Axor 6405000 - Manual
Axor 6405000 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – ThermoBalance II Deck Valve
- Page 3 – Do not plug either outlet.
- Page 4 – Install the rough; Install the plaster shield.
- Page 5 – Install the hot and cold water supply; Wrap the threads on the hot and cold supply pipes; Install the outlet lines*; If only one outlet is to be used,; hot inlet
- Page 6 – slot
- Page 7 – Set the high temperature limit stop (optional); Hold the handle lever in one hand.
- Page 8 – Maintenance: Clean the filters; Failure to hold the stop unit steady
- Page 9 – User instructions
- Page 10 – Replacement parts
ThermoBalance II Deck Valve
Metris S
06401XX0
Focus S
06405000
Solaris E
06450XX0
Stratos E
06451XX0
Metro E
06452XX0
Talis S
06453XX0
C Cross
06454XX0
C Scroll
06455XX0
C Lever
06456XX0
Solaris² E
04172XX0
Allegro² E
04185XX0
Metro² E
04198XX0
Installation Instructions / Warranty
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Was this manual helpful?
About this manual
- Brand
- Axor
- Model
- 6405000
- Document type
- Manual
- Language(s)
- English
- Pages
- 12
- File size
- 3.9 MB
- Format
Summary
2 ThermoBalance II Deck Valve 06401XX0 Metris S 06405000 Focus S 06450XX0 Solaris E 06451XX0 Stratos E 06452XX0 Metro E 06453XX0 Talis S 06450XX0 06451XX0 06452XX0 06453XX0 06454XX0 06455XX0 06456XX0 06401XX0 06405XX0 06454XX0 C Cross 06455XX0 C Scroll 06456XX0 C Lever 04172XX0 Solaris² E 04185XX0 A...
3 04198XX0 04172XX0 04185XX0 Technical Specification Recommended pressure 45 - 72 psi Maximum hot water temp. 165° F* Recommended hot water temp. 120° - 140° F* Flow rate @ 44 PSI 8 gpm Safety stop 100° F 1/2" female NPT inlets Maximum mounting surface thickness 1 3/8" Hole size in mounting ...
4 Install the rough Rest the rough on the mounting surface.Tighten the lower mounting ring and washer. Tighten the tensioning screws. Install the plaster shield. Remove the upper mounting ring.Screw the lower mounting ring and washer to their lowest position.Insert the rough up through the hole. Ins...