Page 2 - TABLE OF CONTENTS; Overview
TABLE OF CONTENTS Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 Overview Feature Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2Equipment Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4Operating Syste...
Page 3 - INTRODUCTION
INTRODUCTION 1 Congratulations on your purchase of the Belkin OmniView SOHO Series KVMSwitch with Audio (the KVM Switch). Our diverse line of quality KVMsolutions exemplifies the Belkin commitment to delivering high-quality,durable products at a competitive price. Engineered to give you control over...
Page 4 - Feature Overview; USB Hot Keys; OVERVIEW
Feature Overview The OmniView SOHO Series KVM Switch with Audio (the KVM Switch)allows you to control up to four computers, with one USB keyboard andUSB mouse and a DVI-D video monitor. USB Hot Keys Hot keys allow you to select ports using designated key commands fromyour USB keyboard. Control up to...
Page 5 - Direct-Access Port Selectors
3 OVERVIEW Direct-Access Port Selectors Direct-access port selectors, conveniently located on the front face of theKVM Switch, allow for simple, manual port selection. Cable Management The designed enclosure offers built-in cable management to containconnected cables. Once the cables have been conne...
Page 6 - Equipment Requirements; Cables
OVERVIEW 4 Equipment Requirements Cables For each USB computer to be connected to the KVM Switch, one DVIcable and one USB cable is necessary. To support resolutions of up to 1600x1200@60Hz, use Belkin KVM Cablesfor SOHO Series with Audio (Belkin part number F1D9201-XX) to preservesignal integrity. ...
Page 7 - Operating Systems; Your KVM Switch is for use on CPUs using:; Unit Display Diagrams
OVERVIEW 5 Operating Systems Your KVM Switch is for use on CPUs using: Platforms • Windows ® 98/2000/Me/XP, Mac ® OS*, Linux ® * *with USB support Keyboards • Supports 101-/102-/104-/107-key USB keyboards Mice • USB-compatible USB mice with 2, 3, 4, or 5 buttons Monitors • DVI-D• VGA (with DVI to DB...
Page 8 - The back of the KVM Switch:
OVERVIEW 6 Console USB keyboard RJ45 flash port Console USB mouse 1st computerUSB port—USB 1 2nd computerUSB port—USB 2 2nd computerDVI port—DVI 2 2nd computeraudio/microphone jacks 1st computeraudio/microphone jacks Consoleaudio/microphonejacks 1st computerDVI port–DVI 1 Console DVI port USB device...
Page 9 - Where to Place the KVM Switch
OVERVIEW 7 Where to Place the KVM Switch The compact size of the KVM Switch makes it perfect for desktopplacement. Consider the following when deciding where to place the KVMSwitch: whether or not you intend to use the direct-access port selectors;the length of the cables attached to your keyboard, ...
Page 10 - Specifications
OVERVIEW 8 Specifications Part No.: F1DD102U, F1DD104U Power: 9V DC, 1A power adapter (required) PCs Supported: 2 (F1DD102U), 4 (F1DD104U) Monitor Supported: VGA and SVGA MultiSync, LCD (with DVI to VGA Adapter), DVI-D monitors Max Resolution: 1600x1200@60Hz Keyboard Input: USB Mouse Input: USB USB ...
Page 11 - Installing the KVM Switch Base; Hold the main housing with one hand and the base with the other.
STEP-BY-STEP INSTALLATION GUIDE 9 This section provides complete instructions for the hardware setup of asingle KVM Switch. (F1DD102U, F1DD104U) Installing the KVM Switch Base Hold the main housing with one hand and the base with the other. With the narrow part of the base facing toward the rear of ...
Page 12 - Installing the HID USB Driver; On some computers, you must enable USB support on your system
10 STEP-BY-STEP INSTALLATION GUIDE Installing the HID USB Driver Note: On some computers, you must enable USB support on your system BIOS. Please reference your computer manufacturer’s manual ormotherboard manual to verify that USB support is enabled. 1. Connect the 9V, 1A power adapter to the KVM S...
Page 13 - Connecting the Console
11 STEP-BY-STEP INSTALLATION GUIDE Connecting the Console 1. Power down your computers. 2. Remove the rear panel of the KVM Switch to expose the ports. 3. Connect the USB keyboard to the designated USB port with the keyboard symbolon the KVM Switch. Note: You must connect the USB keyboard to the des...
Page 15 - Connecting the PCs; Take the DVI cable and connect the male end of the cable to the DVI
STEP-BY-STEP INSTALLATION GUIDE 13 Connecting the PCs 1. Using your Belkin KVM Cables for SOHO Series with Audio (Belkin part number F1D9201-XX), connect the USB cable from your computer’sUSB port to the USB port on the KVM Switch. 2. Take the DVI cable and connect the male end of the cable to the D...
Page 16 - Powering Up the Systems
STEP-BY-STEP INSTALLATION GUIDE 14 3. Using the audio cable, connect one end of the male 3.5mm plug to the “Speaker Out” jack of your sound card or computer, and connectthe other end of the “audio” jack to your KVM Switch. 4. Using a second audio cable, connect one end of the male 3.5mm plug to the ...
Page 17 - USING YOUR KVM SWITCH; Selecting a Computer Using Direct-Access Port Selectors; You must connect the USB keyboard to the designated USB
USING YOUR KVM SWITCH 15 You can select which computer to operate by either the direct-access portselector located on the front panel of the KVM Switch or throughkeyboard hot key commands. Note that it will take 1–2 seconds for thevideo to display after switching. This is due to the refresh rate of ...
Page 18 - AutoScan Mode; To disable AutoScan mode, press the space bar.; Connecting USB Devices to the Built-In 2-Port Hub
USING YOUR KVM SWITCH 16 AutoScan Mode In AutoScan mode the KVM Switch remains on one port for 10 secondsbefore switching to the next. This time interval cannot be changed.To enable AutoScan mode press [SCROLL LOCK], [SCROLL LOCK], [0], [0] Note: There is no mouse or keyboard control in this mode. T...
Page 19 - BELKIN KVM SWITCHES AND ACCESSORIES; OmniView SOHO Series with Audio
BELKIN KVM SWITCHES AND ACCESSORIES 17 OmniView KVM SwitchesOmniView E Series These KVM devices allow you to control two or four computers from oneconsole and make switching between computers more convenient.Designed for compatibility with your PS/2 platform, they reduce desktopclutter and provide a...
Page 20 - OmniView PRO2 Series with On-Screen Display
BELKIN KVM SWITCHES AND ACCESSORIES 18 OmniView PRO2 Series with On-Screen Display OmniView PRO2 Series KVM Switches deliver reliability, performance, andcentralized control necessary for today’s enterprise environment. Thisseries of KVM Switches enables you to control multiple platform serversfrom ...
Page 21 - OmniView KVM Cables
BELKIN KVM SWITCHES AND ACCESSORIES 19 OmniView KVM Cables OmniView KVM Cables provide you with the quality connections necessaryto set up your KVM solution. Each kit provides the proper cables andconnectors to complete the installation of a Belkin OmniView KVMSwitch. OmniView KVM Cables feature stu...
Page 22 - OmniView PRO Series Plus All-In-One KVM Cables
BELKIN KVM SWITCHES AND ACCESSORIES OmniView PRO Series Plus All-In-One KVM Cables Belkin PRO Series Plus Cables allow you to easily connect all yourcomputers and servers to your OmniView KVM Switches, and are moldedtogether for better cable management.• All-In-One molded design for cable management...
Page 23 - OmniView Gold Series All-In-One KVM Cables
BELKIN KVM SWITCHES AND ACCESSORIES 21 OmniView Gold Series All-In-One KVM Cables Belkin Gold Series Cables offer the highest-possible cable performance,providing maximum conductivity and error-free data transmission. Thesecables allow you to easily connect all your computers and servers to yourOmni...
Page 25 - FAQs
FAQs 23 Q: Which operating systems does the KVM Switch support? A: The KVM Switch will support any operating system that runs in a USBplatform. Operating systems include, but are not limited to, Windows98/2000/Me/XP, Linux, and Mac OS. Q: What does flash-upgradeable mean? A: With flash-upgrade capab...
Page 27 - TROUBLESHOOTING; GENERAL; I am getting ghosting, shadowing, or fuzzy images on my monitor.
TROUBLESHOOTING 25 GENERAL My computer does not boot up when connected to the KVM Switch butworks fine when I connect the USB keyboard, video, and USB mousedirectly to the computer. • Make sure that the USB cable is properly connected between the KVM Switch and the computer. • Make sure that the USB...
Page 28 - KEYBOARD; There is a loud, long beep coming from the KVM Switch.
TROUBLESHOOTING 26 KEYBOARD The computer does not detect a keyboard and I get a keyboard errorreported at boot up. • Activate USB support on boot up on the BIOS. • Try using a different keyboard. • Try connecting the computer to a different port on the KVM Switch. • Try connecting the USB cable to a...
Page 29 - MOUSE; The mouse is lost when I switch to a different port.
TROUBLESHOOTING 27 MOUSE The mouse is lost when I switch to a different port. • Check that the USB mouse you are using is connected properly to the Console of the KVM Switch. • Disconnect and reconnect the USB cable attached to the channel with which you are experiencing problems to re-synchronize t...
