- Page 4 – ) At any time if you unlock the remote and push the; Using Timer to Turn Unit On
- Page 5 – ) At any time if you unlock the remote and push the; REPLACING THE WICK FILTER
- Page 6 – SERVICE INSTRUCTIONS; visit our website; WARRANTY; Trouble Shooting for your Cool Mist Humidifier
Read instructions before operating. Retain for future reference.
Instruction Leaflet
INFO-LINE
If after having read this leaflet, you have any questions
or comments on your humidifier,
call
1-800-788-5350
in North America.
☎
428-0848
cool moisture
BEDROOM
humidi
fier
MODEL
BCM6100
BCM6100U_Eng.qxd 8/14/02 5:41 PM Page 1
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
1 2 15. Humidifier should be unplugged when not in use. 16. NEVER tilt, move, or attempt to empty unit while it is operating. Shut off and unplug before removing the water reservoir and moving the unit. 17. This humidifier requires daily and weekly maintenance. Refer to daily and weekly cleaning pro...
3 4 beep every two seconds until it is synced with the remote. To sync unit with remote follow the below steps:Unlock remote. (This must be done before each use of theremote) To Unlock remote, hold down the mode button for 2seconds until the lock symbol disappears on the screen. Once the remote is u...
5 6 B. Remote is ON and Unit is ON: 1. Press the Mode button on the unit. The unit will then switch “Modes”; either from “High” to “Med”,“Med” to “Low”, or “Low” to “Off”. The unit’s lightswill reflect the change. The Remote will display a different mode – the mode in which itwas left. If a button i...
