ATN ATN 4X12 - Manual
ATN ATN 4X12 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 3 – FEATURES
- Page 4 – MOUNTING; Slightly loosen the fixing screws on the; FOCUSING; Viewing the sun can cause; LOCKING MECHANISM; OPERATING
- Page 5 – Be sure gun is not loaded.; ELECTRONIC RETICLE
- Page 6 – ADDED SURVIVABILIT Y; MAINTAINING YOUR RIFLE SCOPE; Iron Backup Sights for back-up
- Page 7 – WARRANTY
AMERICAN
TECHNOLOGIES
NETWORK
CORP.
u s e r ` s g u i d e
ATN 4
X
12
°
S.W.A.T. RIFLESCOPE
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
The information in this manual furnished for information use only, is subject to change without notice, is not to be construed as a commitment by ATN Corp.ATN Corp. assumes no responsibility or liability for any errors or inaccuracies that may appear in this book.©2003 ATN Corp. All right reserved. ...
3 4 MOUNTING 1. Slightly loosen the fixing screws on the weaver rail built into the scope. 2. Place the scope on the dovetail mount of the fire arm making certain that the mount aligns with the receptor attach-ment screw groove. Adjust as neces-sary. 3. Tighten the fixing screws. NOTE: Receptor atta...
3 4 WINDAGE AND ELEVATION The vertical and horizontal adjustments for the ATN 4X12° SWAT can be achieved by turning the elevation and windage adjustment mechanisms (remove dust caps first). Each click equals to 1/8 inches at 100 yards. When reaching the maxi-mum of rotation do not use force. ZEROING...
