Axor 10145XX1 - Manual
Axor 10145XX1 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 3 – Technical Information; Do not install this faucet on a sink with a raised lip.
- Page 4 – Installation notes; not; Do not bend or twist the supply hose!
- Page 5 – Installation; Tighten the hoses with two wrenches, as shown, to
- Page 6 – Temperature adjustment -
- Page 7 – Wait 30 seconds
- Page 8 – Battery Replacement
- Page 9 – Clean the aerator and filters; If the water flow is reduced over time, clean the aerator; Starck; At another sink, rinse the filters and the aerator or spray former.
- Page 10 – Place a hand in front of the sensor to turn the faucet on
- Page 11 – Cleaning
- Page 12 – Change the Spray Former
- Page 13 – Reduce the Sensor Range
- Page 14 – Replacement Parts; Maintenance note
- Page 15 – Limited Lifetime Consumer Warranty; Cleaning Recommendation for Hansgrohe Products; Cleaning Materials for Faucets and Showers
Starck
10101XX1
10140XX1
Starck
10106XX1
10145XX1
Starck X
10170001
10175001
10180001
10185001
Installation Instructions / Warranty
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Starck 10101XX1/10106XX1/10140XX1/10145XX1 Starck X 10170001/10175001/10180001/10185001 Technical Information Recommended water pressure 15 - 58 psi Max. water pressure 58 psi Max. hot water temp. 176 o F* Recommended hot water temp. 10 o F - 140 o F* Flow rate 1. gpm Battery CR-P / 6 V Lithium Auto...
4 Installation notes • Flush the hot and cold supplies thoroughly before installing the faucet. Damage to the faucet caused by debris is not covered under the warranty. • The hot and cold supplies should be of equal pressure. • The faucet should not be used with a con- tinuous flow water heater. • D...
5 Installation Position the faucet on the sink or countertop (1). Install and tighten the mounting nut (). Tighten the tensioning screws (). Connect the /8” adapters to the stops (4). Connect the hoses to the adapters (5). Tighten the hoses with two wrenches, as shown, to prevent the hoses from twis...