BEHRINGER BO100 - Manual
BEHRINGER BO100 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
BLUES OVERDRIVE BO100
Thank you for showing your confidence in us by purchasing the BEHRINGER BLUES
OVERDRIVE BO100. This classic effects pedal is specifically designed to deliver the
warm and emotive distortion usually known from 30-year-old classic tube amps. Thanks
to its high-performance features you will achieve the tone of a vintage and bluesy tube
amp that captures every nuance of your playing. And if you feel like it, you can rock out
with full-blast distortion.
1. CONTROLS
Top view
The
LEVEL
control adjusts the output level.
The
TONE
control adds tube-like warmth to the overall sound.
Use the
GAIN
control to adjust the amount of overdrive.
The
ON/BATT
LED illuminates when the effect is activated. It also serves as a
battery level indicator.
Use the footswitch to activate/deactivate the effect.
Use this 1/4" TS
IN
connector to plug in the instrument cable.
The 1/4" TS
OUT
connector sends the signal to your amp.
Use the
DC IN
connection to plug in a 9 V power supply (not included).
The
BATTERY COMPARTMENT
is located underneath the pedal cover. To install or
replace the 9 V battery, press the hinges with a ballpen and remove the pedal cover. Be
careful not to scratch the unit.
+
The BO100 has no on/off switch. As soon as you insert the jack into the
IN connector, the BO100 begins running. When not using the BO100,
remove the jack from the IN connector. This extends the life of the
battery.
The
SERIAL NUMBER
is located at the bottom.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
