Badger Basket 0854T - Manual
Badger Basket 0854T – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – newborn to sleep until Baby is; months; WARNING - FAILURE TO FOLLOW THESE WARNINGS
- Page 3 – Phillips Screwdriver*; USE AND CARE INSTRUCTIONS:
- Page 4 – PICTURE 1
- Page 5 – U n p a c k t h e; Machine wash; Put the SHEET onto the MATTRESS PAD (J) and place; PICTURE 3B; Raised Lip; PICTURE 5
- Page 6 – PICTURE 7; To use the bassinet as a Rocking Cradle,; Unscrew and remove all four of the; PICTURE 8; TO CONVERT THE STAND TO A TOY BOX
3.0/1108/TG
MODEL NUMBERS:
T-SERIES PORTABLE
BABY BASSINET ‘N CRADLE
WITH TOYBOX BASE
Assembly
Instructions.
Adult Assembly
Required.
Save these
instructions for
future use.
Visit us online at
www.badgerbasket.com
Toll-Free Customer Service: 1-800-236-1310 (Monday through Thursday 7:30 AM to 4:30 PM CST)
Web:
http://www.badgerbasket.com/parts •
E-mail:
Mail:
PO Box 227, Edgar, WI 54426-0227 •
Phone:
715-352-2311 •
Fax:
715-352-3163
Page 1 of 6
0850T White Batiste
0860T Sage Waffle Pleated
00750 Pink Waffle
0861T Ecru Waffle Pleated
00751 Blue Waffle
0854T Moon/Star
00752 Sage Waffle
0852T Sage Gingham
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
3.0/1108/TG BEFORE YOU BEGIN ASSEMBLY: Check all parts and hardware. If anything is missing or not satisfactory, please DO NOT call the store where purchased or return the product to them. Contact Badger Basket for assistance. Most problems are resolved without you needing to leave home. When contac...
3.0/1108/TG TOOLS NEEDED: Phillips Screwdriver* * Power screwdriver is helpful but be careful not to damage the product Page 3 of 6 PARTS INCLUDED (pictures not to scale): (A) 2 - End Panels (note inside and outside faces) (B) 4 - Rails(C) 8 - Bolts(D) 2 - Nylon Snap Straps(E) 2 - Dowels(F) 1 - Mesh...
3.0/1108/TG STEP 1: See PICTURE 1. Take ONE END PANEL (A) and attach the FOUR RAILS (B) using FOUR BOLTS(C). Attach the rails to the INSIDE FACE of the END PANEL. The inside face has countersunk areas for therails and slots that you will use later for the mesh basket. Position the bottom rails with ...
