Page 3 - Packing List
Packing List The complete Master View ACS-1208L / ACS-1216L package consists of: M 1 ACS-1208L or ACS-1216L KVM Switch M 2 Custom KVM Cable Sets M 1 Power Adapter with Power Cord M 1 User Manual M 1 Quick Start Guide M 1 LCD OSD Quick Reference Check to make sure that the unit was not damaged in shi...
Page 4 - Contents
Contents Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2Hardware Requirements . . . . . . . . . . . . . . . ....
Page 5 - Overview
Overview The Master View ACS-1208L and ACS-1216L KVM Switches are control units thatallow access to multiple computers from a single console (keyboard, mouse, andmonitor). Before the development of the Master View, the only way to controlmultiple computer configurations from a single console was thr...
Page 6 - Features
Features w Integrated KVM Console - Including a 15" LCD Monitor - In a 1U HighSlideaway Housing For Convenient Rack Mounting w Space Saving Technology - A Single Console Controls Up To 8 (ACS-1208L)or 16 (ACS-1216L) Computers w Daisy Chain Up To 31 Additional Units - Control Up to 512 Computer...
Page 7 - Hardware Requirements; Computers; Cables
Hardware Requirements Computers The following equipment must be installed on each computer: w A VGA, SVGA or Multisync card. Note: Since the integrated LCD monitor’s maximum resolution is 1024 x 768, make sure that the computer resolution settings do not exceed1024 x 768. w A 6-pin mini-DIN (PS/2 st...
Page 8 - Introduction
Introduction ACS-1208L / ACS1216L Front View 1. Handle Pull to slide the KVM module out; push to slide the module in. 2. Cover After sliding the KVM module out, flip up the cover to access the LCDmonitor, keyboard and trackball. 3. Port LEDs Port LEDs provide status information about their correspon...
Page 11 - Installation; Before you Begin; Single Station Installation
Installation Before you Begin 1. Make sure that power to all the devices you will be connecting up have been turned off. 2. To prevent damage to your equipment due to ground potential difference, make sure that all devices on the installation are properlygrounded. Consult your dealer for technical d...
Page 12 - Daisy Chaining
Daisy Chaining To control even more computers, up to 31 additional Master View ACS-1208 /ACS-1216 units can be daisy chained down from the First Station. Note: The ACS-1208 and ACS-1216 are similar in all respects to the ACS-1208L and ACS-1216L, except that they come in standardhousings. They do not...
Page 14 - Operation; Hot Plugging; Powering Off and Restarting
Operation Hot Plugging The ACS-1216L supports hot plugging - components can be removed andadded back into the installation by unplugging their cables from the ports withoutthe need to shut the unit down. In order for Hot Plugging to work properly,however, these procedures that must be followed: M Sw...
Page 15 - Port ID Numbering; Port Selection
Port ID Numbering Each CPU port on a Master View installation is assigned a unique Port ID. ThePort ID is made up of two parts: a Station Number, and a Port Number: w The Station Number - a two digit number which reflects the ACS-1208L /ACS-1216L’s position in the daisy chain sequence. This correspo...
Page 16 - Hotkeys; Hotkey Port Control
Hotkeys Hotkey Port Control Hotkey Port Control allows you to provide KVM focus to a particular computerdirectly from the keyboard. The Master View ACS-1208L / ACS-1216L providesthe following Hotkey Port Control features: w Selecting the Active Port w Auto Scanning w Previous/Next Switching w Invoki...
Page 20 - OSD Operation; OSD Overview
OSD Operation OSD Overview The On Screen Display (OSD) is used to handle all computer control andswitching procedures. All procedures start from the OSD Main Menu. To pop upthe Main Menu, tap the [Scroll Lock] key twice. Note: You can optionally change the Hotkey to the Ctrl key (see OSD Hotkey, p. ...
Page 21 - OSD Navigation; OSD Main Screen Headings
OSD Navigation w To dismiss the menu, and deactivate OSD, Click the X at the upper rightcorner of the OSD Window; or press [Esc]. w To Logout, press [F8], or Click F8, on the OSD Menu Bar. w To move up or down through the list one line at a time, Click the Up andDown Triangle symbols ( ▲▼ ) or use t...
Page 22 - OSD Functions
OSD Functions OSD functions are used to configure and control the OSD. For example, youcan: rapidly switch to any port; scan selected ports only; limit the list you wish toview; designate a port as a Quick View Port; create or edit a port name; or makeOSD setting adjustments. To access an OSD functi...
Page 31 - Appendix
Appendix ACS-1208L - Computer Connection Table The following tables indicate the relationship between the number of MasterView Units and the number of computers that they control: MVs Computers MVs Computers MVs Computers MVs Computers 1 1 - 8 9 121 - 136 17 249 - 264 25 377 - 392 2 9 - 24 10 137 - ...
Page 32 - Removing the KVM Module
Removing the KVM Module For maintenance convenience, the KVM module can be removed from the unitchassis. To do so: 1. Remove the four module attachment screws 2. Unplug the data cable 3. Pull the KVM module away. Note: The slider brackets and extender arm go with the KVM module. 2002-01-15 28 ACS-12...
Page 33 - OSD Factory Default Settings; Troubleshooting
OSD Factory Default Settings The factory default settings are as follows: Setting Default OSD Hotkey [Scroll Lock] [Scroll Lock] Port ID Display Position Upper Right Corner Port ID Display Duration 3 Seconds Port ID Display Mode The Port Number plus the Port Name Scan Duration 5 Seconds Scan/Skip Mo...
Page 34 - Specifications
Specifications Function ACS-1208L ACS-1216L ComputerConnections Direct 8 16 Max 504 (via Daisy Chain) 512 (via Daisy Chain) Port Selection OSD (On Screen Display); Hotkeys LEDs On Line Port 8 (Orange) 16 (Orange) Selected Port 8 (Green) 16 (Green) Power 1 (Blue) Computer Port Connectors 8 x SPDB-15 ...
Page 35 - Limited Warranty
Limited Warranty IN NO EVENT SHALL THE DIRECT VENDOR’S LIABILITY EXCEED THE PRICE PAIDFOR THE PRODUCT FROM THE DIRECT, INDIRECT, SPECIAL, INCIDENTAL ORCONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THE PRODUCT, DISKOR ITS DOCUMENTATION. The direct vendor makes no warranty or representation, express...
