Page 2 - TABLE OF CONTENTS
2 TABLE OF CONTENTS Safe Use Checklist ............................................................................................................................................................................................ 3 Registration ............................................................
Page 3 - MUST; SAFE USE CHECKLIST
IMPO RT ANT ! 3 Your child’s safety depends on you. No car seat can guarantee protection from injury in every situation, but proper use helps reduce the risk of serious injury or death.Even if this car seat seems easy to figure out on your own, you must follow the detailed instructions in this instr...
Page 7 - WARNING
IMPO RT ANT ! 7 • Read this Owner’s Manual completely BEFORE first use of your restraint system! • Keep instructions for future use. • Even if using this child restraint seems easy to figure out on your own, it is very important to READ, UNDERSTAND AND FOLLOW THE OWNER’S MANUAL . • Failure to comple...
Page 10 - FEATURES
10 FEATURES 1 Headrest/Harness Adjustment Lever 7 Cup Holder 2 Headrest 8 Harness Release Lever (under seat pad) 3 Head and Body Support 9 Harness Adjustment Strap 4 Harness Covers 10 Rotation Lever 5 Chest Clip 11 Seat Base 6 Buckle 12 Lower Anchor Storage 3 2 1 FEATURES 10 7 4 3 5 6 8 12 12 9
Page 13 - WITH SEAT ROTATED
13 FEATURES 4 3 1 Forward-Facing RAPIDLOCK lock-off Release Button 5 Rear-Facing Level Indicator 2 Forward-Facing RAPIDLOCK lock-off 6 Rear-Facing Shoulder Belt Guide 3 Rear-Facing RAPIDLOCK lock-off Release Button 7 Lower Anchor Storage 4 Rear-Facing RAPIDLOCK lock-off 1 2 5 5 6 6 7 WITH SEAT ROTAT...
Page 14 - CAR SEAT ROTATION
14 FEATURES The car seat can be rotated for rear-facing installtion and easy securing of your child in rear-facing mode. To rotate the car seat, squeeze the lever at the front of the car seat and rotate the seat. For rear-facing installation the car seat MUST be rotated to access rear facing belt pa...
Page 15 - The RAPIDLOCK lock-off
15 FEATURES With your child secured, rotate the seat to the rear-facing position. The seat is secure when you hear a “CLICK!” Pull on the sides of the seat to make sure it is locked. • This car seat can ONLY be rotated in rear-facing mode. DO NOT rotate the seat when securing the child in forward-fa...
Page 16 - RECLINE FOOT; FORWARD-FACING POSITION
16 FEATURES The recline foot on the bottom of the seat has two positions. The foot MUST be in the rear- facing position when the seat is being used in rear-facing mode. When the seat is being used in forward-facing mode, the foot MUST be in the forward-facing position. RECLINE FOOT REAR-FACING POSIT...
Page 18 - RAPIDLOCK
18 FEATURES This seat comes with a lock-off feature called RAPIDLOCK. The RAPIDLOCK lock-off makes tightening the seat belt or lower anchor strap quick and easy. There are two RAPIDLOCK lock-offs on this seat, one for rear-facing mode, and one for forward-facing mode. RAPIDLOCK The rear-facing RAPID...
Page 19 - Do not pull on the belt with excessive force.
19 FEATURES Remove vehicle seat belt or lower anchor strap slack. Press down firmly near the front of the base. (rear-facing installation with vehicle lap and shoulder belt shown). Do not pull on the belt with excessive force. If the belt or strap is too tight, you will not be able to close the RAPI...
Page 20 - CUP HOLDER
20 FEATURES Cup holder MUST be installed. 1. From the left side of the seat, pull the seat pad out of the lower ribs and the lower clip to fully expose the cup holder slot. 2. Align the tabs on the cup holder with the slots in the shell and insert the cup holder until you hear a “Click!” 3. To reatt...
Page 22 - INSTALL REAR-FACING WITH VEHICLE SEAT BELT
22 INSTALL REAR-FACING WITH VEHICLE SEAT BELT 2 INSTALL REAR-FACING WITH VEHICLE SEAT BELT Make sure the cup holder is installed before installing the seat in your car. See the “Features” section on page 20 to install the cup holder. 1. Store the tether strap by attaching the tether hook to the slot...
Page 26 - Keep hands away from the RAPIDLOCK lock-off
26 INSTALL REAR-FACING WITH VEHICLE SEAT BELT 10 10. Remove vehicle seat belt slack. Press down firmly near the front of the base. Pull on the shoulder belt to tighten while feeding the slack back in the retractor. Do not pull on the belt with excessive force. If the belt is too tight, you will not ...
Page 27 - See page 46 “Securing Child With 5-Point Harness”
27 INSTALL REAR-FACING WITH VEHICLE SEAT BELT 13. Place your child in the seat and secure the child with the 5-point harness. See page 46 “Securing Child With 5-Point Harness” 14. With your child secured, rotate the seat to the rear-facing position. The seat is secure when you hear a “CLICK!” Pull o...
Page 28 - INSTALL REAR-FACING WITH LOWER ANCHOR ATTACHMENT
28 INSTALL REAR-FACING WITH LOWER ANCHOR ATTACHMENT 2 Make sure the cup holder is installed before installing the seat in your car. See the “Features” section on page 20 to install the cup holder.Review your vehicle’s owner’s manual for LATCH location and use. Do not install by this method for a chi...
Page 32 - Do not pull on the strap with excessive force.
32 INSTALL REAR-FACING WITH LOWER ANCHOR ATTACHMENT 11. Attach the lower anchor connectors to the vehicle’s lower anchors. Make sure the arrows are pointing up. Lower anchor attachment can only be used if the vehicle lower anchor spacing is 11” (28 cm) from the center of one lower anchor to the cent...
Page 34 - FORWARD-FACING SAFE USE; Continue reading on the
34 FORWARD-FACING Forward-Facing: 26 . 5-65 lb (12-30 kg) and 49” (125 cm) or less. * • Place the car seat forward-facing in the vehicle back seat. • Make sure lower anchor strap or vehicle seat belt is routed through the forward-facing belt path, marked with a orange label. • Install this car seat ...
Page 35 - INSTALL FORWARD-FACING WITH VEHICLE SEAT BELT WITH TETHER; INSTALL FORWARD-FACING WITH VEHICLE SEAT BELT AND TETHER
35 INSTALL FORWARD-FACING WITH VEHICLE SEAT BELT WITH TETHER INSTALL FORWARD-FACING WITH VEHICLE SEAT BELT AND TETHER 1 2 Make sure the cup holder is installed before installing the seat in your car. See the “Features” section on page 20 to install the cup holder. 1. Store the lower anchor connector...
Page 40 - INSTALL FORWARD-FACING WITH LATCH
40 INSTALL FORWARD-FACING WITH LATCH INSTALL FORWARD-FACING WITH LATCH Make sure the cup holder is installed before installing the seat in your car. See the “Features” section on page 20 to install the cup holder.Review your vehicle’s owner manual for LATCH location and use. Do not install by this m...
Page 46 - SECURING CHILD WITH 5-POINT HARNESS; WARNING! In cold weather, do not put snowsuits
46 SECURE CHILD - 5-POINT HARNESS 1. Loosen harness straps. Push down on the harness release lever ot the front of the seat while pulling out on the harness straps at the chest clip (A). Unbuckle the chest clip (B) and the buckle (C). Place harness straps off to the sides. 2. Place your child in the...
Page 50 - ACCESSORIES
50 ACCESSORIES Head and Body Support with the Lower-Seat Pad • The head and body support must be used if shoulders are below the lowest harness setting. • Never allow head and body support to bunch or fold behind child. To install, thread the head support straps through the headrest and use the fast...
Page 52 - VEHICLE INFORMATION; CHOOSING VEHICLE SEAT LOCATION
52 VEHICLE INFORMATION In the event there is no available back seat and / or you have no other option than to place a child other than an infant in a rear-facing car seat in a front passenger seating position, the National Highway Traffic Safety Administration (NHTSA) recommends that you take the fo...
Page 53 - LATCH / LOWER ANCHOR ATTACHMENT SYSTEM; HOW TO REMOVE LOWER ANCHOR CONNECTORS AND TETHER
53 VEHICLE INFORMATION LATCH / LOWER ANCHOR ATTACHMENT SYSTEM LATCH stands for Lower Anchors and Tethers for CHildren . LATCH consists of lower anchors and tether anchors, which are built-in to your vehicle, and connecting hooks that are built-in to your car seat. Lower anchors are used INSTEAD of t...
Page 54 - UNSAFE VEHICLE SEAT BELTS; Lap Only Seat Belt
54 VEHICLE INFORMATION Motorized Shoulder Belt with Lap Belt Belts Forward of the Seat Crease Lap or Shoulder Belt Mounted on Vehicle Door UNSAFE VEHICLE SEAT BELTS WARNING! The following types of vehicle seat belts are NOT compatible with this child seat . If any of the belt types listed are in the...
Page 55 - LAP/SHOULDER SEAT BELT INSTALLATION - HARNESS MODE
55 VEHICLE INFORMATION There are two different types of vehicle seat belts that can be used with this car seat: LAP/SHOULDER SEAT BELT INSTALLATION - HARNESS MODE Always review your vehicle owner’s manual for specific information about your vehicle seat belts. There are three types of retractors: EL...
Page 56 - HOW TO LOCK YOUR LAP/SHOULDER VEHICLE SEAT BELT; Sliding Latch Plate and Switchable Retractor
56 VEHICLE INFORMATION HOW TO LOCK YOUR LAP/SHOULDER VEHICLE SEAT BELT Sliding Latch Plate and Switchable Retractor A latchplate that slides freely on the belt webbing and cannot, by itself, hold the belt snug around a car seat. When installing the car seat, route the vehicle seat belt through the p...
Page 58 - LAP BELT INSTALLATION; Locking Latch Plate and No Retractor
58 VEHICLE INFORMATION LAP BELT INSTALLATION Always review your vehicle owner’s manual for specific information about your vehicle seat belts. Locking Latch Plate and No Retractor When installing the car seat, route the lap seat belt through the proper path and buckle it in. Then, pull upwards on th...
Page 59 - Headrest Pad; CLEANING SEAT PAD
59 CARE & MAINTENANCE Clean the seat pad with a damp sponge using mild soap and cool water. Refer to seat pad care tag for washing instructions. Headrest Pad If needed, headrest pad may be removed for cleaning. To remove, first raise the headrest to its highest position. Then unsnap the two snap...
Page 60 - Seat Pad
60 CARE & MAINTENANCE Seat Pad If needed, the seat pad may be removed for cleaning. To remove, unsnap the two snaps in the seat. Then, pull out the two plastic buttons on the front of the car seat. Note: You may have to rotate the seat to access the two buttons. Lower the headrest to its lowest ...
Page 64 - REPLACEMENT PARTS; To purchase parts or accessories in the United States,
64 Baby Jogger, LLC Newell Brands Inc. • 5 Concourse Parkway, 8th Floor • Atlanta, GA 30328 www . babyjogger . com REPLACEMENT PARTS To purchase parts or accessories in the United States, please contact us at the following: www.babyjogger.com or 1-800-241-1848 Store instruction manual in the slot wi...
