ATD ATD7325 - Manual
ATD ATD7325 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – SAFETY and GENERAL INFORMATION; Save these instructions.; PRODUCT DESCRIPTION; SPECIFICATIONS; Inspect before each use.
- Page 3 – PREPARATION; Assembly
- Page 4 – OPERATION; WARNING
- Page 5 – MAINTENANCE; TROUBLESHOOTING
- Page 6 – Replacement Parts Illustration for ATD7325; REPLACEMENT PARTS
- Page 7 – Replacement Parts List for ATD7325
- Page 8 – ONE YEAR LIMITED WARRANTY
MagicLift™
Service Jack,
Low Profile
Model
ATD7325
Printed in China
ATD7325-M3 rev 07/10
Capacity
2 Ton
This is the safety alert symbol. It is used to alert you to potential personal injury hazards.
Obey all safety messages that follow this symbol to avoid possible injury or death.
!
!
ADVERTENCIA
• Leer, comprender, y seguir las instrucciónes antes
de utilizar el aparato.
• El manual de instrucciónes y la información de
seguridad deben estar comunicado en lengua del
operador antes del uso.
• No seguir estas indicaciónes puede causar daños
personales o materiales.
!
WARNING
To avoid
crushing and related injuries
:
NEVER
work on, under or around a
load supported only by a hydraulic
jack.
ALWAYS
use adequately rated
jack stands.
U.S. Patent No’s. 6,199,379 • 5,946,912
Operating Instructions & Parts Manual
ATD Tools Inc.
160 Enterprise Drive, Wentzville MO 63385
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 SAFETY and GENERAL INFORMATION Save these instructions. For your safety, read, understand, and follow the information provided with and on this jack before using. The owner and/or operator of this equipment shall have an understanding of this jack and safe operating procedures before attempting to...
Figure 1 - ATD7325 Nomenclature Rear Caster Handle Saddle Lifting Arm Front Wheel Vent Screw (under cover plate, on reservoir) Handle Sleeve 3 PREPARATION Assembly Insert handle into the handle sleeve. Tighten the bolt on handle sleeve to prevent accidental removal of handle while in use. Before Use...
4 ! OPERATION Lifting Only attachments and/or adapters supplied by the manufacturer shall be used. Lift only on area of the vehicle as specified by the vehicle manufacturer. 1. Follow the vehicle manufacturer’s recommended guidelines for lifting. Engage the emergency brake and chock each unlifted wh...
