Atlona AT-LINE-PRO2 - Manual

Page 2 - TABLE OF CONTENTS

1. Introduction .................................................. 2 2. Features .................................................. 2 3. Package Contents .................................................. 2 4. Operation Controls and Functions .................................................. 3 4.1 ...

Page 3 - INTRODUCTION

Atlona Scaler Box is designed to upscale digital/analog video signal from Composite, S-Video, PC, Component (HD) and HDMI input sources, to digital HDMI output of wide-range HDTV and PC resolutions, up to 1080p and WUXGA (1920 x 1200.) Besides video upscaling, the scaler box also converts digital/an...

Page 4 - In OSD menu, use the ENTER button to confirm the selection; OPERATION CONTROLS AND FUNCTIONS

4.1 Front Panel 1. POWER Button and LED Indicator: Press the button to turn ON/OFF the power of the unit. The LED will illuminate when the power is turned on. 2. IR remote control sensor.3. Input Selection Buttons and LED Indicators: Press each of the buttons (CV/SV/COMP/PC/HDMI) to select the desir...

Page 5 - Used for remote control and firmware updates.

4.2. Rear Panel 1. HDMI OUT and CO-AX OUT: Connect the HDMI OUT port to the HDMI input port of your display such as HDTV. Connect the CO-AX OUT port to the Coaxial (S/PDIF) input port of your amplifier for separate digital audio output. 2. AUX IN Input: When the video signal input through the HDMI I...

Page 8 - Remote Controller

* The connection between AT-LINE-PRO2 and remote controller with RS-232 modem cable. Pins definition of modem cable AT-LINE-PRO2 Remote Controller PIN Definition PIN Definition 1 NC 1 NC 2 TxD 2 RxD 3 RxD 3 TxD 4 NC 4 NC 5 GND 5 GND 6 NC 6 NC 7 NC 7 NC 8 NC 8 NC 9 NC 9 NC * RS-232 transmission forma...

Page 10 - PC MODE PHASE 0-63 ADJUST

Command Code Response Description S PICTURE MODE 0-3 > PICTUREMODE STANDARD-USER 0:STANDARD; 1 :MOVIE; 2:VIVID;3:USER, PICTURE MODE OUTPUT S CONTRAST 0-100 > CONTRAST 0-100 CONTRAST 0-100 ADJUST [Defaut:50] S BRIGHTNESS 0-100 > BRIGHTNESS 0-100 BRIGHTNESS 0-100 ADJUST [Defaut:45] S HUE 0-10...

Page 12 - V DC power supply; SPECIFICATIONS; Resolution

6.1. General Specification • Frequency bandwidth: 1.65Gbps (single link) • Input Ports: Composite x 1 / L7R x 1 S-Video x 1 / L/R x 1 Component (3 RCA) x 1 / UR x 1 PC D-Sub (15-pin) x 1 / 3.5mm Phone Jack x 1 HDMI x 1 / 3.5mm Phone Jack x 1 (for DVI) Coaxial (S/PDIF) x 1 • Output Ports: HDMI x 1 Co...

Page 13 - CONNECTION AND INSTALLATION

Resetting the device to original settings: While the unit is plugged in to the Power Supply: 1. Press and hold the MENU button.2. Unplug the Power Supply from the backand wait 5 seconds.3. Plug the Power Supply back in and release the MENU button.4. The unit should now be reset to its default settin...

Page 14 - SAFETY INFORMATION

Safeguards Precautions FCC regulations state that any unauthorized changes or modifications to this equipment, not expressly approved by the manufacturer, could void the user’s authority to operate this equipment. Operate this product using only the included external power supply. Use of other power...

Page 15 - Coverage; Coverage Periods; Remedy

Atlona, Inc. (“Atlona”) Limited Product Warranty Policy Coverage Atlona warrants its products will substantially perform to their published specifications and will be free from defects in materials and workmanship under normal use, conditions and service. Under its Limited Product Warranty, Atlona, ...

Page 16 - Atlona, Inc Product Registration; Disclaimers

Atlona, Inc Product Registration Thank you for purchasing this Atlona product. - We hope you enjoy it and will take an extra few moments to register your new purchase. Registration creates an ownership record if your product is lost or stolen and helps ensure you’ll receive notification of performan...

Atlona AT-LINE-PRO2 - Manual

Table of Contents:

Summary

Other Atlona Models