Bard QC501 - Manual

Bard QC501

Bard QC501 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
9 Page 9
10 Page 10
11 Page 11
12 Page 12
13 Page 13
14 Page 14
15 Page 15
16 Page 16
17 Page 17
18 Page 18
19 Page 19
20 Page 20
21 Page 21
22 Page 22
23 Page 23
24 Page 24
25 Page 25
26 Page 26
27 Page 27
Page: / 27

Table of Contents:

  • Page 2 – CONTENTS
  • Page 3 – GETTING OTHER INFORMATION AND PUBLICATIONS; ACCA
  • Page 4 – QC SERIES WATER SOURCE GENERAL INFORMATION; QC MODEL NOMENCLATURE; QC 50 1 – A 10 X X X X X X; TABLE 1
  • Page 6 – FIGURE 1
  • Page 7 – SHIPPING DAMAGE; FIGURE 2; UNIT REMOVAL FROM SKID; WARNING
  • Page 8 – FIGURE 3
  • Page 11 – DUCT WORK; The QT; series unit has provision to attach a supply; series units are designed for use with free; FIGURE 7; FIGURE 8
  • Page 12 – CONDENSATE DRAIN; FIGURE 9B; NOTE: Whichever type of drain connection is used a; If the drain is to be routed through; . The drain line must be able to be removed from; FIGURE 9A; FIGURE 9C
  • Page 13 – COMMERCIAL ROOM VENTILATOR OPTION
  • Page 14 – FRESH AIR DAMPER REMOVAL
  • Page 15 – REMOVAL OF THE QTEC ENERGY RECOVERY VENTILATOR; Underneath the heat recovery cassette there is a
  • Page 16 – INSTALLATION INSTRUCTIONS; MOUNTING THE UNIT; NOTE: When a wall sleeve is to be used discard the; REMOVING LOCKING SCREWS FROM WHEELS
  • Page 18 – COMPONENT LOCATION; WIRING – MAIN POWER; “Use Copper Conductors Only”. These instructions; must be; adhered to. Refer to the National Electrical
  • Page 19 – NOTE: The voltage should be measured at the field; TABLE 3; CAUTION; FLUID CONNECTIONS
  • Page 20 – LOW VOLTAGE CONNECTIONS; “R” terminal or pin 10 of P2 is 24 VAC hot.; LOW VOLTAGE CONNECTIONS FOR
  • Page 23 – Caution: Second stage cooling must always be; START UP
  • Page 24 – TROUBLESHOOTING ECM BLOWER MOTORS
  • Page 26 – INTERNAL 2-WAY VALVE PIPING; Water Valves; Valve Location
  • Page 27 – INTERNAL 3-WAY VALVE PIPING
Loading the manual

© Copyright 2003

Manual No.:

2100-416C

Supersedes:

2100416B

File:

Vol II Tab 14

Date:

12-22-03

Bard Manufacturing Company
Bryan, Ohio 43506

Since 1914...Moving ahead, just as planned.

QC SERIES
CHILLED WATER UNIT

INSTALLATION
INSTRUCTIONS

Model:

QC501

MIS-1554

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 2 - CONTENTS

CONTENTS i Getting Other Information and Publications For more information, contact these publishers: ..... 1 QC General Information QC Model Nomenclature ......................................... 2Shipping Damage .................................................... 5Unit Removal From Skid ............

Page 3 - GETTING OTHER INFORMATION AND PUBLICATIONS; ACCA

Manual 2100-416Page 1 GETTING OTHER INFORMATION AND PUBLICATIONS These publications can help you install the airconditioner or heat pump. You can usually find these atyour local library or purchase them directly from thepublisher. Be sure to consult current edition of eachstandard. National Electric...

Page 4 - QC SERIES WATER SOURCE GENERAL INFORMATION; QC MODEL NOMENCLATURE; QC 50 1 – A 10 X X X X X X; TABLE 1

Manual 2100-416Page 2 QC SERIES WATER SOURCE GENERAL INFORMATION QC MODEL NOMENCLATURE QC 50 1 – A 10 X X X X X X TABLE 1 FACTORY BUILT-IN ELECTRIC HEAT TABLE s l e d o M A - 1 0 5 C Q 1 - V 0 4 2 1 - V 8 0 2 W K H U T B H U T B 0 . 5 0 8 3 , 6 1 0 9 2 , 2 1 0 . 0 1 0 7 6 , 2 3 0 7 5 , 4 2 0 . 5 1 0...

Other Bard Models

All Bard Other