BEHRINGER PS400 - Manual

BEHRINGER PS400

BEHRINGER PS400 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
Page: / 2
Loading the manual

BEHRINGER MICROPOWER PS400

WELCOME TO BEHRINGER

Thank you for showing your confidence in us by purchasing the
BEHRINGER MICROPOWER PS400. Use this ultra-compact phantom
power supply with mixers and microphone preamplifiers that do not
include phantom power sources. The PS400:

V

supplies phantom power (+12 V or +48 V) to any type of
condenser microphone

V

routes the microphone signal to a mixer or
a microphone preamplifier

Please read the safety instructions that appear at the
end of this document.

CONNECTORS AND CONTROL ELEMENTS

This section illustrates and describes each PS400 connector and
control element.

1

3

4

5

2

Fig. 1: PS400 connectors and control elements

12 V

connector:

To connect the power supply unit to the PS400, use the
12 V connector. Connecting the power supply unit to the
mains automatically switches the PS400 on. To disconnect
the unit from the mains, pull out the main cord plug.

ON LED:

As soon as the unit is connected to the mains, the ON LED is
i l l u m i n a t e d .

MIC INPUT connector:
To send a microphone signal to the PS400, you need an
audio cable that includes XLR connectors. Plug:

V

one XLR connector into the MIC INPUT connector

V

the other XLR connector into the condenser microphone

MIC THRU connector:
To route the microphone signal from the PS400 to a mixer
or a microphone preamplifier, you need an audio cable that
includes XLR connectors.
P l u g :

V

one XLR connector into the MIC THRU connector

V

the other XLR connector into the mic input of a mixer or,
alternatively a microphone preamplifier

+12 V / +48 V PHANTOM VOLTAGE switch:
To select the voltage that you need, push this switch toward
+12 V or, alternatively +48 V. For details about what value
to use, refer to instructions from the microphone
manufacturer.

SERIAL NUMBER: To register the unit, use the serial number that is
located on the bottom of the PS400.

SETUP EXAMPLE

The following is an example of how to set up the PS400:

PROMIXER DJX700

MICROPOWER PS400

STUDIO CONDENSER

MICROPHONE C-1

MIC INPUT

MIC THRU

Fig. 2: PS400 setup example

WARRANTY

F o r o u r c u r r e n t w a r r a n t y t e r m s , p l e a s e r e f e r t o o u r w e b s i t e a t
http://www.behringer.com.

Other language versions of this documentation...

Die deutsche Anleitung ist erhältlich @ www.behringer.com
Manuel francophone en téléchargement sur www.behringer.com
Manual en español disponible en www.behringer.com
Manuali italiani disponibili @ www.behringer.com

Русскоязычное руководство @ www.behringer.com

Polska instrukcja dostępna jest pod adresem @ www.behringer.com

Nederlandse handleiding beschikbaar @ www.behringer.com
Suomenkielinen käyttöohje saatavilla osoitteesta www.behringer.com
Svensk manual finns tillgänglig på www.behringer.com
Dansk vejledning findes på @ www.behringer.com
Manual português disponível @ www.behringer.com

Åëëçíéêü åã÷åéñßäéï õðÜñ÷åé äéáèÝóéìï óôç äéåýèõíóç www.behringer.com

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Other BEHRINGER Models

All BEHRINGER Other