ATEN AS-8144B - Manual
ATEN AS-8144B – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Selects ports by button and software code operation.; Installation; Turn off all devices.
- Page 3 – Operation
- Page 4 – AS; Appendix; Specifications
- Page 6 – Limited Warranty
AS-8144B/AS-8441B Manual
file:///F:/aten/manuals/OEM/APC/Group1/as8144b/as8144b.html
1 of 6
11/19/04 12:15 pm
4-In-1-Out / 1-In-4-Out
(Reversible)
Bitronics Auto Switch
AS-8144B/AS-8441B
User's Manual
Read this manual thoroughly and follow the installation procedures carefully to
prevent any damage to the unit and/or the devices it connects to.
©Copyright 1997-2004 Aten® International Co., Ltd.
Manual Part No. PAPE-1109-100
Printed in Taiwan 05/1997
All brand names and trademarks are the registered property of their respective owners.
Packing Checklist
1 x AS-8144B/AS-8441B
1 x User's Manual
1 x 3.5" Diskette (AS-8144B only)
If anything is damaged or missing, contact your dealer.
NOTE:
This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
AS-8144B/AS-8441B Manual file:///F:/aten/manuals/OEM/APC/Group1/as8144b/as8144b.html 2 of 6 11/19/04 12:15 pm commercial environment. This equipment generates, uses and can radiate radio frequencyenergy and, if not installed and used in accordance with the instruction manual, may causeharmful interf...
AS-8144B/AS-8441B Manual file:///F:/aten/manuals/OEM/APC/Group1/as8144b/as8144b.html 3 of 6 11/19/04 12:15 pm cables. Connect the Bitronics Auto Switch to the printer with a DB-25 to C-36 male-to-male cable. 3. Set DIP switch segment 3 - located on the side panel - to 4 > 1 mode. 4. Set DIP switc...
AS-8144B/AS-8441B Manual file:///F:/aten/manuals/OEM/APC/Group1/as8144b/as8144b.html 4 of 6 11/19/04 12:15 pm Once the job is done, the switch returns to Auto mode and begins scanning again. To exit Auto Mode, press the port selection pushbutton. 1-to-4 Mode (AS-8144B only) In 1-to-4 Mode you can ei...
