Atlas Sound M1000 - Manual

M1000 Masking Speaker

M1000

With a good majority of America’s workplaces having
adopted an open office plan, favoring a labyrinth of
cubicles over traditional closed offices, conversational
privacy has become an increasingly sensitive issue. A
properly designed sound masking system can significantly
increase speech privacy and improve the overall work
environment.

The new

M1000

masking speaker assembly is designed

to accurately reproduce the needed spectrum of masking
signal into the plenum space. The innovative 734 cubic
inch square enclosure ensures ample low frequency
response. A specially designed 8" dual cone loudspeaker
is included in the package. A high efficiency 70.7V internal
transformer is coupled to an external selector switch for
easy system tuning. For more precise adjustments, a wide
selection of wattage taps ranging from,

1

⁄

4

watt to 4 watts

plus off are provided.

The exclusive Atlas Sound EZ hang brackets simplify
installation. This innovative suspension system utilizes (2)
collapsible galvanized hangers configured to allow quick
upward or side firing installation. The hangers are factory-
installed on the unit and fold flat for shipping. To meet
most any local code requirement, the

M1000

includes an

innovative cover containing both knockouts and a strain
relief. This system will allow the use of rigid or flexible
conduit (if required) and easily accommodates "through"
connections on the removable plate. To fit continually
shrinking construction budgets, the

M1000

is very

aggressively priced. Contact your regional Atlas Sound
representative for details.

• Five Year Limited Warranty •

1601 Jack McKay Blvd.
Ennis, TX 75119
AtlasSound.com
Tech Support 1.800.876.3333

Printed in the USA
Specifications are subject to change without notice.

©2004 Atlas Sound LP. Atlas Sound is a trademark of Atlas Sound LP. All rights reserved.

ATS001157 RevB 9/04

000904

484077

Features

• Pre-Assembled Unit Includes 8" Dia. Loudspeaker,
Transformer, Enclosure, Baffle and Mounting Hardware
• Labor-Saving Hardware Package – Complete with
New Snap Hanger Assembly, Allows Quick and
Easy Installation
• Innovative Input Panel Includes Combination
Knock-out and Strain Relief Connector to
Accommodate Flexible or Rigid Conduit

• Design Enables Upward or Horizontal Sound
Dispersion
• 734 Cubic Inch Enclosure for Extended Low
Frequency Response
• Black Epoxy Finish Blends with Open Ceiling Plans
• Suitable for Use Above Suspended Ceiling Systems
• UL 1480 & 2043 Listed

SPECIFICATIONS

MODEL LOUDSPEAKER MAGNET WEIGHT TRANSFORMER TAPS

ENCLOSURE

SOUND DISPERSION WEIGHT

M1000

8" DUAL CONE

10 oz. (260g)

off, .25, .5, 1, 2 and 4

VOLUME

DIMENSIONS

Upward, Downward

and Horizontal

9 Lbs.

3.4 kg.

734 Cubic in. 11

9/16

"L x 11

9/16

"W X 5

1/12

"H

(243 X 243 X 140MM)