Avanti HRS88N1B - User Manual
Avanti HRS88N1B Security System – User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Automatic Door Opening:
- Page 3 – Rubber Feet; Avanti Products
- Page 4 – PRINTED IN CHINA
MODEL HRS88N1B
SECURITY SAFE
INSTALLATION AND USAGE INSTRUCTIONS
Your Avanti Room Security Safe is supplied with the following:
1 – Security Safe Unit
2 – Emergency Access Keys
1 – Installation / Usage Guide
4 – 1.5V Batteries
1 – Felt Liner
Installation Screws
4 – Rubber Feet
INSTALLING YOUR SECURITY SAFE
When installing your safe, be sure the location is sturdy enough to support the unit and is both
secure and easy to access.
Safe can be installed onto either a concrete or wooden surface.
When installing use a 25/64” (10mm) drill bit and screws.
To prevent removal of your security safe, it is recommended to use Allen type screws (not included)
to affix the unit to the installation location.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
INITIAL SETUP AND CONFIGURATION. After you have installed the unit in its final location, proceed to set up digital access controls. 1) Using the emergency Access Key, open the safe. 2) Open the battery compartment cover. 3) Following the image shown in the battery compartment install 4 AA sized bat...
Additional Instructions: Manual Operation (Open using the key). • User will need to remove the key hole cover by placing a small pin or similar object in the hole below the keyhole and key hole cover. • Insert the emergency access key into the lock and turn clockwise to open the safe. • While the do...