Axor 32073XX1 - Manual
Axor 32073XX1 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Technical Information / Données techniques / Datos técnicos
- Page 4 – Installation; Use two wrenches, as; English
- Page 5 – Install the pop-up drain; Remove the plunger assembly.
- Page 6 – Set the High Temperature Limit Stop (optional); Replace the flange. Replace the handle screw. Use
- Page 7 – Installez la tirette.; Assurez-vous que les tuyaux ne; Français
- Page 8 – Installation de l’obturateur à clapet; Dévissez la collerette du raccord en T.
- Page 10 – Instalación; Apriete los tornillos tensores con un destornillador.; No permita las mangueras se; Español
- Page 11 – Retire el conjunto del émbolo.
- Page 14 – Replacement Parts / Pièces détachées / Repuestos
- Page 16 – Cleaning Recommendation for Hansgrohe Products; Recommandations pour le nettoyage des produits Hansgrohe
- Page 17 – Recomendación de limpieza para los productos de Hansgrohe
- Page 18 – Limited Lifetime Consumer Warranty
Talis
32070XX1
32073XX1
Installation Instructions / Warranty
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Recommended water pressure Pression d’eau recommandée Presión recomendada en servicio 15 - 75 psi Max. water pressure Pression d’eau maximale Presión máximo en servicio 145 psi Recommended hot water temp. Température recommandée pour l’eau chaude Temp. recomendada del agua caliente 120° – 140°F * Ma...
Installation Position the faucet and sealing ring on the mounting surface. Install the friction washer, metal washer and mounting nut. Tighten the mounting nut by hand. Tighten the tensioning screws. Install the pull rod. Connect the supply hoses to the stops. Use two wrenches, as shown in the diagr...
Install the pop-up drain Attach the swivel connector to the end of the horizontal rod. Attach the swivel connector to the end of the pull rod. Position as desired and tighten with a small, flat bladed screwdriver. Remove the plunger assembly. Unscrew the drain outlet flange from the tee. Unscrew the...
