Page 2 - TABLE OF CONTENTS; Navigating the Miracast Adapter’s Home Screen
TABLE OF CONTENTS Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Placement for Optimal Performance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...
Page 3 - Your Belkin Home Network will allow you to:
1 INTRODUCTION Thank you for purchasing the Belkin Miracast Video Adapter. Now you can take advantage of this great new technology that lets you watch anything and ever ything from your mobile device or computer on your big, beautiful, HDTV screen. Benefits of the Miracast Video Adapter Your Belkin ...
Page 5 - INTRODUCTION; . Cordless Phone Placement
3 INTRODUCTION 1 . Placement of your Wireless Router (or Access Point) Your wireless router may cause interference with the Miracast Video Adapter, especially if it is a dual-band router. For optimal performance of the Miracast Adapter, if possible, tr y to place it away from your home Wi-Fi ® netwo...
Page 8 - OVERVIEW; LED Behavior; Status LED Behavior
6 OVERVIEW LED Behavior What’s on the TV Screen Indicates Blinking Green Loading screen Adapter is starting up Steady Green Instructions to pair device Ready to pair with a smart device Blinking Green with pause after 2nd blink Instructions to press button Waiting for user to press Multipurpose butt...
Page 9 - Adapter State
7 OVERVIEW Multipurpose Button The only button on the Miracast Video Adapter can be used for a variety of purposes. Please consult the table below for each application: Adapter State Action Duration of Action Result Adapter is unpowered (then powered on) Press and hold button Until Firmware Update p...
Page 11 - Or; INSTALLING AND SETTING UP THE ADAPTER
9 1. Turn your TV on and power up the Miracast Video Adapter by connecting the USB cable from the Adapter to a USB port on your TV or other USB power source that provides at least 5V, 500mA of power. Or INSTALLING AND SETTING UP THE ADAPTER
Page 12 - Note: HDMI port 1 is recommended to ensure your TV’s
10 INSTALLING AND SETTING UP THE ADAPTER 3. Set your TV’s source/input selector to the HDMI port you used to connect the Miracast Adapter in step 2. 2. Connect the Miracast Video Adapter directly into an HDMI port on your TV. If the Adapter can’t fit into the port due to its size, tr y using the HDM...
Page 13 - Note: Miracast may be called Wireless Display,
11 INSTALLING AND SETTING UP THE ADAPTER 5. On your smart device, go to the settings, then Wireless & Networks and find Miracast. If it isn’t already, activate Miracast on your smart device. Note: Miracast may be called Wireless Display, Screen Mirroring, AllShare Cast, or something else dependi...
Page 14 - Motorola
12 INSTALLING AND SETTING UP THE ADAPTER Motorola a. Access your phone’s apps by clicking the icon indicated in the image below. b. Scroll through your phone’s applications and select Settings. c. In your phone’s settings, select the Display option.
Page 15 - d. Select Wireless display from the list of options.
13 INSTALLING AND SETTING UP THE ADAPTER d. Select Wireless display from the list of options. e. Turn Wireless Display to ON and select the adapter to which you wish to connect.
Page 16 - Samsung Galaxy
14 INSTALLING AND SETTING UP THE ADAPTER Samsung Galaxy a. Access the drop-down menu by swiping your finger from the top of your phone’s screen to the bottom. b. Select AllShare Cast or Screen Mirroring from the menu at the top. LG Miracast-enabled devices a. Go to Settings.
Page 17 - b. Select “More...” from the list of options under Wireless & Networks.
15 INSTALLING AND SETTING UP THE ADAPTER b. Select “More…” from the list of options under Wireless & Networks. c. Select “Miracast ” from the selection.
Page 18 - a. Access the drop-down menu by swiping your finger from
16 INSTALLING AND SETTING UP THE ADAPTER Google Nexus 4 (Standard Android UI) a. Access the drop-down menu by swiping your finger from the top of your phone’s screen to the bottom and tap the icon in the top right corner of the drop-down menu. b. Tap the “ Wireless Display” option.
Page 19 - select the TV that the Miracast Video Adapter is connected to.
17 INSTALLING AND SETTING UP THE ADAPTER 6. In the list of available devices now displayed on your smart device, select the TV that the Miracast Video Adapter is connected to. 7. If prompted to, please press the button on the Miracast Video Adapter or if requested, enter the PIN code that appears on...
Page 20 - If the image on your smart device is now being
18 INSTALLING AND SETTING UP THE ADAPTER The Miracast Adapter will attempt to pair with your device at this point. 8. If the image on your smart device is now being mirrored onto your TV, you are done!
Page 21 - Note: LG SimpLink is not compatible with HDMI-CEC
19 INSTALLING AND SETTING UP THE ADAPTER Navigating the Miracast Adapter’s Home Screen with your Remote The Miracast Video Adapter’s home screen may be able to be navigated using your TV’s remote control. In order to use your TV’s remote control, both the TV and the remote must be compatible with HD...
Page 23 - MIRACAST VIDEO ADAPTER’S INTERFACES; Miracast Settings Screen
21 MIRACAST VIDEO ADAPTER’S INTERFACES Miracast Settings Screen 2. Enable Non-Compliant HDCP If you’ve made a Miracast connection and your smart device’s screen content doesn’t show up on the TV using HDCP settings, turning Enable Non-Compliant HDCP on may solve the issue (depending on your type of ...
Page 25 - Once the Firmware Update page appears, use a laptop or desktop
23 MIRACAST VIDEO ADAPTER’S INTERFACES 4. Once the Firmware Update page appears, use a laptop or desktop with Wi-Fi and connect to a network called ”Wi-Fi-Video-Receiver.” 5. Using a browser, navigate to http://192.168.16.1
Page 26 - You will be prompted to enter a Username and Password the
24 MIRACAST VIDEO ADAPTER’S INTERFACES 6. You will be prompted to enter a Username and Password; the Username is “admin” and the password is also “admin.”
Page 27 - Firmware Upgrade
25 MIRACAST VIDEO ADAPTER’S INTERFACES System Info This screen will list the technical information related to your Miracast Adapter. Information listed here includes: Hardware Version, Firmware Version, SSID, Hardware Address, Discover y Channel, and Operating Channel. Firmware Upgrade To update the...
Page 28 - Once the Firmware Update page appears on the TV, use
26 MIRACAST VIDEO ADAPTER’S INTERFACES 5. Once the Firmware Update page appears on the TV, use a laptop or desktop computer with Wi-Fi and connect to a network called “ Wi-Fi-Video-Receiver.” 6. Using a browser, navigate to http://192.168.16.1
Page 29 - You will be prompted to enter a Username and Password the
27 MIRACAST VIDEO ADAPTER’S INTERFACES 7. You will be prompted to enter a Username and Password; the Username is “admin” and the password is also “admin.” 8. The User Interface should appear in the navigation menu on the left side. Click on the link to Firmware Upgrade.
Page 31 - Once the progress bar is filled, you will need to go back
29 MIRACAST VIDEO ADAPTER’S INTERFACES 12. Once the progress bar is filled, you will need to go back to your computer and press the Reboot button. 13. After pushing the reboot button, a screen will appear indicating that the firmware update is in progress. Do not power off your TV or the Adapter at ...
Page 32 - Channel Selection Priority
30 MIRACAST VIDEO ADAPTER’S INTERFACES 14. Once the Miracast Adapter reboots for the final time, you will be back at the main screen. Channel Selection Priority To improve your Miracast Video Adapter’s performance in some environments, you have the choice of allowing your smartphone to choose which ...
Page 33 - TROUBLESHOOTING
31 TROUBLESHOOTING The Adapter won’t fit in my TV due to insufficient room . Due to the dimensions of the Miracast Video Adapter, some customers may have difficulty plugging the Video Adapter into an open HDMI port due to the design of the TV or because it has been mounted to a wall. To resolve this...
Page 34 - Video is not displaying correctly on the screen/no display .
32 TROUBLESHOOTING Video is not displaying correctly on the screen/no display . If your device is not mirroring onto your TV properly or there is no display at all, it could either be caused by interference or because the HDCP settings on the Adapter are incorrect for your specific smart device. Tr ...
Page 36 - INFORMATION
34 FCC Statement DECLARATION OF CONFORMIT Y WITH FCC RULES FOR ELECTROMAGNETIC COMPATIBILIT Y We, Belkin International, Inc., of 12045 E. Waterfront Drive, Playa Vista, CA 90094, declare under our sole responsibility that the product, F7D7501v1, to which this declaration relates, complies with Part ...
Page 37 - What this warranty covers .
35 INFORMATION Belkin International, Inc ., Limited 2-Year Product Warranty What this warranty covers . Belkin International, Inc. (“Belkin”) warrants to the original purchaser of this Belkin product that the product shall be free of defects in design, assembly, material, or workmanship. What the pe...
