Page 2 - Do not format memory using the FAT32 format.
Copyright All rights reserved. No part of this publication may be reproduced, transmitted, recorded, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, electronic, mechanical, recording, photocopying, or otherwise, without the prior permi...
Page 4 - Memo
Page 5 - Table of Contents
1 Table of Contents Introduction ................................................................................. 1System requirements .................................................................... 2Package contents .......................................................................... 3T...
Page 7 - Introducing the BenQ; Introduction; Thank you for purchasing the BenQ Joybee 200 MP3 Player!
1 Introducing the BenQ Joybee 200 MP3 Player Introduction Thank you for purchasing the BenQ Joybee 200 MP3 Player! The BenQ Joybee 200 MP3 Player offers high quality audioplayback and voice recording functions at low power con-sumption. The Joybee 200 supports MP3, WMA, and WAV music for-mats for yo...
Page 8 - System requirements; CPU: Pentium 200 MHz or faster
2 When the batteries are fully charged, Joybee 200 offers about 10 hours of continuous replay time for MP3 music. However, the exact replay time depends on the condition of the battery, the volume level and many other factors. System requirements Your PC must comply with the following requirements i...
Page 9 - Package contents
3 Package contents Check the contents of your Joybee 200 MP3 Player pack-age. Contact your dealer immediately if any of the follow-ing are missing or damaged. 1. BenQ Joybee 200 MP3 Player2. Carrying pouch3. Warranty card4. AC power adapter & plug5. Quick start guide6. Software CD-ROM (E-manual,...
Page 10 - Touring the BenQ Joybee 200 MP3 Player; Buttons and ports
4 Touring the BenQ Joybee 200 MP3 Player The following section describes the various components of the Joybee 200. Buttons and ports oybee J 200 MP3 Player REC MODE A-B VOL LINE IN T T Left View Front View Right View Bottom View 1 2 3 4 5 6 7 8 9 10 11
Page 11 - Putting leather strap on
5 Putting leather strap on Follw the steps below to put the leather strap on your Joy-bee 200. (1) (2) (3) (4)
Page 13 - Record; Item
7 (7) Power on/off, Play/Pause/ Stop/Enter • Press and hold for 2 seconds to turn on the Joybee 200. • Press and hold for 2 seconds to turn the player off. The message ‘System Off ’ is displayed on the screen before the power goes off. • Press once to play an audio file in play-back mode. Press once...
Page 14 - after force shutdown.
8 (9) Previous/Fast Rewind, Next/Fast Forward buttons • Press once to skip to the previous or next file in audio file playback mode. • Press and hold for 4 seconds to rewind or fast forward an audio file in playback mode. • Press once to scroll to the previous or next item in menu mode. • Press and ...
Page 15 - LCD display; Icon; Indicates random repeat mode.
9 LCD display The LCD screen displays information about the player mode and file information. The following table shows the icons displayed on the screen and their meanings. Icon Description Indicates audio file being scanned in forward direction (Forward).Indicates audio file is being scanned in re...
Page 16 - USB
10 Indicates voice recording mode.Indicates audio recording mode.Indicates FM mode.Indicates setup mode.Indicates battery status.Indicates keys are locked.Indicates player is connected to a PC with the USB port. Icon Description USB
Page 17 - Getting Started; Charging the battery; Follow these steps to charge the Joybee 200’s battery.
11 Getting Started Charging the battery Follow these steps to charge the Joybee 200’s battery. 1. Remove the translucent rubber cover from the charger socket. Insert one end of the power adapter cable into the USB port of the Joybee 200 and the other end to the adapter. 2. Connect the adapter to a w...
Page 19 - Connecting earphones and wired remote control
13 Connecting earphones and wired remote control Follow these steps to connect earphones and wired remote control. • Plug the earphones into the earphone jack on thewired remote control as shown in the illustration. • To connect both the wired remote control as well asthe earphones, connect the wire...
Page 20 - Connecting the Joybee 200 to a PC
14 Connecting the Joybee 200 to a PC Connect the Joybee 200 to your PC with the USB cable provided as shown in the illustration. When the Joybee 200 is successfully connected to the PC, a new Removable Disk icon appears in the My Computer window on your PC. A message saying Connection Com-pleted alo...
Page 21 - Disconnecting the Joybee 200 from a PC
15 Disconnecting the Joybee 200 from a PC Follow these steps to disconnect the Joybee 200 from a PC. 1. Double click the USB device icon on the taskbar. A dialog box as shown below appears on the screen. 2. Select USB Mass Storage Device in the dialog box and press Stop. Another dialog box appears o...
Page 22 - When the following dialog box appears on the
16 4. When the following dialog box appears on the screen, press OK and disconnect the Joybee 200 from the PC. The procedure described here may differ for the different operating sys- tems.
Page 23 - Installing the software
17 Installing the software Insert the software CD provided with the Joybee 200 in the CD-ROM drive on your PC. The following installation menu is displayed on the PC screen. If the installation menu does not appear on your PC screen, open Explorer in Windows and locate the ‘autorun.exe’ file on the ...
Page 24 - Install Direct X 8 QMusic requires Direct X to be installed on your
18 Click to select and install the desired software. Follow the instructions on the screen to complete the installation. The following table shows the contents and functions of the software suite on the CD. Item Description Install BenQ QMusic QMusic is an easy-to-use file manager that allows you to...
Page 25 - Installing the USB driver; Installing in Windows ME/Windows 2000/Windows XP
19 Installing the USB driver Installing in Windows ME/Windows 2000/Windows XP Follow these instructions to install a USB driver. 1. Turn on the BenQ Joybee 200 MP3 Player. 2. Connect the Joybee 200 to the USB port of your computer using the USB cable provided. 3. A New Hardware Found message appears...
Page 26 - Turning the Joybee 200 on and off; Follow these steps to turn the Joybee 200 on or off.
20 Using the BenQ Joybee 200 MP3 Player Turning the Joybee 200 on and off Follow these steps to turn the Joybee 200 on or off. • Press and hold the power button for 2 seconds to turn on the Joybee 200. After the welcome note is displayed, the Joybee 200 enters whatever mode the player was in when it...
Page 27 - Transferring data to the Joybee 200; Transferring data with Windows Explorer; Connect Joybee 200 to a PC with the USB cable as; Transferring files with QMusic
21 Transferring data to the Joybee 200 You can transfer music files to the Joybee 200 using Win-dows Explorer or the QMusic software provided. QMusic also enables you to convert your audio CDs to MP3 files and copy them to the player. Transferring data with Windows Explorer Follow these steps to tra...
Page 28 - Playing MP3/WMA music files; or
22 Playing MP3/WMA music files Use the following procedure to quickly start listening to your favorite music on the BenQ Joybee 200 MP3 Player. 1. Turn on the Joybee 200. 2. Press the MODE button repeatedly to switch to MP3 mode. 3. Press the key to play the current track. 4. Use the or keys to skip...
Page 29 - Repeat play; Repeat; One
23 Repeat play You can use the repeat function to play a selected track, section, all files or a random file repeatedly. 1. Press and hold the MODE button for two seconds while a track is playing to display a popup menu. 2. Use the or keys to select the REPEAT option. 3. Press the key to confirm you...
Page 30 - Selecting an EQ mode; Selecting a playback speed; Press and hold the MODE; Bass; Speed
24 Selecting an EQ mode The Joybee 200 provides seven equalizer modes to enhance the quality of audio. Select the EQ mode as described in the following procedure. 1. Press and hold the MODE button for two seconds while a track is playing to display a popup menu. 2. Use the or keys to select the EQ o...
Page 31 - Listening to FM radio; Press the MODE button
25 Listening to FM radio The radio mode of the Joybee 200 enables you to listen to FM radio as follows. 1. Turn on the Joybee 200. 2. Press the MODE button repeatedly to switch to FM mode. 3. Choose an FM frequency using one of the following procedures. • Use the or keys to scan to the previous or n...
Page 32 - Saving preset channels in memory; When listening to your; Recording FM radio; When listening to your favorite channel, press the
26 Saving preset channels in memory Follow these steps to save your favorite radio stations for quick access. 1. When listening to your favorite channel, press and hold the MODE key for 2 seconds to display a pop-up menu. 2. Use the or keys to choose a channel number (1-32). 3. Press the key to conf...
Page 33 - Using the recorder function; Press the key to start recording and speak into the
27 equalizer functions are also available when you play back a recorded program. Refer to "Repeat play" on page 23, "Selecting an EQ mode" on page 24, and "Selecting a playback speed" on page 24 for more details. Using the recorder function The Joybee 200 has a recording func...
Page 34 - Playing back recorded audio files
28 Playing back recorded audio files Voice mode enables you to play back your recorded (FM, MIC or LINEIN) files. The recorded files are saved as MP3s with the filename indicating the source of the recording, the date and the order in which they were recorded. Follow these steps to play back your re...
Page 35 - System setup; Deleting files from the Joybee 200; Delete; Voice File; Yes
29 System setup Deleting files from the Joybee 200 Follow these instructions to delete any files from your Joybee 200. 1. Turn on the Joybee 200. 2. Press the MODE button repeatedly to switch to SETUP mode. 3. Use the or keys to select the desired option as follows: • Music File: deletes the selecte...
Page 36 - Setting the recording options; REC Setting; Quality; TVF
30 7. Press to confirm your selection. 8. Press the MODE key to exit from the setup menu. You can also use QMusic or Windows Explorer to delete files on the Joybee 200. Setting the recording options You can set the recording quality when recording from FM radio, the internal microphone, or an extern...
Page 37 - to; Press the MODE button; Source; MIC in
31 7. Press to confirm your selection. To specify the default source signal when recording voice files, do the following: 1. Turn on the Joybee 200. 2. Press the MODE button repeatedly to switch to SETUP mode. 3. Use the or keys to highlight REC Setting from the menu and press the key to confirm you...
Page 38 - Press the MODE button repeatedly to switch to; VOR; Off
32 The Joybee 200 has the VOR feature that only records when a voice signal is detected and stops recording if there is no voice or audio signal. This prevents blank spaces in your recorded files. To enable the VOR feature, do the fol-lowing: 1. Turn on the Joybee 200. 2. Press the MODE button repea...
Page 39 - Setting up a timer recording; REC Program; Mic; From
33 Setting up a timer recording The Joybee 200 can be programmed to start recording automatically at a specified time, from a specified input source. To set up a timer recording, do the following: 1. Turn on the Joybee 200. 2. Press the MODE button repeatedly to switch to SETUP mode. 3. Use the or k...
Page 40 - Setting the power save option; To; Power Save
34 10. Use the or keys to set the date and time when the recording ends. Set the date (year, month, date) and the time (hours and minutes) using the or keys and press after each option to move to the next. 11. Press to confirm your selection. Setting the power save option The Joybee 200 has a power ...
Page 41 - to confirm your; Using the lyric sync function; Lyric Sync
35 6. Press to confirm your selection. Using the lyric sync function The Joybee 200 has a special feature that enables you to know the view the lyrics on the display when playing back music. The Lyrics editing tool in QMusic enables you to create the lyrics and you can enable the lyrics sync feature...
Page 42 - Using the play list function; Play List
36 Using the play list function The Joybee 200 provides a play list feature that helps you create play lists of your favorite songs. Create play lists using QMusic and play them on your Joybee 200 by acti-vating the play list feature as follows: 1. Turn on the Joybee 200. 2. Press the MODE button re...
Page 43 - Setting the date and time; Follow these steps to set the date and the time:; key to confirm your; Language
37 Setting the date and time Follow these steps to set the date and the time: 1. Turn on the Joybee 200. 2. Press the MODE button repeatedly to switch to SETUP mode. 3. Use the or keys to select the Date - Time option. 4. Press to confirm your selection. 5. Use the or keys to set the year, month, da...
Page 44 - Setting the language; Follow these steps to set the language:; English
38 Setting the language Follow these steps to set the language: 1. Turn on the Joybee 200. 2. Press the MODE button repeatedly to switch to SETUP mode. 3. Use the or keys to select the Language option. 4. Press the key to con- firm your selection. 5. Use the or keys to select the desired language fr...
Page 45 - Formatting the Joybee 200; Format; Quick
39 Formatting the Joybee 200 Follow these steps to format the Joybee 200 and delete all its contents: 1. Turn on the Joybee 200 2. Press the MODE button repeatedly to switch to SETUP mode. 3. Use the or keys to select the Format option. 4. Press to confirm your selection. 5. Use the or keys to selec...
Page 46 - Upgrading the firmware; Sys Upgrade
40 Upgrading the firmware Follow these steps to upgrade the firmware of the Joybee 200: 1. Turn on the Joybee 200 2. Press the MODE button repeatedly to switch to SETUP mode. 3. Use the or keys to select the Sys Upgrade option. 4. Press to confirm your selection. 5. You will be prompted to connect t...
Page 47 - Viewing system information; System Info
41 Viewing system information To view information about the system such as details about memory usage, number of music and voice files, and the version number of the firmware, do the following: 1. Turn on the Joybee 200. 2. Press the MODE button repeatedly to switch to SETUP mode. A menu is displaye...
Page 48 - Using QMusic
42 Using QMusic QMusic is software provided to help you to organize your music collection. You can use it to play audio CDs or MP3s on your PC, convert audio CD tracks into MP3 format, create playlists, transfer music to your Joybee 200, burn music CDs and create your own music album. The QMusic ico...
Page 49 - Overview of QMusic
43 Overview of QMusic The user interface of the QMusic program is shown in the illustration below. Action buttons Left panel Display Right pane Feature buttons Search window System buttons Playback buttons Status bar
Page 50 - Action buttons
44 Features Description Action buttons Provides specific QMusic functions.Left button: Convert CD audio tracks to MP3 formats.Right button: Add audio files saved in your PC to either Music Library or MP3 folder under Joybee 200. Left panel Displays all files supported by QMusic. There are two defaul...
Page 53 - Adding music to the Joybee 200 using QMusic; appears in the left panel of the
47 Adding music to the Joybee 200 using QMusic Connect the Joybee 200 to the PC using the procedure described in "Connecting the Joybee 200 to a PC" on page 14. The icon appears in the left panel of the QMusic interface, and the directories on the Joybee 200 are displayed under the icon. You...
Page 54 - Adding music from an audio CD to Joybee 200; icon appears in the left panel of QMusic,
48 Adding music from an audio CD to Joybee 200 1. Put an audio CD in the CD-ROM on your PC. The icon appears in the left panel of QMusic, and the files on the CD appear in the right panel. 2. Select the files to be added to the Joybee 200 by clicking the check boxes in front of the files.
Page 56 - Select the files to be added to the Joybee 200. To
50 5. Select the files to be added to the Joybee 200. To select more than one file, press and hold the Ctrl key on the keyboard while selecting the files. To select all files, click the first file, press and hold the Shift key on the keyboard, and then click the last file. If you want to delete file...
Page 58 - Adding files from a PC to Joybee 200; Click the My Joybee folder in the left panel.
52 Adding files from a PC to Joybee 200 Follow these steps to add files from a PC to your Joybee 200. 1. Click the My Joybee folder in the left panel.
Page 60 - and QMusic starts transferring the files
54 4. Press and QMusic starts transferring the files in the My Joybee folder to the Joybee 200. Before transferring the selected files to Joybee 200, QMusic shows a dialog box to ask if you want to delete the existing files in the My Joybee folder. If you want to keep them, abort the transfer and ba...
Page 61 - Updating Joybee 200 automatically with QMusic
55 Updating Joybee 200 automatically with QMusic You can set up the Joybee 200 to be updated with the music from the My Joybee folder automatically when it is connected to the PC. 1. Click the My Joybee folder in the left panel.
Page 64 - Deleting files using QMusic
58 Update Settings. Click the button to save your settings. 6. Connect the Joybee 200 to the PC and QMusic auto- matically updates the files on Joybee 200 with the files in My Joybee folder. From now on, if you want to automatically update files on Joybee 200, you only need to save files in the My J...
Page 67 - Troubleshooting; Unable to transfer files to Joybee 200.
61 Troubleshooting Unable to transfer files to Joybee 200. Check the following: • The USB cable has been securely connected to thePC and Joybee 200, and the Joybee 200 is turned on. • The USB driver has been installed on your PC. • The battery on Joybee 200 is charged. Data stored in Joybee 200 is l...
Page 68 - Service Information
62 Service Information If you cannot solve the problems encountered while using the Joybee 200 with the troubleshooting guide, please con-tact our worldwide service locations to obtain the latest drivers and online support services. Region Country or City Telephone Number E-mail Address Asia China +...
