BEHRINGER OD300 - Manual
BEHRINGER OD300 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
OVERDRIVE DISTORTION OD300
Thank you for showing your confidence in us by purchasing the BEHRINGER
OVERDRIVE DISTORTION OD300. This effects pedal is ideally suited for electric guitars.
Thanks to its high-performance features you can create state-of-the-art overdrive,
distortion or a combination of both effects.
1. CONTROLS
Top view
The
LEVEL
control adjusts the output level.
The
TONE
control allows you to shape your overall sound.
The
DRIVE
control adjusts the intensity of the overdrive/distortion effect.
Use the
MODE
control to adjust the balance between overdrive and distortion
effect. In leftmost position you got pure overdrive effect and in the rightmost
position you get pure distortion.
The
ON/BATT
LED illuminates when the effect is activated. It also serves as a
battery level indicator.
Use the footswitch to activate/deactivate the effect.
Use this 1/4" TS
IN
connector to plug in the instrument cable.
The 1/4" TS
OUT
connector sends the signal to your amp.
Use the
DC IN
connection at the front of the unit to plug in a 9 V power supply (not included).
The
BATTERY COMPARTMENT
is located underneath the pedal cover. To install or
replace the 9 V battery, press the hinges with a ballpen and remove the pedal cover. Be
careful not to scratch the unit.
+
The OD300 has no on/off switch. As soon as you insert the jack into the
IN connector, the OD300 begins running. When not using the OD300,
remove the jack from the IN connector. This extends the life of the
battery.
The
SERIAL NUMBER
is located at the bottom.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
