Axor 34316XX1 - Manual
Axor 34316XX1 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Technical Information; Recommended water pressure; Installation Considerations; Axor Citterio M Wall-mount Lavatory Faucet with Baseplate
- Page 3 – Installation; the surface of the finished wall
- Page 5 – Wrap the threads on the connecting thread with Teflon; Do not overtighten the connecting thread!; (3) Push the baseplate against the wall. Install the handle
- Page 7 – User Instructions; Pivot the handle up to turn the water on.
- Page 8 – Replacement parts
- Page 9 – Cleaning Recommendation for Hansgrohe Products
- Page 10 – Limited Lifetime Consumer Warranty
Installation Instructions / Warranty
Axor Citterio M
34316XX1
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Technical Information Max. flow rate . gpm Max. water pressure 145 psi Recommended water pressure 14.5 – 7 psi Recommended hot water temp. 10°F – 140°F* *Know and follow all applicable local plumbing codes when setting the temperature on your water heater. Installation Considerations Rough valve 103...
3 Seal the wall around the plaster shields with waterproof sealant.Failure to seal the wall can lead to possible water damage. Installation Remove the covers. Trim the plaster shields so that they extend 1/16” outside the surface of the finished wall Use a 17 mm deep socket wrench to remove the cart...
5 Add 1 ¾” to this measurement.Cut the connecting thread so that it is X + 1 ¾” long. Wrap the threads on the connecting thread with Teflon tape (1). Use an 8 mm Allen wrench to install it in the rough (). Do not overtighten the connecting thread! (3) Push the baseplate against the wall. Install the...
