BEHRINGER FX600 - Manual

DIGITAL MULTI-FX FX600

Thank you for showing your confidence in us by purchasing the BEHRINGER DIGITAL MULTI-FX FX600.

This ultimate digital multi-effects pedal delivers 24-bit high-resolution stereo effects including Flanger,

Chorus, Phaser, Delay, Tremolo and Pitch Shifter. Thanks to its extensive tone control plus additional multi-

functional parameter adjustment you’ll have plenty of cool sounds at your disposal to handle every situation.

1. CONTROLS

Top view

The

LEVEL

control adjusts the output level.

and

The

PAR 1 and 2

controls have different functions depending on the chosen effect.

);

)XQFWLRQ3$ 5FRQWURO

)XQFWLRQ3$5FRQWURO

Chorus

Effects speed

Effects depth

Flanger

Effects speed

Effects depth

Phaser

Effects speed

Effects depth

Delay

Delay time

Delay feedback

Tremolo

Effects speed

Shape (LFO waveform)

Pitch Shifter

Detune (slight shifting for fatter sound)

Semi tone (pitch interval)

The

FX

control lets you chose between six different modulation effects:

CHORUS:

This effect slightly detunes the original signal. A very pleasant detune effect is created

in connection with the pitch variation.

FLANGER:

Originally, the flanger effect was generated with two tape recorders running synchronously.

The same audio signal was recorded on both machines. If you put a finger on the left spool of one of

the machines, the spool and the playback speed are slowed down. The generated delay results in

phase shifting of the signals.

PHASER:

With the phaser, a second, phase-shifted signal is added to the original audio signal. The

resulting sound is thicker and above all livelier.

PITCH SHIFTER:

The pitch shifter slightly detunes the audio signal.

TREMOLO:

The tremolo effect is achieved by periodic modulation of the input signal level. This

results in a continuous change from low to high level that lends a quivering, tremulous sound character.

DELAY:

A delay of the input signal with various repetitions.

The

ON/BATT

LED illuminates when the effect is activated. It also serves as a battery level indicator.

Use the footswitch to activate/deactivate the effect.

Use the two 1/4" TS connectors

IN A

and

IN B

to plug in a stereo input signal. For mono use

just plug in IN A.
The two 1/4" TS connectors

OUT A

and

OUT B

send the signal to your amp. Use both connectors

if you want to achieve full stereo effect. For mono use just plug in OUT A.

Use the

DC IN

connection at the front of the unit to plug in a 9 V power supply (not included).

The

BATTERY COMPARTMENT

is located underneath the pedal cover. To install or replace the 9 V

battery, press the hinges with a ballpen and remove the pedal cover. Be careful not to scratch the unit.