Axor 3802XX1 - Manual
Axor 3802XX1 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Uno Single-control Lavatory Faucet 38020XX1
- Page 3 – Installation; Place the faucet and sealing ring on the mounting; Use two wrenches, as shown in the; Install the drain pull
- Page 4 – Set the high temperature limit stop (optional)
- Page 5 – Install the pop-up drain; Attach the swivel connector to the end of the
Axor Uno
38020XX1
Axor Uno
38210XX1
Axor Uno
38025XX1
Installation Instructions / Warranty
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 Installation Considerations For best results, Hansgrohe recommends that this unit be installed by a licensed, profes- sional plumber.Please read over these instruc- tions thoroughly before begin- ning installation. Make sure that you have all tools and supplies needed to complete the instal- latio...
3 Installation Place the faucet and sealing ring on the mounting surface.Install the friction washer, metal washer, and mounting nut. Tighten the mounting nut by hand.Check the position of the faucet. When satisfied, use a slot-headed screwdriver to tighten the tensioning screws. Connect the hot and...
4 Set the high temperature limit stop (optional) Remove the screw cover, located on the back of the handle.Use a 4 mm allen wrench to loosen the screw. Remove the handle Remove the flange and the green high temperature limit stop ring.Install the high temperature limit stop ring so that the black po...
