BenQ MX511 - Manual

Introduction 8 Shipping contents Carefully unpack and verify that you have all of the items shown below. If any of these items are missing, please contact your place of purchase. Standard accessories The supplied accessories will be suitable for your region, and may differ from those illustrated. *T...

Introduction 9 Projector exterior view 1. External control panel (See "Projector" on page 10 for details.) 2. Lamp cover 3. Zoom ring 4. Focus ring 5. Lens cover 6. Vent (heated air exhaust) 7. Front IR remote sensor 8. Projection lens 9. Quick-release button 10. RGB (PC)/Component video (YP...

Introduction 10 Controls and functions Projector 6. Mode/EnterSelects an available picture setup mode. See "Selecting a picture mode" on page 34 for details.Activates the selected On-Screen Display (OSD) menu item. See "Using the menus" on page 27 for details. 7. SourceDisplays the s...

Introduction 12 Remote control 1. Power Toggles the projector between standby mode and on. See "Starting up the projector" on page 24 and "Shutting down the projector" on page 42 for details. 2. Freeze Freezes the projected image. See "Freezing the image" on page 40 for detai...

Introduction 13 Infra-Red (IR) remote control sensor is located on the front of the projector. The remote control must be held at an angle within 30 degrees perpendicular to the projector's IR remote control sensor to function correctly. The distance between the remote control and the sensor should ...

Positioning your projector 14 Positioning your projector Choosing a location Your room layout or personal preference will dictate which installation location you select. Take into consideration the size and position of your screen, the location of a suitable power outlet, as well as the location and...

Positioning your projector 15 Obtaining a preferred projected image size The distance from the projector lens to the screen, the zoom setting (if available), and the video format each factors in the projected image size. 4:3 is the native aspect ratio of this projector. To be able to project a compl...

Positioning your projector 16 How to determine the position of the projector for a given screen size 1. Select your screen size. 2. Refer to the table on page 17 and find the closest match to your screen size in the left columns labelled "Screen size" . Using this value, look across this row...

Positioning your projector 17 Projection dimensions Refer to "Dimensions" on page 64 for the center of lens dimensions of this projector before calculating the appropriate position. There is 3% tolerance among these numbers due to optical component variations. BenQ recommends that if you int...

Connection 18 Connection When connecting a signal source to the projector, be sure to: 1. Turn all equipment off before making any connections. 2. Use the correct signal cables for each source. 3. Ensure the cables are firmly inserted. • In the connections shown below, some cables may not be include...

Connection 19 Connecting a computer or monitor Connecting a computer The projector can connect to both IBM® compatibles and Macintosh® computers. A Mac adapter is needed if you are connecting legacy version Macintosh computers. To connect the projector to a notebook or desktop computer: 1. Take the ...

Connection 20 Connecting Video source devices You need only connect the projector to a Video source device using just one of the above connecting methods, however each provides a different level of video quality. The method you choose will most likely depend upon the availability of matching termina...

Connection 21 Connecting an HDMI source device The projector provides a HDMI input jack that allows you to connect it to an HDMI source device like a DVD player, a DTV tuner or a display. HDMI (High-Definition Multimedia Interface) supports uncompressed video data transmission between compatible dev...

Connection 22 Connecting a Component Video source device Examine your Video source device to determine if it has a set of unused Component Video output jacks available: • If so, you can continue with this procedure. • If not, you will need to reassess which method you can use to connect to the devic...

Connection 23 Connecting an S-Video/composite source device Examine your Video source device to determine if it has an unused S-Video/composite output jack available: • If it has both jacks, use the S-Video output jack for connection as the S-Video terminal provides better picture quality than the V...

Operation 24 Operation Starting up the projector 1. Plug the power cord into the projector and into a power outlet. Turn on the power outlet switch (where fitted). Check that the POWER indicator light on the projector lights orange after power has been applied. • Please use the original accessories ...

Operation 25 You can also press Source on the projector or remote control to select your desired input signal. See "Switching input signal" on page 31 for details. If the frequency/resolution of the input signal exceeds the projector's operating range, you will see the message 'Out of Range'...

Operation 26 Fine-tuning the image size and clarity 1. Adjust the projected image to the size that you need using the zoom ring. 2. Then sharpen the image by rotating the focus ring. Correcting keystone Keystoning refers to the situation where the projected image is noticeably wider at either the to...

Operation 27 Using the menus The projector is equipped with On-Screen Display (OSD) menus for making various adjustments and settings. Below is the overview of the OSD menu. The following example describes how to set the OSD language. 1. Press Menu/Exit on the projector or remote control to turn the...

Operation 28 Securing the projector Using a security cable lock The projector has to be installed in a safe place to prevent theft. Otherwise, purchase a lock, such as the Kensington lock, to secure the projector. You can locate a Kensington lock slot on the rear side of the projector. See item 19 o...

Operation 29 six-digit password, or if you did not record the password in this manual, and you absolutely do not remember it, you can use the password recall procedure. See "Entering the password recall procedure" on page 29 for details. If you enter an incorrect password 5 times in successi...

Operation 31 Switching input signal The projector can be connected to multiple devices at the same time. However, it can only display one full screen at a time. When starting up, the projector automatically searches for the available signals. Be sure the Quick Auto Search function in the SOURCE menu...

Operation 32 Magnifying and searching for details If you need to find the details on the projected picture, magnify the picture. Use the direction arrow keys for navigating the picture. • Using the remote control 1. Press Digital Zoom +/- to display the Zoom bar. 2. Press Digital Zoom + to magnify t...

Operation 33 About the aspect ratio In the pictures below, the black portions are inactive areas and the white portions are active areas. OSD menus can be displayed on those unused black areas. 1. Auto: Scales an image proportionally to fit the projector's native resolution in its horizontal or vert...

Operation 34 Optimizing the image Selecting a picture mode The projector is preset with several predefined picture modes so that you can choose one to suit your operating environment and input signal picture type. To select an operation mode that suits your need, you can follow one of the following ...

Operation 35 Using Wall Color In the situation where you are projecting onto a colored surface such as a painted wall which may not be white, the Wall Color feature can help correct the projected picture’s color to prevent possible color difference between the source and projected pictures. To use t...

Operation 37 For example, if you select Red and set its value at 0, only the saturation of pure red will be affected. Saturation is the amount of that color in a video picture. Lower settings produce less saturated colors; a setting of “0” removes that color from the image entirely. If the saturatio...

Operation 38 Setting the presentation timer The presentation timer can indicate the presentation time on the screen to help you achieve better time management when giving presentations. Follow these steps to utilize this function: 1. Press Timer Set up on the remote control or go to the SYSTEM SETUP...

Operation 39 2. Highlight Yes and press Mode/Enter to confirm. You will see the message “Timer is Off!” displaying on the screen. How to use the Timer On key? Timer On is a multi-functional key. • If the presentation timer is off, pressing this key displays a confirmation message. You can decide whe...

Operation 40 Freezing the image Press on the remote control to freeze the image. The word 'FREEZE' will display in the screen. To release the function, press any key (except the Page Up/Down key) on the projector or remote control. Even if an image is frozen on the screen, the pictures are running o...

Operation 41 Operating in a high altitude environment We recommend you use the High Altitude Mode when your environment is between 1500 m –3000 m above sea level, and ambient temperature is between 0°C–35°C. Do not use the High Altitude Mode if your altitude is between 0 m and 1500 m and ambient tem...

Operation 42 Personalizing the projector menu display The On-Screen Display (OSD) menus can be set according to your preferences. The following settings do not affect the projection settings, operation, or performance. • Menu display time in the SYSTEM SETUP: Basic > Menu Settings menu sets the l...

Operation 43 Menu operation Menu system Please note that the on-screen display (OSD) menus vary according to the signal type selected. Main menu Sub-menu Options 1. DISPLAY Wall Color Off / Light Yellow / Pink / Light Green / Blue / Blackboard Aspect Ratio Auto / Real / 4:3 / 16:9 / 16:10 KeystonePo...

Operation 46 Description of each menu • The default values listed in this manual, especially on pages 46-54 , are for reference only. They may vary between the projectors due to the continuous improvement to the products. FUNCTION (default setting/ value) DESCRIPTION (default setting/value) Wall Col...

Operation 47 FUNCTION (default setting/ value) DESCRIPTION (default setting/value) 3D Sync This projector features a 3D function which enables you to enjoy the 3D movies, videos, and sporting events in a more realistic way by presenting the depth of the images. You need to wear a pair of 3D glasses ...

Operation 49 FUNCTION (default setting/ value) DESCRIPTION (default setting/value) Brilliant Color Adjusts white peaking while maintaining correct color presentation. See "Adjusting Brilliant Color" on page 35 for details. This function is only available when User 1/2 is selected. Color Temp...

Operation 50 FUNCTION (default setting/ value) DESCRIPTION (default setting/value) Presentation Timer Reminds the presenter to finish the presentation within a certain time frame. See "Setting the presentation timer" on page 38 for details. Timer period Sets a preferred length of time for pr...

Operation 51 FUNCTION (default setting/ value) DESCRIPTION (default setting/value) Operation Settings Direct Power On Selecting On enables the function. See "Starting up the projector" on page 24 for details. Auto Power Off Allows the projector to turn off automatically if no input signal is...

Operation 52 FUNCTION (default setting/ value) DESCRIPTION (default setting/value) Quick Cooling Selecting On enables the function and the projector cooling time will be shortened to a few seconds. If you attempt to restart the projector right after the quick cooling process, it may not be turned on...

Operation 53 FUNCTION (default setting/ value) DESCRIPTION (default setting/value) Closed Caption Closed Caption Enable Activates the function by selecting On when the selected input signal carries closed captions. • Captions: An on-screen display of the dialogue, narration, and sound effects of TV ...

Operation 54 FUNCTION (default setting/ value) DESCRIPTION (default setting/value) FAQ-Image and Installation Displays possible solutions to problems you may encounter. FAQ-Features and Service Current System Status Source Shows the current signal source. Picture Mode Shows the selected mode in the ...

Maintenance 55 Maintenance Care of the projector Your projector needs little maintenance. The only thing you need to do on a regular basis is to keep the lens and case clean. Never remove any parts of the projector except the lamp. Contact your dealer if other parts need replacing. Cleaning the lens...

Maintenance 56 Lamp information Getting to know the lamp hour When the projector is in operation, the duration (in hours) of lamp usage is automatically calculated by the built-in timer. The method of calculating the equivalent lamp hour is as follows: Total (equivalent) lamp hour= 1 (hours used in ...

Maintenance 57 Timing of replacing the lamp When the Lamp indicator lights up red or a message appears suggesting it is time to replace the lamp, please install a new lamp or consult your dealer. An old lamp may cause a malfunction in the projector and in some instances the lamp may explode. The Lam...

Maintenance 58 Replacing the lamp • Hg - Lamp contains mercury. Manage in accordance with local disposal laws. See www.lamprecycle.org. • If lamp replacement is performed while the projector is suspended upside-down from the ceiling, make sure that no one is underneath the lamp socket to avoid any p...

Maintenance 61 Indicators Light Status & Description POWER TEMP LAMP Power events Orange Off Off Stand-by mode Green Flashing Off Off Powering up Green Off Off Normal operation Orange Flashing Off Off 1. The projector needs 90 seconds to cool down as it was abnormally shut down without the norma...

Troubleshooting 62 Troubleshooting The projector does not turn on. No picture Blurred image Remote control does not work The password is incorrect Cause Remedy There is no power from the power cable. Plug the power cord into the AC inlet on the projector, and plug the power cord into the power outle...

Specifications 63 Specifications All specifications are subject to change without notice. Optical Resolution(MX511) 1024 x 768 XGA (MS510) 800 x 600 SVGA Display system 1-CHIP DMD Lens F/Number F = 2.51 to 2.69, f = 21.95 to 24.18 mm Lamp 185 W lamp Electrical Power supply AC100–240V, 2.9 A, 50-60 H...

Specifications 64 Dimensions 264 mm (W) x 108.8 mm (H) x 211.4 mm (D) Ceiling mount installation 264 211.4 108.8 72 72.8 80 203 100.00 116.00 82.50 42 104.7 69.41 84.00 102.24 264 132 71.93 108.2 102.7 75 Ceiling mount screws:M4 x 8 (Max. L = 8 mm) Unit: mm

Specifications 65 Timing chart Supported timing for PC input Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz) Pixel Frequency (MHz) Mode 720 x 400 31.469 70.087 28.322 720 x 400_70 640 x 480 31.469 59.940 25.175 VGA_60 37.861 72.809 31.500 VGA_72 37.500 75.000 31.500 VGA_75 43.269 85.00...

Specifications 66 Supported timing for HDMI input Displaying a 1080i(1125i)@60Hz or 1080i(1125i)@50Hz signal may result in slight image vibration. Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz) Pixel Frequency (MHz) Mode 720 x 400 31.469 70.087 28.322 720 x 400_70 640 x 480 31.469 59....

Specifications 67 Supported timing for Component-YP b P r input Displaying a 1080i@60Hz or 1080i@50Hz signal may result in slight image vibration. Supported timing for Video and S-Video inputs Signal Format Horizontal Frequency (kHz) Vertical Frequency (Hz) 480i(525i)@60Hz 15.73 59.94 480p(525p)@60H...

Warranty and Copyright information 68 Warranty and Copyright information Limited warranty BenQ warrants this product against any defects in material and workmanship, under normal usage and storage. Proof of purchase date will be required with any warranty claim. In the event this product is found to...

Regulation statements 69 Regulation statements FCC statement CLASS B: This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that ...