Atlona AT-BAT-DIS7PRO - Manual
Atlona AT-BAT-DIS7PRO – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
atlona.com
Toll free: 1-877-536-3976
Local: 1-408-962-0515
Panel Guide
IN port:
The Micro USB port is used to recharge the AT-BAT-DIS7PRO. Connect to a PC or wall port
to charge. Depending on the start level, it can take 3 to 4 hours to fully recharge the battery.
Power button:
Press once to turn AT-BAT-DIS7PRO on. Pressing a second time will display the
current power level on the back panel LEDs.
NOTE:
The power button will not turn off the battery. The AT-BAT-DIS7PRO will auto turn off after
30 seconds of no connection.
OUT Port:
Use this port to power other devices such as AT-DIS7-PROHD or AT-HD800
Power:
Green LED will light up when power is on. LED will
be off while battery is recharging.
25%:
Red LED will light up when checking power if at
least 1% power is remaining.
50%:
Red LED will illuminate if at
least 26% power is left in the
AT-BAT-DIS7PRO
75%:
Red LED lights up when at least
51% power is remaining.
100%:
will light up when the
AT-BAT-DIS7PRO has at least 76%
power remaining.
NOTE:
LEDs will blink while charging until the next
power level is reached, then it will go solid.
Ex. 25% will go solid at 26% and 50% will start blinking.
Clip to a pocket and go. The fully portable
AT-BAT-DIS7PRO is a rechargeable
accessory for the AT-DIS7-PROHD and
AT-HD800, allowing them up to 4 hours
of use.
Atlona 4 Hour Portable Battery
AT-BAT-DIS7PRO
LED Guide
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
