Axor 38000XX1 - Manual
Axor 38000XX1 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 3 – Installation Instructions; Flush the supply lines thoroughly before installation.
- Page 4 – Pop-up Drain Installation
- Page 5 – Set the high temperature limit stop
- Page 6 – Cleaning Recommendation for Hansgrohe Products; Replacement Parts
- Page 7 – Limited Lifetime Consumer Warranty
90925401-01 05/2005
Uno
Single Control Lavatory with Zero Handle
38000XX1
Single Control Bidet with Zero Handle
38200XX1
Installation Instructions / Warranty
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
3 Installation Instructions Flush the supply lines thoroughly before installation. If the mounting surface is 3/16"thick or less, cut the centering ring so that it is as thick as the countertop. If the mounting surface is greater than 3/16", leave the centering ring intact. • Place the fauce...
4 Pop-up Drain Installation • Remove the plunger assembly (1, 2). • Unscrew the drain outlet flange (3) from the tee (8). • Unscrew the tailpiece (9) from the tee (8). Wrap the threads with plumbers’ thread tape and replace. • Install the white, flexible sealing gasket (4) to the flange (3). Sit it ...
5 Set the high temperature limit stop (optional) • Turn off the water at the supply stops – usually located under the sink. Turn on the faucet to confirm that the water is off. • Close the drain OR cover it with a wash cloth. Gently pry off the screw cover or use the 4 mm hex wrench to push the scre...
