BILLY GOAT KD512SP - Manual

BILLY GOAT KD512SP – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

Page 2 – Part No. 890604 Form No. F021602C; IN THE INTEREST OF SAFETY; DO NOT transport unit with fuel in tank.; fins because contact may cause burns.; VIBRATION; SOUND; TABLE OF CONTENTS; The Engine Exhaust from this product contains chemicals known
Page 3 – Part No. 890604 Form No. F021602C; PUT OIL IN ENGINE BEFORE STARTING; ASSEMBLY; Tamper; QUICK DISCONNECT; Literature Assy; Debris Bag
Page 4 – Manual; Literature Checklist; CONTROLS; INSTRUCTION LABELS; Start; WARNING
Page 5 – VACUUM NOZZLE HEIGHT ADJUSTMENT:; is; PUT OIL IN ENGINE BEFORE STARTING.; OPERATION; STARTING; VACUUMING OPERATION; Use caution when using chipper; Your; TERMITE; chipper is designed to process tree branches; CLEARING A CLOGGED CHIPPER HOPPER (TKD ONLY); Under normal circumstances, allow time for machine; CHIPPING OPERATION; Maximum
Page 6 – continued; more weight than you can lift.; DO NOT place bag on or near hot surface, such as engine.; Run; Run machine at idle to quarter throttle.; DO NOT leave debris in bag while in storage.; DEBRIS BAG
Page 7 – Never store engine indoors or in enclosed poorly ventilated; Do not store with debris in bag.; STORAGE; Tamper Storage Position; PROPULSION
Page 8 – MAINTENANCE; CHIPPER BLADE REMOVAL AND SHARPENING-TKD ONLY; shim washer must be used.; Chipper blades are normal replaceable wear items.; Chipper blade is sharp.; Be careful to avoid heat buildup; Chipper blade installation is in reverse order of removal.; INCORRECT; your unit may or may not have required the use of shim; EDGE OF CHIP; IMPELLER REMOVAL and CHIPPER ADJUSTMENT; Wait for engine to cool and disconnect spark plug.; IMPELLER REMOVAL
Page 9 – Maintenance Operation; Maintenance Schedule; Carriage; CLUTCH ADJUSTMENT; DRIVE; CHAIN REPLACEMENT
Page 10 – PARTS DRAWING
Page 12 – Engine Service and Warranty; Contact your nearest engine manufacturer's authorized; WARRANTY PROCEDURE; Serial Plate; TROUBLESHOOTING; Before Requesting Service Review These Suggestions; PARTS LIST

Loading the manual

Part No. 890604 Form No. F021602C

Page 1 of 12

T h a n k Y o u f o r S e l e c t i n g

Operator Owner's Manual

The Powerful

KD or TKD TERMITE

SELF PROPELLED VACUUM CHIPPER

UNIT SIZE:

OVERALL LENGTH: 62"(1.57m) OVERALL WIDTH 26.75" (0.68m)

OVERALL HEIGHT 42" (1.07m)

OPTIONAL ACCESSORIES

Specifications

PRO FELT BAG
P/N 890023

For use in dusty conditions.

FELT BAG COVER
P/N 900801

Directs dust downward away from
operator.

OPTIONAL DEBRIS BAGS

STANDARD TURF PRO
DEBRIS BAG
P/N 890028.

Standard on TKD models. For
use in leaves and grass in non-
dusty conditions.

NOZZLE WEAR PLATES
P/N 890413.

Extends nozzle life when
used along curbs and hard
surfaces.

ON BOARD VACUUM
HOSE KIT
P/N 890041.
4"

(102mm)

x 7'

(2.13m)

For vacuuming in hard to
reach areas.

SHREDDER KIT
P/N 890209.

Shreds leaves, dramatically
reducing total volume, 12:1.

ZIPPERLESS PRO BAG
P/N 890309

For non dusty conditions that
are damaging to zippers.

KD512SP, TKD512SP

KD512SP

TKD512SP

ENGINE:H.P.

5.5 (4.1kW)

ENGINE:TYPE

B&S DIAMOND I/C

ENGINE:FUEL CAP.

1.5qt. (1.4L)

ENGINE:OIL CAP.

0.63qt. (0.6L)

WEIGHT:UNIT

117# (53.1 kg)

133# (60.3 kg)

WEIGHT:SHIPPING

140# (63.5 kg)

156# (70.8 kg)

ENGINE WEIGHT:

26# (11.8 kg)

HOSE EXTENSION KIT
P/N 890045.

Kit contains a connector and a
clamp, Hose is not included.

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 2 - Part No. 890604 Form No. F021602C; IN THE INTEREST OF SAFETY; DO NOT transport unit with fuel in tank.; fins because contact may cause burns.; VIBRATION; SOUND; TABLE OF CONTENTS; The Engine Exhaust from this product contains chemicals known

Part No. 890604 Form No. F021602C Page 2 of 12 IN THE INTEREST OF SAFETY THIS SYMBOL MEANS WARNING OR CAUTION. DEATH, PERSONAL INJURY AND/OR PROPERTYDAMAGE MAY OCCUR UNLESS INSTRUCTIONS ARE FOLLOWED CAREFULLY. BEFORE STARTING ENGINE, READ AND UNDERSTAND THE “ENTIRE OPERATOR'S MANUAL &ENGINE MANU...

Page 3 - Part No. 890604 Form No. F021602C; PUT OIL IN ENGINE BEFORE STARTING; ASSEMBLY; Tamper; QUICK DISCONNECT; Literature Assy; Debris Bag

Part No. 890604 Form No. F021602C Page 3 of 12 PUT OIL IN ENGINE BEFORE STARTING Read all safety and operating instructionsbefore assembling or starting this unit. 890028 TKD Check These items should be included in your carton. Ifany of these parts are missing, contact your dealer. ASSEMBLY PACKING ...

Page 4 - Manual; Literature Checklist; CONTROLS; INSTRUCTION LABELS; Start; WARNING

Part No. 890604 Form No. F021602C Page 4 of 12 Owner's Manual Literature KD / TKD Accessories Check Owner's Manual 890604 Literature KD / TKD Accessories 890409 Check Literature Checklist Check EU Declaration of Conformity & EU Distributor List 890393 EU Declaration of Conformity & EU Distri...