Audiovox K-13 - Manual

Audiovox K-13

Audiovox K-13 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
9 Page 9
10 Page 10
Page: / 10

Table of Contents:

  • Page 2 – Required tools for installation:; Two people are required for installation; 892110 Bracket Kit 1
  • Page 3 – Remove the 4 Phillips screws securing the face of the console.
  • Page 7 – Step 3) Install console to floor of vehicle.; Set the console on the floor over the vehicle.
  • Page 8 – Step 4) Install the VCP into the console.; Remove the VCP from the box.
  • Page 9 – Step 5) Install the TV into the console.; Place the television on the shelf of the console.
  • Page 10 – Step 6) Replace the rear shroud and face of console.; Reinstall the four Phillips screws that held the face to the body.
Loading the manual

Page1 of 10

P/N 8007131

Rev. C 1/12/99 BJ


ASA Electronics TV/VCP Floor Console

Model K-13 Without Harness and Antenna

12 Volt DC powered remote controlled 13” television AVT-1475
12 Volt DC powered remote controlled VHS Video Cassette Player AVP-7000

Installation Instructions











Audiovox Specialized Applications, LLC.

“The Mobile Electronics Company”

23319 Cooper Drive

Elkhart IN 46514

1 (219) 264-3135

www.audiovox.com

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 2 - Required tools for installation:; Two people are required for installation; 892110 Bracket Kit 1

Page2 of 10 P/N 8007131 Rev. C 1/12/99 BJ This manual contains specific instructions on how to install this automotive TV/VCP floor console. Please read this manual thoroughly before installing the console into the vehicle. **WARNING** In order to maintain a safe mounting system, this console MUST b...

Page 3 - Remove the 4 Phillips screws securing the face of the console.

Page3 of 10 P/N 8007131 Rev. C 1/12/99 BJ There are six (6) steps to install the K-13 TV/VCP floor console: Step # 1 Disassemble shroud Step # 2 Install brackets and straps Step # 3 Mount the console on the floor of the vehicle Step # 4 Install the VCP Step # 5 Install the TV Step # 6 Replace the co...

Page 7 - Step 3) Install console to floor of vehicle.; Set the console on the floor over the vehicle.

Page7 of 10 P/N 8007131 Rev. C 1/12/99 BJ Step 3) Install console to floor of vehicle. ⇒ BEFORE DRILLING ANY HOLES VERIFY THAT THE DRILL BIT WILL NOT ENTER INTO THE FRAME RAIL(S) OF THE VEHICLE, ELECTRICAL WIRES, FUEL LINES, BRAKE LINES, HOSES, EXHAUST SYSTEMS OR ANY OTHER ITEMS THAT WILL IMPAIR THE...

Other Audiovox Models