Avocent 5224 - Manual

Confi guring basic network parameters

Perform the following confi guration if using a terminal or terminal

emulator connected in step 3. If using DSView 3 management

software or another appliance-specifi c confi guration method, see the

relevant documentation.

WARNING:

Whatever method you use for confi guration, make

sure to change the root password from “cyclades” for security.

a. Start a terminal session connecting to the appliance console

port: ANSI emulation, 9600 speed, 8 bit data length, no

parity, 1 stop bit and no fl ow control.

b. Log in as the root user by using the default

password cyclades.

c. Enter the passwd command and change root’s password.

d. Enter the cli command. The cli> prompt appears.

e. Activate the primary Ethernet interface and confi gure

basic network parameters, including a static IP address

for the appliance.

cli> set network interface eth0 active yes method\

static address <appliance_IPaddress> gateway\

<gateway_IPaddress> netmask <netmask> broadcast\

<broadcast_IPaddress>

This quick install guide shows how to install the SP manager and

assign it an IP address needed for remote confi guration of users

and devices.

Prerequisite knowledge for administrators and users is in the

MergePoint 5224/5240 Service Processor Manager User

Guide. If Avocent DSView

®

3 management software is being

used to manage the appliance, see the DSView 3 Management

Software Installer/User Guide.

Connecting power to the switch

NOTE:

On appliances with two power supplies, connect

each supply to a separate power source.

Make sure the appliance power switches are off.

For AC models, plug the power cord(s) into the appliance and

plug the other end(s) in grounded AC power source(s). For

DC models, wire the terminal block(s) to separate DC power

sources. Turn on the power switch(es).

Connecting to the network

Connect a standard Ethernet cable from the primary 10/100/GE

(Gigabit Ethernet) public port to the network. For additional

options for confi guring the secondary 10/100 Ethernet port,

including setting up failover, see the MergePoint 5224/5240

Service Processor Manager Installer and Administrator Guide.

Connecting devices

Connect a standard Ethernet cable from any of the private

Ethernet ports on the appliance to any of the following types of

Ethernet ports on the other end:

• A dedicated Ethernet port on a

service processor

• A dedicated Ethernet port on a router or similar device that

allows access to the device’s console

• A dedicated Ethernet port on a blade server managing

multiple blade service processors

Connecting a terminal for confi guration of a static

IP address

Connect a terminal or a computer running a terminal emulation

program to the console port using the DB-9 to RJ-45

crossover cable.

NOTE

: This step is optional if the appliance is going to

be managed by DSView 3 management software; the

appliance can be discovered and assigned an IP

address automatically.

f. Confi gure a hostname, a DNS domain, a primary DNS server

and an optional secondary DNS server.

cli> set network hostname <appliance_hostname>\

cli> set network resolv domain\

<domain_name> dns0\

<DNSserver_IPaddress> dns1\

<optional_second_DNSserver_IPaddress>

g. Save the changes.

cli> commit

h. Exit the cli utility.

cli> quit

i. Log out.

j. Confi gure user authorizations, authentication and access to

devices, either using the appliance Web Manager or

DSView 3 software.

If using the Web Manager, enter the IP address in a browser to bring

up the Web Manager.

If using DSView software, enter the IP address to bring up the

DSView software client.

For additional information

For more installation details and for how to confi gure target devices

and users, see the MergePoint 5224/5240 Service Processor

Manager Installer and Administrator Guide.

Quick Installation Guide

MergePoint

TM

5224/5240

Service Processor (SP) Manager

The following instructions will allow you

to set up your MergePoint 5224/5240

service processor manager easily.

To Contact Avocent Technical Support CALL (888) 793-8763 VISIT www.avocent.com/support DOWNLOAD Check out the latest software from our web site at: www.avocent.com

Avocent, the Avocent logo, The Power of Being There, DSView and MergePoint are trademarks or registered trademarks of Avocent Corporation or its affi liates. All other marks are the property of their respective owners. © 2007 Avocent Corporation. All rights reserved.

590-676-501A

Console User

To connect a MergePoint 5224/5240 SP manager

1

2

3

4

5

1

2

3

4

Ethernet

Remote User