Page 3 - FROM THE DESK OF OUR PRESIDENT; Dear new owner of a Bertazzoni appliance,
FROM THE DESK OF OUR PRESIDENT Dear new owner of a Bertazzoni appliance, I want to thank you for choosing one of our beautiful products for your home. My family started manufacturing kitchen appliances in Italy in 1882, building areputation for quality of engineering and passion for good food. Today...
Page 5 - USER MANUAL VALIDITY
USER MANUAL VALIDITY The following manual is valid for all the product codes mentioned below: • MAS486BTFEPXT • PRO486BTFEPGIT • PRO486BTFEPNET • PRO486BTFEPROT • PRO486BTFEPART • PRO486BTFEPBIT • PRO486BTFEPXT • HER486BTFEPAVT • HER486BTFEPNET • HER486BTFEPXT 5
Page 6 - CONTENTS
6 CONTENTS INSTALLATION MANUAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 WARNINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...
Page 9 - WARNINGS; DO NOT install this range outdoors.
WARNINGS To ensure proper and safe operation, the appliance mustbe properly installed and grounded by a qualified technician.DO NOT attempt to adjust, repair, service, or replace anypart of your appliance unless it is specifically recommendedin this manual. All other servicing should be referred to ...
Page 10 - See anti-tip device installation instructions for details.; WARNING; Cancer and Reproductive Harm —; DATA RATING LABEL
WARNINGS Fig. 1 WARNING Warning-tipping hazard A child or adult can tip over the range andbe killed. Install the anti-tip device to the structureand/or the range. Verify the anti-tip devicehas been properly installed and engaged. Engage the range to the anti-tip device by anti-tip bracketsor anti-ti...
Page 11 - BEFORE INSTALLATION; must; TYPE OF GAS; resulting
BEFORE INSTALLATION • This appliance shall only be installed by an authorizedprofessional. • This appliance shall be installed in accordance with themanufacturer’s installation instructions. • This appliance must be installed in accordance with thenorms & standards of the country where it will b...
Page 12 - VENTILATION PREPARATION; SELECT HOOD AND BLOWER MODELS; replacement
VENTILATION PREPARATION This range will best perform when installed with Bertazzoniexhaust hoods. These hoods have been designed to workin conjunction with the Bertazzoni range and have thesame finish for a perfect look. Before installation of the exhaust hood, consult local orregional building and ...
Page 13 - SPECIFICATIONS
SPECIFICATIONS Fig. 2 • A 48″ • B 37″½ MAX Burner Injector Gas Pressure Max Rate Min Rate By–pass diam.[mm] Type [iwc] [Btu/hr] [W] [Btu/hr] [W] diam.[mm] Auxiliary 0.90 0.54 NG LP (Propane) 4″ 10″ 3,500 3,300 1,025 967 900 900 264 264 Regulated 0.29 Semi-rapid 1.18 0.70 NG LP (Propane) 4″ 10″ 5,900...
Page 14 - CLEARANCE DIMENSIONS; CAUTION; CABINET
CLEARANCE DIMENSIONS INSTALLATION ADJACENT TO KITCHENCABINETS This range may be installed directly adjacent to existingcountertop high cabinets (36″ or 91.5 cm from the floor). For the best look, the worktop should be level with thecabinet countertop. This can be accomplished by raisingthe unit usin...
Page 15 - INSTALLATION REQUIREMENTS; installation area for the connection; ELECTRICAL; mounted; GAS; Check all local code requirements.
INSTALLATION REQUIREMENTS Fig. 5 Fig. 6 installation area for the connection ELECTRICAL A properly-grounded horizontally- mounted electrical receptacle should be installed no higher than 3″ (7.6 cm)above the floor, no less than 2″ (5 cm) and no more than 8″(20.3 cm) from the left side (facing produc...
Page 16 - ELECTRICAL CONNECTION; ELECTRICAL GROUNDING
ELECTRICAL CONNECTION WARNING ELECTRICAL SHOCK HAZARD Disconnect electrical power at the circuitbreaker box or fuse box before installingthe appliance. Provide appropriate ground for the appliance. Use copper conductors only. Failure to follow these instructions couldresult in serious injury or deat...
Page 17 - FOUR WIRES CONNECTION
ELECTRICAL CONNECTION FOUR WIRES CONNECTION • Connect the L1 receptacle terminal to the incomingBLACK electrical supply wire (L1-hot wire) • Connect the L2 receptacle terminal to the incoming REDelectrical supply wire (L2-hot wire) • Connect the NEUTRAL receptacle terminal to theincoming NEUTRAL (WH...
Page 18 - WIRING DIAGRAM
WIRING DIAGRAM The electric wiring diagrams and schematics are attached behind the range, and should not be removed except by aservice technician, then replaced after service. 48 RIGHT SIDE Fig. 11 18
Page 20 - GAS CONNECTION; MANUAL SHUT-OFF VALVE; Gas Pipe
GAS CONNECTION WARNING DO NOT USE AN OPEN FLAME WHENCHECKING FOR LEAKS! Leak testing of the appliance shall be conducted accordingto the manufacturer’s instructions. Before placing the oveninto operation, always check for leaks with soapy watersolution or other acceptable method. Check for gas leaka...
Page 21 - PRESSURE REGULATOR; Range cooker gas pipe gas entry; IMPORTANT
GAS CONNECTION PRESSURE REGULATOR Since service pressure may fluctuate with local demand,every gas cooking appliance must be equipped with apressure regulator on the incoming service line for safe andefficient operation. The pressure regulator shipped with the appliance has twofemale threads 1/2″ NP...
Page 22 - INSTALLATION; APPLIANCE INSTALLATION; UNPACKING THE RANGE; REMOVING THE OVEN DOOR; Pull oven door upwards and remove.; Do not lift or carry the oven door by its handle!; This may damage the hinges.
INSTALLATION APPLIANCE INSTALLATION UNPACKING THE RANGE • Remove all packing materials from the shipping palletbut leave the adhesive-backed foam layer over brushed-metal surfaces to protect it from scratches until therange is installed in its final position. Only the film on theside panels should b...
Page 23 - INSTALLING THE LEGS; Fix the front guard with its two screws.
INSTALLATION INSTALLING THE LEGS Bertazzoni ranges must be used only with the legs properlyinstalled. Four height-adjustable legs are supplied with the range inthe polystyrene container situated over the appliance. Before installing the legs, position the appliance near itsfinal location as the legs...
Page 24 - INSTALLING THE ISLAND TRIM
INSTALLATION INSTALLING THE ISLAND TRIM The island trim must be installed prior to operation of theappliance for appropriate ventilation of the oven compartment. The island trim is only placed on the cooktop, remove alltape and packaging before installing it. Fig. 18 Fig. 19 INSTALLING BACKGUARD (OP...
Page 25 - INSTALLING THE ANTI-TIP DEVICES; Once; CLOSED RING
INSTALLING THE ANTI-TIP DEVICES ANTI-TIP BRACKETS The anti-tip bracket shipped with the range must beproperly secured to the rear wall as shown in the picturebelow. The height of the bracket from the floor must be determinedafter the range legs have been adjusted to the desiredheight and after the r...
Page 26 - GAS CONVERSION; Before; STEP 1: PRESSURE REGULATOR
GAS CONVERSION WARNING Before carrying out this operation, disconnect the appliance from gas andelectricity. Gas conversion shall be conducted by afactory-trained professional. Call the customer service hotline to identifya factory-trained professional near yourhome. The gas conversion procedure for...
Page 27 - STEP 2: SURFACE BURNERS; SURFACE BURNERS; yellow flames: further adjustment is required
GAS CONVERSION STEP 2: SURFACE BURNERS To replace the nozzles of the surface burners, lift up theburners and unscrew the nozzles shipped with the rangeusing a 7 mm (socket wrench). Replace nozzles using the conversion set supplied with therange or by a Bertazzoni authorized parts warehouse. Eachnozz...
Page 28 - STEP 4: MINIMUM FLAME ADJUSTMENT; screw adjust the outer
GAS CONVERSION STEP 4: MINIMUM FLAME ADJUSTMENT WARNING These adjustments should be made onlyfor use of the appliance with natural gas.For use with liquid propane gas, the chokescrew must be fully turned in a clockwisedirection. SURFACE BURNERS Light one burner at a time and set the knob to theMINIM...
Page 29 - INSTALLATION CHECKLIST
INSTALLATION CHECKLIST A qualified installer should carry out the following checks: Range mounted on its legs Island trim or Backguard attached according toinstruction Anti-tip device properly installed Clearance to cabinet surfaces as manufacturer’sguideline Proper ground connection Gas service lin...
Page 30 - FINAL PREPARATION
FINAL PREPARATION • Before using the oven, remove any protective wrap fromthe stainless steel. • All stainless steel body parts should be wiped with hot,soapy water and with a liquid stainless steel cleanser. • If buildup occurs, do not use steel wool, abrasive cloths,cleaners, or powders! • If it i...
Page 31 - BERTAZZONI SERVICE; If located in the USA:; Purchase Date
BERTAZZONI SERVICE Bertazzoni is committed to providing the best customer andproduct service. We have a dedicated team of trainedprofessionals to answer your needs. If you own a Bertazzoni appliance and need service in theUS or Canada please use the following contact information: [email protected] T...
Page 32 - TO PREVENT FIRE OR SMOKE DAMAGE
WARNINGS Warning and Important Safety Instructions appearing in thismanual are not meant to cover all possible conditions andsituations that may occur. Common sense, caution, andcare must be exercised when installing, maintaining, oroperating the appliance. Read and follow all instructions before us...
Page 33 - COOKING SAFETY
WARNINGS COOKING SAFETY • Once the unit has been installed as outlined in theInstallation Instructions, it is important that the fresh airsupply is not obstructed. The use of a gas cookingappliance results in the production of heat and moisturein the room in which it is installed. • Ensure that the ...
Page 34 - Reorient or relocate the receiving antenna
WARNINGS INDUCTION COOKING SURFACES • Surface areas on or adjacent to the unit may be hotenough to cause burns. Do not touch the cooking areaas long as the light indicating residual heat on the glass-ceramic cooktop area, is “on”; this indicates that thetemperature in the relative area is still high...
Page 35 - WARNING-TIPPING HAZARD; Cancer and Reproductive Harm
WARNINGS WARNING-TIPPING HAZARD Children and adults can tip over the range if it has not beensecured. This may lead to fatal injuries. To reduce the risk of the appliance tipping, it must besecured and connected using the anti-tip device accordingto the installation instructions. Re-engage the anti-...
Page 36 - WORKTOP AND KNOBS LAYOUT; Heating element
WORKTOP AND KNOBS LAYOUT Fig. 32 Heating element 1 Oven functions selector 2 Oven thermostat 3 Left front burner 4 Left rear burner 5 Central front burner 6 Central rear burner 7 Right front burner 8 Right rear burner 9 Auxiliary oven thermostat 10 Electric griddle 1 2 3 4 3 5 7 6 8 4 5 6 7 8 9 10 1...
Page 37 - GAS COOKTOP; BURNER CAPS AND GRATES
GAS COOKTOP BURNER CAPS AND GRATES The burners and the burner caps must be properly placedfor the cooktop to function properly. Fig. 33 The burner grates must be properly placed inside therecess on the cooktop. MAKING SURE THE FLAME IS OPTIMAL The flame should be stable with no excessive noise orflu...
Page 38 - USING THE POWER BURNERS; WOKS; NOTE; GAS BURNER DIMENSIONS AND RECOMMENDED PAN SIZE; Burner
GAS COOKTOP USING THE POWER BURNERS To give further flexibility, the dual power burner can be usedas a single simmer burner if the central burner alone isignited or as a power burner if the outer burner is alsoignited. To light the central burner, press in the control knob andturn it anti-clockwise ...
Page 39 - ELECTRIC GRIDDLE; Available on 48′′ models only.; PREPARING THE GRIDDLE; To adjust move the griddle plate to the side.; SEASONING THE GRIDDLE; Turn the control knob to a maximum setting.; USING THE ELECTRIC GRIDDLE; use metal utensils on the griddle surface. Care; DO NOT; use knives for cutting directly on the griddle plate.
ELECTRIC GRIDDLE Available on 48″ models only. The electric stainless steel griddle is manufactured from 3/16 inches stainless steel designed for maximum heatretention. Use extreme caution when operating the griddleto avoid burn hazard! PREPARING THE GRIDDLE • Check the griddle plate adjustment by p...
Page 40 - RECOMMENDED GRIDDLE TEMPERATURES; Food
ELECTRIC GRIDDLE RECOMMENDED GRIDDLE TEMPERATURES Food Knob position Setting Eggs 3 300 ℉ to 320 ℉ (150 ℃ to 160 ℃ ) Bacon; Breakfast Sausage 3-4 350 ℉ to 375 ℉ (177 ℃ to 190 ℃ ) Toasted Sandwiches 3 320 ℉ to 350 ℉ (160 ℃ to 177 ℃ ) Boneless Chicken Breasts 3-4 350 ℉ to 375 ℉ (177 ℃ to 190 ℃ ) Bonel...
Page 41 - ELECTRIC OVEN; MAIN ELECTRIC OVEN; Place rack in desired position and shut the door.
ELECTRIC OVEN MAIN ELECTRIC OVEN WARNING When using the oven for the first time itshould be operated for 15-30 minutes at atemperature of about 500 ℉ /260 ℃ without cooking anything inside in order to eliminate any moisture and odors from theinternal insulation. SHELVES POSITIONS Shelves are mounted...
Page 43 - AUXILIARY ELECTRIC OVEN
ELECTRIC OVEN AUXILIARY ELECTRIC OVEN Available on 48″ models only. CAUTION When using the oven for the first time itshould be operated for 15-30 minutes at atemperature of about 500 ℉ /260 ℃ without cooking anything inside in order to eliminate any moisture and odors from theinternal insulation. SH...
Page 47 - OVEN TEMPERATURE INDICATOR; the gauge is for reference only.; SET THE GAUGE; Showroom: function reserved for retailer use only.; TIMER; Once the set time is finished, a sound will be heard.
ELECTRIC OVEN OVEN TEMPERATURE INDICATOR The range is equipped with a device to indicate thetemperature in the middle of the oven. This lets you checkthe temperature inside the oven and adjust food cookingtemperatures more accurately. When the oven is turned on, the heating elements will startworkin...
Page 48 - MEAT PROBE; Programming the meat probe.; To; that burns off all
ELECTRIC OVEN MEAT PROBE The meat probe allows you more control over how yourfoods are cooked by automatically disabling the specifiedcooking mode when a dish's desired temperature, definedby the cook, has been reached. The probe will indicate the internal temperature of the meatas it cooks. Program...
Page 49 - BEFORE SELF CLEANING THE OVEN; Remove all utensils and racks.; Remove racks
ELECTRIC OVEN BEFORE SELF CLEANING THE OVEN Wipe out large spillages, grease and any loose soil that canbe easily removed. Remove any soil that is outside thedoor seal area. This appliance is designed to clean theoven interior and the portion of the door that faces the ovencavity. The outer edges of...
Page 50 - Turn the function control knob to CLEAN.; AT THE END OF THE SELF-CLEAN CYCLE
ELECTRIC OVEN TO SET/START SELF-CLEAN CYCLE 1) Check that the oven cavity is completely empty and theoven door correctly closed. 2) Turn the function control knob to CLEAN. 3) Turn the temperature control knob to CLEAN. Afterthese 3 steps the cooling fans will activate, the ovendoor will lock automa...
Page 51 - TELESCOPIC GLIDES; Locate the pin on the glide that indicates the back.; REMOVING THE GLIDES; Gently pull down the front spring clip.
ELECTRIC OVEN TELESCOPIC GLIDES The telescopic glides fit any shelf level and work with thewire shelves provided as standard equipment. FITTING THE GLIDES 1) Locate the two spring clips at the front and back of theglides. 2) Locate the pin on the glide that indicates the back. 3) Choose the right le...
Page 52 - KEEPING YOUR BERTAZZONI CLEAN; following
KEEPING YOUR BERTAZZONI CLEAN BURN HAZARD Make sure the heating elements are turned off and allowedto cool completely before any cleaning and/or maintenanceoperation. THINGS TO AVOID • Do not use a steam cleaner to clean the range: thesteam could reach electrical components and cause ashort. • Do no...
Page 53 - SIMPLE MAINTENANCE; If located in the USA; REPLACING OVEN LIGHTS; SIDE OVEN LIGHT; Reconnect the oven to the electrical supply.
SIMPLE MAINTENANCE Keeping appliance area clear and free from combustiblematerials, gasoline and other flammable vapors or liquids. Not obstructing the flow of combustion and ventilation air.These simple tasks can be performed by the owner. Forany other maintenance task, we recommend employing atrai...
Page 54 - TOP OVEN LIGHT; Unscrew the glass cover and remove the halogen bulb.
SIMPLE MAINTENANCE TOP OVEN LIGHT Bulb type: halogen G9 120 V, 40 W • Make sure the heating elements are turned off andallowed to cool completely. Disconnect the appliancefrom the power supply. • Unscrew the glass cover and remove the halogen bulb. • Place a new halogen bulb in its slot. DO NOT touc...
Page 55 - TROUBLESHOOTING
TROUBLESHOOTING Here are answer to common problems you may experience.You are also welcome to call our toll free Customer Serviceline to troubleshoot any issue with your Bertazzoni. If located in the USA 866 905 0010 https://us.bertazzoni.com/more/support If located in CANADA 800 561 7265 https://ca...
Page 56 - TWO-YEAR LIMITED WARRANTY STATEMENT; WHAT THIS LIMITED WARRANTY COVERS; 0-Day Cosmetic warranty; GLASS PROTECTION POLICY
TWO-YEAR LIMITED WARRANTY STATEMENT WHAT THIS LIMITED WARRANTY COVERS The Warranty coverage provided by Bertazzoni SpA(“Bertazzoni”) in this statement applies exclusively to theoriginal Bertazzoni appliance (“Product”) sold to theconsumer (“Purchaser”) by an authorized Bertazzonidealer/distributor/r...
